Description
Used original Japanese imported Komatsu 16th generation 3 ton forklift three-door frameFD30T-16 model, the highest rise 4.5 metersdiesel forklift for sale
The overall length of the 3-ton forklift (without forks) is 2713mm, the overall width is 1225mm, the overall height (at the top guard) is 2702mm, and the minimum turning radius is 2400mm.
1. Rated lifting capacity: refers to the maximum weight of the cargo that can be lifted when the distance from the center of gravity of the cargo to the front wall of the fork is not greater than the distance between the load centers, expressed in T (tons). When the center of gravity of the goods on the fork exceeds the specified load center distance, the lifting capacity should be reduced accordingly due to the limitation of the longitudinal stability of the forklift.
2. Load center distance: refers to the horizontal distance T from the center of gravity to the front wall of the vertical section of the fork when a standard cargo is placed on the fork, expressed in mm (millimeters).
3. Maximum lifting height: The maximum lifting height refers to the vertical distance between the upper surface of the horizontal section of the fork and the horizontal ground where the forklift is located when the forklift is fully loaded and the goods are raised to the highest position on a flat and solid ground.
4. Gantry inclination angle: refers to the maximum inclination angle of the gantry forward or backward relative to its vertical position when the unloaded forklift is on a flat and solid ground. The function of the forward inclination angle is to facilitate fork picking and unloading of goods; the function of the rear inclination angle is to prevent the goods from slipping off the fork when the forklift is running with goods.
5. Maximum lifting speed: usually refers to the maximum speed at which the goods are lifted when the forklift is fully loaded, expressed in m/min (m/min).
6. Maximum travel speed: Increasing the travel speed has a great impact on improving the working efficiency of the forklift. For an internal combustion forklift with a lifting capacity of 1T, the minimum travel speed when fully loaded is not less than 17m/min.
7. Minimum turning radius: When the forklift is running at low speed with no load and turning with full steering wheel, the minimum distances from the outermost and innermost sides of the car body to the turning center are called respectively outside the minimum outer turning radius Rmin and within the minimum inner turning radius rmin .
8. Minimum ground clearance: The minimum ground clearance refers to the distance from the fixed lowest point on the vehicle body to the ground other than the wheels, which indicates the ability of the forklift to cross the raised obstacles on the ground without collision.
9. Wheelbase and wheelbase: The wheelbase of the forklift refers to the horizontal distance between the center lines of the front and rear axles of the forklift. Wheelbase refers to the distance between the centers of the left and right wheels on the same axle. Increasing the wheelbase is beneficial to the longitudinal stability of the forklift, but increases the length of the body and the minimum turning radius. Increasing the wheel base is beneficial to the lateral stability of the forklift, but it will increase the overall width of the body and the minimum turning radius.
Our Services
1,Pick you up from the airport
2,Book comfortable hotel
3,show you around the famous places in shanghai
4,taste some local snacks
5,Gratuitous translation and guide service provided
Certificate
------------------------------------------------------------------------------------------------------------------------------------------Transport
-----------------------------------------------------------------------------------------------------------------------------------------
Complaint
