Blastracs Shot Blasting Machine Asphalt Road Shot Blasting Machine

Portable Road Shot Blasting Machine For Steel Plate And Road Surface Cleaning

Road surface shot blasting machine is used for concrete surface laitance, clean up to remove impurities, and can undertake dozen hair treatment on the surface of concrete, make its surface even rough, greatly improving the adhesive strength of the waterproof layer and concrete base, so that the waterproof layer and bridge deck better combination, and at the same time the crack of concrete can be fully exposed, have the effect of nip in the bud.

 

Road shot blasting machine is the use of motor driven and wind wheel produced in the process of high speed rotating centrifugal force, a certain granularity of projectile into abrasive grit tube (can control the flow of the projectile) are accelerated to high speed turning points in round abrasive grit, under the action of centrifugal force, the projectile by thrown into the directional set points pills round window, through the directional window (control abrasive grit throw direction) of the throw, picked up, by high-speed rotating blade and along the length direction of blade continuously accelerated motion until the throw, throw the pellets formed certain type fan beam, plane to play the role of a blasting impact work.

The pellets then travel with dust and impurities through the bounce chamber to the top of the storage hopper.

The high-power dust collector separates pellets and dust through the separation device above the storage hopper. Pellets enter the storage hopper for continuous circulation use, and dust enters the dust collector through the connection pipe.

When the dust enters the dust collector, it is separated by the filter element and stays in the ash storage hopper to neutralize the surface of the filter element.

Automatic back - blowing dust remover can clean each filter element automatically through the back - blowing air provided by the compressor.

Finally, through the air flow cleaning of matching vacuum cleaner inside the machine, the pellets and impurities cleaned down are separately recovered, and the pellets can be reused.

The shot blasting machine is equipped with a dust remover, which can achieve dust-free and pollution-free construction, not only improve the efficiency, but also protect the environment.

Road Shot Blasting Machine Technology Data
NO.	Name	Road Shot Blasting Machine
1	Model	BRTK-270	BRTK-350	BRTK-550	BRTK-850	BRTK-1000
2	Machine Size	L:1950mm	L:1950mm	L:1950mm	L:1950mm	L:1950mm
		W:450mm	W:550mm	W:720mm	W:1020mm	W:1170mm
		H:1200mm	H:1200mm	H:1200mm	H:1200mm	H:1200mm
3	Range	270mm	350mm	550mm	850mm	1000mm
4	Blast Wheel Power	11kw	15kw	2*11kw	2*15kw	2*18.5kw
5	Running Motor	0.75kw	0.75kw	1.1kw	1.5kw	2.2kw
6	Dust Collector Fan	4kw	4kw	4kw	7.5kw	7.5kw
7	Blast Wheel Dia.	200mm	200mm	200mm	200mm	200mm
8	Blow Fan	3Kw	3Kw	3Kw	4Kw	4Kw
9	Running Speed	0.5-20m/min	0.5-20m/min	0.5-20m/min	0.5-20m/min	0.5-20m/min
10	Dust Collector Pipe Dia.	120mm	120mm	150mm	200mm	200mm
11	Suggest Steel Shot	1.0-1.5mm	1.0-1.5mm	1.0-1.5mm	1.0-1.5mm	1.0-1.5mm
12	Steel Shot Donsumption	100g/m2	100g/m2	100g/m2	100g/m2	100g/m2
13	Dust Collector	DC-5	DC-5	DC-8	DC-11	DC-14
14	Machine weight	About 580kg	About 700kg	About 1100kg	About 1300kg	About 1600kg
15	Cleaning Eficiency	Concrete≥2.7m2/min	Concrete≥3.5m2/min	Concrete≥5.5m2/min	Concrete≥8.5m2/min	Concrete≥10m2/min
		Steel Plate≥1.5m2/min	Steel Plate≥1.8m2/min	Steel Plate≥2.8m2/min	Steel Plate≥4.3m2/min	Steel Plate≥5m2/min
Basic Standard:
1	Shot Blasting Machine : 1 Set
2	Dust Collector: 1 Set
3	Pipe :20m
4	Wire:23m
5	Flat Car:10 Sets
6	Collect sand car:1 Set
7	Impeller :1 Set			Impeller :2 Set
8	Directional set: 1 Set			Directional set: 2 Setm

 




















Our service:
1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. UEM&UBM are welcomed.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory : We are manufacturer, specializing in producing all kinds of machinery for more than 20 years, competitive with good quantity.
7.Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.
8.As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.