Q69 Tunnel Type Steel Plate Steel Structure Shot Blasting Painting Machine

Min.Order: 1

Product origin: Qingdao, Shandong, China

Infringement complaint:

Complaint

US$ 10000 ~ 100000

Description

Steel structure shot blasting machine is mainly used for steel plate and profile surface cleaning, welding stress removing and coating adhesion ability improving. The machine has been widely used in shipbuilding, locomotive, bridge building, machinery and steel structure fabrication industry.

Feature:

1.This Steel structure shot blasting machine use high speed cantilever centrifugal type turbine blast wheels. Curve blades blast wheel has more blasting force to process steel products.

2.Material of blades, abrasive distributor, and control cage is high chrome, which can be used over 500 hours. Another option is Taiwan made special material blades, which has 1000-1500 hours lifetime.

3.Blasting cabinet liner material is casted Manganese steel 13, which has good hardness and impact force absorbing ability, which makes its life longer than one year. Another option is rolled Manganese steel, which has life more than two years.

4.Roller conveyor is controlled by frequency converter, which can adjust moving speed to fit for different blasting purpose.

5.Full shutter type air wash separator has three steps separating, which effectively separate dust and abrasive. It is good for abrasive recycle, improve cleaning effect and protect the machine.

6.Blowing nozzles are used at end of chamber to blow off the remaining steel ball and dust.

7.Pulse jet bag type dust collector, dust remove efficiency is over 99%. Good for environmental protection. Cartridge type dust collector is optional.

8.Safety protection, electrical interlock, failure self detection and alarming function. Full range of automatic control.

9.ABB motor, SEW gear box, SKF/NSK bearings, SIEMENS/Mitsubishi PLC, Mitsubishi/SIEMENS touch screen, Schneider electric components are optional selection.

If the machine is not suitable for your workpiece, please tell us the following infromation:
1) What kind of workpiece will you clean?
2)The size of workpieces(length, width and height of maximum workpiece,Length, width and height of minimum workpiece?)
3)How many the weight of maximum and minimum workpiece?
4)Please tell us your requirement cleaning efficiency?

Technical parameter of pass-through type shot blasting machine Q69
No.	Model Item		Q698	Q6912	Q6915	Q6920	Q6925	Q6930	Q6940
1	Width of workpiece	mm	800	1200	1500	2000	2500	3000	4000
2	Size of inlet opening	mm	800* 1600	1200* 400	1500* 400	2000* 400	2500*800	3000*800	4000*400
3	Length of workpiece	mm	1200- 12000	1200- 6000	1200- 12000	1200- 12000	3000-12000	2400-12000	4500-18000
4	Roller speed	m/min	0.5-4	0.5-4	0.5-5	0.5-4	0.5-4.5	0.5-4	2-8
5	Thickness of plate	mm	3-60	3-60	1.5-60	3-60	3-60	3-110	4.5-110
6	Abrasive flow rate	kg/min	8*120	4*250	4*250	6*250	6*250	6*360	8*360
7	Abrasive initial fill	kg	4000	4000	4000	4500	4500	8000	11000
8	Adjusting height of rolling brush	mm	400	200	350	450	600	850	900
9	Ventilation capacity	m3/h	22000	17560	19000	19550	27758	28050	38000
10	Total power of shot blast machine (no dust collector)	kw	90	78.3	113.6	156.6	224.55	204.8	293.6

Qingdao Antai Heavy Industry Machinery Co., Ltd.

Qingdao Antai Heavy Industry Machinery has founded in 2003, formally changed to its current name in 2011. Located in the beautiful west coast of Qingdao, it is only 30 km to Qingdao seaport, convenient for export transportation. Our workshop area covers more than 15000 square meters, it is a research, design, manufacture, installation and consulting factory company for the surface finishing, environmental protection and foundry solution. Antai Group and China University of Petroleum jointly established the Qingdao Antai Haibo Technology R&D Center Co., Ltd., which focuses on the research and development of new practical equipment for shot blasting. The technical department also has many senior engineers and professional 3D designers with more than ten years of design experience. The chief engineer of the Technology R & D Center has 30 years of design experience and was hired as the chairman of the China Foundry Machinery Standards Committee to participate in the formulation of national standards for surface cleaning equipment in China. Company has extensive experience and brings the technical and professional workers together, mainly produces shot blasting machine, sand reclamation equipment, molding equipment, and dust collector. Qingdao Antai is strong at providing non-standard design and manufacture according to customer specific needs. Qingdao Antai shot blasting technology will amaze you with its intelligent design, innovative details and particularly durable components. We offer you an overall solution, as we have our own development, engineering, production and after-sales service. All systems are inspected and tested prior to delivery in our workshops to ensure fast installation on site and deliver a reliable product on time every time.Here at Qingdao Antai, after-sales support is also a top priority so we ensure that you get all the help you need with your newly delivered and tested system.Our greatest reward is the satisfaction of our customers with the results achieved thus far. The company has passed ISO9 0 0 1: 2 0 0 8, ISO 1 4 0 0 1: 2 0 04, CE certificate. Our company management strictly according to international standards ISO9 0 0 0 quality system implementation operation. We have established long term partnership with international brand suppliers, such as ABB motor; SEW gear box, Mitsubishi/OMRON/SIEMENS electric components, SMC cylinder, SKF & NSK bearing, and Asco pulse valves. With quality products, competitive price and attentive service, our products are widely sold in domestic market and exported to Amercia, Germany, Russia, Australia, India ,Greece, Sri Lanka, Vietnam, Pakistan, Uruguay, Ecuador, Colombia, Israel, Ukraine, Bangladesh, Uzbekistan, Philippines, Hungary, Macedonia and Indonesia etc. We always adhere to "honesty is the best selling, personalized service is the final product. Customer satisfaction is the greatest impetus to the development of enterprises." Aim to establish a perfect quality management system and network information feedback system for filing separately for each customer, to provide customers with maximum caring and thoughtful, efficient and flexible full service. We look forward to working with you and your company's sincere cooperation!

Forward

Related products