Good Quality Used 10000L Water Truck Large Quantity in Stock

Min.Order: 1

Product origin: Wuhan, Hubei, China

Infringement complaint:

Complaint

US$ 18000 ~ 24000

Description

Good Quality Used 10000L Water Truck Large Quantity In Stock

Water tank truck is produced for transportation and distribution of industrial and drinking water, spraying and washing of streets and
tunnels, dust and environmental control and fire fighting purposes.

In order to achieve those different operations, each water tanker truck could be equipped with various components to realize different
funcion. The material of the tanker could be carbon steel, stainless steel, aluminum alloy.

Truck Specification
Chassis model		BJ5182GSS-1
Cab		Foton one and half row cab, with power steering,with a/c
Driving Type		4*2 Left hand driving
Max Speed (km/h)		90
Overall dimension(mm)		8110x2500x3160
GVW( kg)		18000
Mass in working order ( kg)		7004
Wheelbase(mm)		4600
F/R track base (mm)		2010/1865
F/R overhang (mm)		/
Approach/Departure Angel		/
Tire		6+1/11.00R20
Clutch		Single-plate dry diaphragm spring clutch φ430
Steering		Hydraulic steering with power assistance AM75L
Gear box		9JS119T-B(Q) 9-speed
Bridge	Front axle	/
	Rear axle	13T
Engine	Model	WP10.270E32
	Fuel Type	Diesel fuel
	Type	Water-cooled, four-stroke, with exhaust valve brake, direct injection, supercharged and inter-cooled
	Exhaust(ml)	9726
	Max output power/rotate speed (hp /rpm )	270/2200
	Max torque/rotate speed(N.m/rpm)	1100/1200-1600
Braking system	Service Brake	Double loop pneumatic drum
	Park Brake	Energy storage spring cut-off brake
	Auxiliary brake	Engine exhaust brake
Eletric system		24v
Upper-Body specification

A.TANK BARREL
1. Tank Profile	Round shape
2. Test pressure	Hydrostatic test to5 psi (35 Kpa) on each compartment. 5pas (35Kpa)
2. Test pressure
3. Working pressure	Atmospheric.
4. Capacity	10000L plus 3~5% ullage. 10000L+3-5%
5. Compartments	Single compartment.
6. Interior weld finish	Not polished or grinded (W-0). ,
7. Exterior weld finish	Not polished or grinded (W-0). ,
8. Shell material	Stainless steel 304 2B. 304 2B
a) Top	3.7mm nominal. 3.7mm
b) Sides	3.7mm nominal. 3.7mm
c) Bottom	3.7mm nominal. 3.7mm
9. End Plate	Stainless steel 304 2B, 3.7mm nominal. 3.7mm
9. End Plate	All single heads dished and flanged.
10. Bulkhead	Nil.
11. Baffle / Surge Heads	Stainless steel 304 2B, 3.7mm nominal. 3.7mm
	Dished with flap.
	1 pcs.1
12. Spill molding and rollover protection	Stainless steel around the dome with drain hose.
13. Spill molding lids	Nil.
14. Outer rings	304-2B stainless steel, 60mm height, 3mm nominal, continuously welded. 304 2B, 60mm,3mm,
14. Outer rings
15. Frame	Carbon steel independent.
16. Loaders and brackets	Carbon steel.
16. Loaders and brackets	Carbon steel.
15. Isolation	Nil.
16. Exterior lining	Nil.
B. TANK FITTINGS AND PIPING
B. TANK FITTINGS AND PIPING
1. Manholes	20" diameter with 6 stainless steel wing nuts, located at the top center
1. Manholes	1 pc. 2061
2. Pressure Vacuum Vent	Two per compartment. 6~12 kPa pressure, 2~4 kPa vacuum.
	2,6~12 kPa , 2~4 kPa
	Chinese Brand

6.Foot valve	Nil.
7. Discharge system	3" diameter discharge with 3" diameter butterfly valve, 3" stainless steel male camlock coupling and quick cap, located at the back of the tank. ,
7. Discharge system
8. Piping	Nil.
9. Thermometer	Nil.
10. Steam trace	Nil.
11. Overfill Prevention	Nil.
12. Tow Hook	Nil.
13. Product Indicators	Nil.
13. Product Indicators	Nil.
C. ACCESSORIES
1. Ladder	Stainless steel, 400mm wide, with non skid rungs and lateral handles, mounted at right middle of tanker. ,400mm,

2. Walkway	Extruded aluminium around dome.
	Extruded aluminium around dome.
3. Hose Carries	1 no, hose carrier (round tubes) to fit Ø159 x 6meter (236") hose close type complete with brackets to be installed at the right side.
4. Hose	Firemen type flexible discharge hoses, 30m 3" for discharge. and flexible plastics suction hoses, 5.9m 3"for suction, 3" female camlock coupling at both ends. 3,30
5. Motor Pump	BRIGGS & STRATTON Gasoline motor , 4 stroke motor, fuel tank capacity 4.0 liters of gasoline, WB30 pump with a 3" input and outlet diameter, 7m suction head, discharge capacity 900L/min (238Gal/min) pump head pressure 33 m, weight 30kg. +WB 30
6. Toolbox	Nil.
7. Rear Bumper	Aluminium member to accommodate light assembly and number plate to cover full width of the tank. ,.
	Steel bumper with ground clearance 500mm approx.
	500mm
9. Hazchem Plate	Nil.
10. Mudguard	Aluminum over suspension and the upper coupler.
10. Mudguard	Mud flaps rigid plastic at the rear.
11. Lights & Wiring	24V. ISO 1185 7 pin socket. 24,ISO 1185
	Harness: oil and vapour proof cable.
	Front: nil.:
	Side:
	Mark lamp 3Pcs/side, LED.3LED
	Reflector 3Pcs/side 3
	Turning lamp 1Pcs/side, LED.1
	Rear Bump:
	Reverse lamp R-L 2Pcs. 2
	Turning lamp R-L 2Pcs. 2
	Brake lamp R-L 2Pcs. 2
	Register plate light
	Rear top: YES. :
	Brand of Wiring: Phillips
	:
12. Reverse alarm	Nil.
13. Connector Box	At the center in the front dishend
14. Sticker	50mm wide red-white reflective sticker, mounted at both sides and rear bump. 50mm
15. Hand rail	Nil.
16. Fire Extinguisher	8kg , 2Pcs. 8
16. Fire Extinguisher	Carbon steel extinguisher holder located on the landing gear on the curb side.
17. Drains hose	water drains hose 2", installed at the back of spill molding2
17. Drains hose
18. Wheel chocks	Nil.
19. Traffic cone	Nil.
21. Spare wheel bracket	1set,
21. Spare wheel bracket	Carbon steel, basket type, located behind the landing gear.
21. Painting	Polyurethane medium Aluminium gray, applied over epoxy primer on carbon steel elements,