Complaint
-40-85 Working Degree DI DO AI AO Voltage Current Remote I/O PLC Codesys SCADA System Alalog Current IO
- the module supports two channels of SSI encoder input.
- each encoder channel supports SSI absolute encoder signal input.
- each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.
- each encoder channel supports 1 digital output signal with an output voltage of 5Vdc.
- the module internal bus and field input adopt magnetic isolation
- the module carries 16 LED indicators.
- the module supports the maximum clock frequency of 2MHz.
- the encoder reading interval time could be set.
- The data bit length and the start and end bit positions could be set.
Our remote IO model list:
| CT-1228 (new) | CT-1228:8 channels digital Intput/24VDC/source type, NPN, supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input low level is valid |
| CT-1218 | CT-1218:8 channels digital Intput/24VDC/sink type, PNP,supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input high level is valid |
| CT-121F | CT-121F:16 channels digital Intput/24VDC/sink type, PNP,supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input high level is valid |
| CT-222F | CT-222F: 16 channels digital Output, source, PNP, 24Vdc/0.5A,the output voltage is 24VDC, the output high level is valid |
| CT-122F | CT-122F: 16 channels digital input, source, NPN, 24VDC, supports counting function(Max. counting frequency of 200Hz),the input voltage is 0V, the input low level is valid |
| CT-221F | CT-221F:16 channels digital Output/24VDC/0.5A/sink type, NPN,the output voltage is 0V, the output low level is valid |
| CT-124H | CT-124H: 32 channels digital input, sink or source, 34Pin male connector, 24Vdc, counting function supported (counting frequency up to 200Hz) |
| CT-222H | CT-222H: 32 channels digital output, source, 24Vdc/0.5A,34Pin male connector |
| CT-2224 | CT-2224 4-channel digital output ,Source type, 5.5-40VDC ,single channel Max output. 3.3a /4 channel with Max output. 2A per channel. Channels can be used in parallel |
| CT-2228 | CT-2228:8 channels Digital Output ,source,PNP,24Vdc/0.5A, the output voltage is 24VDC, the output high level is valid |
| CT-2718 | CT-2718:8 channels Relay Output ,( 9~30Vdc@2A,[email protected], [email protected]) |
| CT-3168 | CT-3168:8 channels Analog Input,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,15 bits/16 bits,Single-end |
| CT-3238 | CT-3238:8 channels analog input/ 0& 4-20mA/15-bit,single ended |
| CT-3268 | CT-3268:8 channels analog input/-20~20mA/15-bit,single ended |
| CT-3713 | CT-3713:3 channels Analog Input,RTD(PT100) |
| CT-3723 | CT-3723:3 channels Analog Input,RTD(PT1000) |
| CT-3804 | CT-3804:4 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
| CT-3808 | CT-3808:8 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
| CT-4154 | CT-4154:4 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,16 bits,Single-end |
| CT-4158 | CT-4158:8 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,16 bits,Single-end |
| CT-4234 | CT-4234:4 channels analog output, 0& 4-20mA/16-bit,single ended |
| CT-4238 (new) not available for sale | CT-4238:8 channels analog output, 0& 4-20mA/16-bit,single ended |
| CT-5102 | CT-5102: 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 5V output, 32bit, Max input frequency of 1.5MHz2 way 5V output, 32bit, Max input frequency of 1.5MHz |
| CT-5112 | CT-5112: 2 channels encoder/24V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 24V output, 32bit, Max input frequency of 1.5MHz. |
| CT-5122 | CT-5122: 2-channel encoder/SSI input |
| CT-5142 | CT-5142: 2-channel encoder/differential input/quadrature decoding, direction pulse, high-speed counting, 2-channel DI, 2-channel DO, 32bit, maximum input frequency 10MHz |
| CT-5321 | CT-5321:serial port communication sub-module (RS232, RS485,RS422, either serial port is optional, it supports modbus-RTU /ASCII,master or slave mode, transparent transmission mode) |
| CT-5711 | CT-5711:Fieldbus Extended Master Module( CT-5711 need work with CT-5721) |
| CT-5721 | CT-5721:Fieldbus Extended Slave Module ( CT-5711 need work with CT-5721) |
| CT-5801 | CT-5801:Terminal module as extra module, take no module channel, ( required for each network adapter) |
| CT-623F | CT-623F:8 channels / digital input / 24VDC / source or sink type &8 channels / digital output / 24VDC / source type, single output channel max current 500mA |
| CT-7220 | CT-7220:Expansion power Supply( System power input 24Vdc,Output 5Vdc/2A,Field power input 24Vdc,Output 24Vdc/8A) take no module channel. CT-7220Power Supply Extension Module required as BOM included a 15 module rack, aslo IO Config software noticed the decreasing "Total Residual Current", |
| MTE034 | MTE034: Din Rail, 32 channels male connector,spring terminal connection ( accessories for CT-124H and CT-222H ) |
| DX210-3SFX-2000 | Length 2 meters, flame retardant material, flexible wire, both ends are female connector ( accessories for CT-124H and CT-222H ) |
| General Parameters | |
| Power | [email protected] |
| Isolation | I/O to internal bus: magnetic isolation (3KVrms) |
| Field Power | Nominal:24Vdc, Range:20-28Vdc |
| Wiring | Max.1.5mm² (AWG 16) |
| Mounting Type | 35mm DIN-Rail |
| Size | 115*14*75mm |
| Weight | 65g |
| Environment Specification | |
| Operational Temperature | -40~85ºC |
| Operational Humidity | 5%-95% (No Condensation) |
| Protection Class | IP20 |
| Input Parameters | |
| Channel Number | 2-channel encoder |
| LED Indicator | 16 channel input LED indicator |
| Encoder signal type | Differential signal, 5V |
| Data frame length | 10-40 bit |
| Position value length | Maximun of 32 bit |
| Position value format | Supports gray code or binary |
| Location value LSB/MSB | Settable |
| SSI encoder clock frequency | ≤2MHz |
| DI turn-on voltage | Min.5Vdc to Max.28Vdc |
| DI turn-off voltage | Max.2.7Vdc |
| DI turn-on current | Max.5mA/channel@28V |
| DI input impedance | >10.0kΩ |
| DI input delay | OFF to ON: Max.3ms ON to OFF: Max.2ms |
| DO output voltage | 5V,range ±10% |
| DO output current | Max.500mA |
| DO output sink current | Max.5uA |
Dimension
Wiring terminal
Installation
DIN-rail
1.How could i get the manual, technical detail and software?
You can click the software & manual page to download the realted product details or contact us to get it.
2.Do you have after sale support?
Yes we provide all the realted technical support including remote support.
And We will provide you any necessary online training and support too.
3. What is the warranty?
All the ODOT products is with the warranty of 3 years.
Only ODOT-S7PPI/PPI V2.0 is with a warranty of 1 year.
4. How is the payment terms?
100% T/T in advance.
5. What is your shipping channel?
We support all the main stream courier company including: Fedex, TNT, DHL, UPS, and Aramex.
6. What is your lead time?
We will arrange the delivery in 1~ 2 day if we have finished products in stock.
If we have no stock and the lead time will be 1~2 weeks.
7. Do you provide any customized services?
Yes, please contact us with your application details.
We accpet deep customized services including OEM, ODM and there will be a MOQ.
8. Do you accept cooperation as distributors?
Yes, partner and distributorship inquiry are warmly welcomed.
