Description
Customized products Ingersoll Rand 22111975 Filter Relacement Screw Air Compressor Part Oil Separator
Maintenance of the oil separator
The oil separator is a component that separates the screw lubricating oil from the compressed air. Under normal operation, the service life of the oil and gas separator is about 3000 hours, but the quality of the lubricating oil and the filtering accuracy of the air affect its life, Have a huge impact.
It can be seen that the maintenance and replacement cycle of the air filter element must be shortened in the harsh environment, and even the installation of a pre-air filter is considered.
The oil separator must be replaced when it expires or the pressure difference between the front and back exceeds 0.12Mpa.Otherwise, the motor will be overloaded, the oil separator will be damaged and the oil will run out.
High Quality Oil Separator 22111975 For Ingersoll Rand Compressor
| Replacement P/N | 22111975 |
| Application | apply for air compressor parts |
| Residual Oil | <3PPM |
| MOQ | 1piece |
| packing | cartons with bags |
| Working Life | >5000h |
How to repair or replace the oil separator?
- Open separator container and replace separator filter.
- Make sure the new filter is the same size as the old filter, no matter how long or short, make sure to adjust the length of the scavenger.
- Be sure to use the shim provided, as these shim contain metal conductors, which prevent the accumulation of static electricity in the separator, which may cause sparks or explosions in the separator vessel.
Replacement steps of the built-in oil separator:
- Stop the screw air compressor, close the outlet of the air compressor, open the drain valve, and confirm that the system has no pressure.
- Disassemble the pipeline above the oil and gas barrel, and at the same time remove the pipeline from the outlet of the pressure maintaining valve to the cooler.
- Remove the oil return pipe of the air compressor.
- Remove the fixing bolts on the oil and gas barrel, and remove the upper cover of the oil and gas barrel.
- Remove the oil and gas separator and replace it with a new one.
- Install them in the order of removal.
| Air compressor Model | Separator | Air Filter | Oil Filter |
| Small UP | 22388045 | 88171913 | 39329602 |
| UP5-11/15/22 | 54749247 | 89295976 | 54672654 |
| UP5-30/37 | 54749247 | 22203095 | 54672654 |
| M22S | 54595442 | 39588470 | 39907175 |
| M37S | 54595442 | 39588777 | 39907175 |
| M45 | 22089551 | 39708466 | 39911615 |
| M55-75 | 54601513 | 39708466 | 39911631 |
| M55S-75S | 39894597 | 39708466 | 39911631 |
| M90-110/160 | 54509427 | 39903281 | 39911631 |
| M90-110/160 | 54509427 | 39903281 | 39911631 |
| M132-160 | 54509427 | 39903281 | 39911631 |
| M200-250 | 22219174 | 39903265 | 92888262 |
| XF/EP/HP/XP75-100 | 42841239 | 99267031 | 99270134 |
| XF/EP/HP/XP75-100 | 42841239 | 99267031 | 42841361 |
| XF/EP/HP/XP75-100 SE | 39894597 | 42855403 | 42841361 |
| XF/EP/HP/XP75-100 SE | 54601513 | 42855403 | 42843771 |
| XF/EP/HP/XP 125-200 | 42841247 | 99266702 | 99274060 |
| XF/EP/HP/XP 125-200 | 39799578 | 99266702 | 99274060 |
| XF/EP/HP/XP 125-200 | 42841247 | 99273906 | 42843805 |
| XF/EP/HP/XP 125-200 | 39739578 | 99273906 | 42843789 |
| 125S/150S/175S/200S | 39863865 | 39903281 | 39856836 |
| M90/M110/M132/M160 | 99277998 | 39903281 | 39911631 |
| M90/M110/M132/M160 | 54509427 | 39903281 | 39911631 |
| VHP600/700 | 92062132 | 92035948 | 99274060 |
| VHP600/700 | 92062132 | 92035955 | 99274060 |
| S100 | 42841239 | 99267031 | 42843797 |
| S200 | 42841247 | 99266702 | 42843805 |
Tips:
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time.
Scavenge line does not reach into internal bowl at the base of the separator.
Result: high oil carry over
End of scavenge line seats against base of bowl forming a seal. No oil, or an insufficient quantity is sucked up by the scavenge line. Compressor manufacturer's gap clearance is normally 1 to 2 mm alternatively, ensure tapered cut to end of scavenge line.
Result: high oil carry over
- Scavenge line blocked with dirt
Result: high oil carry over
- Scavenge line filter blocked
Some compressor models are fitted wit a small stainless steel mesh filter at some point in the scavenge line which is to be cleaned on a regular basis. If not cleaned the filter will block resulting in no scavenge action.
Result: high oil carry over.
- Scavenge line cracked / damaged
Allows atmospheric air to be ingested and insufficient or no oil removed from separator.
Result: high oil carry over.
Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment.
Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.
https://compressorseparator.en.made-in-china.com/product/OFIGZqdHKSpw/China-Atlas-Copco-Air-Oil-Separator-1614905600-Relacement-1622314001-2901162600-for-Screw-Compressor-Spare-Parts.html
Q: Are you trading company or manufacturer ?A: We are factory, you are very welcome to visit our factory at your convenience.Q: What products do you supply?A: FT Filter is a professional manufacturer of air compressor filters with rich experience. Mainly supplying: Replacement and customized filters of air compressors; Air compressor parts; Line Filters; Vacuum Pump Filters; Hydraulic Filters, for many air compressor brands.Q: Could I get some samples?A: Yes, we can supply the sample, but the customers should bear logistics costs at first.Q: How long is your delivery time?A: If there is stock, the lead time is about 2 working days after we get the payment. The specific delivery time depends on models and the quantity of your order.Q: What's Minimum Order Quantity of your air compressor part?A: the MOQ is 1pc, need you pay for the delivery cost.Q: Can I become an Agent / DISTRIBUTOR of FT Filter?A: Welcome! Please confirm the cooperation details and distributor qualification requirements with us, We have full advantages on quality and competitive price.
Complaint
