Defibrillator Waveform: Biphasic Charge Time: Less than 7 seconds with a new fully charged battery. Energy Display: Monitor display indicates both selected and delivered energy. Charge Prompt Type: Voice and visual prompts. Electrode Impedance Measurement Range: 0-250 ohms.
ECG Monitoring Patient Connection: 3-lead ECG cable, or 5-lead ECG cable, paddles. Lead Selection: Displayed on monitor, paddles, I.II, III, AVR, AVL, AVF, V. ECG Size; 0.25, 0.5, 1, 1.5, 2, 4 cm/mV display on monitor. Heart Rate: 20-300BPM. Heart Rate Alarm: On/Off displayed on monitor, user-selectable. Smart Alarms: Beeper/voice prompts indicate shockable rhythm.
Battery Type: Rechargeable, Ni-MH battery, 12V. Operating Time: For a new, fully charged battery: 100 defibrillator discharges, or 3 hours minimum of continuous ECG Monitoring, Additional parameters will effect operating time with different functions.
SpO2 Module Measurement Range: 30~100%, +2% or -2% between 8-%~90%, other +5% or -5% Alarm Range: User set high limit and low limit. Alarm Accuracy: less than 12 sec.
Recorder Paper:50mm thermal. Speed: 12.5mm/sec, 25mm/sec, 50mm/sec. User-selectable 6-second delay. Printing-out Modes: Manual or automatic, user-configurable. On/Off Control: Front panel and paddle. Automatic Function: 9-seconds recording intiated by alarm activation or defibrillator charger or de Fibrillator discharge.
AED Mode AED Function: Auto analyze and charge x3 with programmable auto energy level selection, screen prompts, And voice prompts. Shockable Rhythms: Ventricular fibrillation with amplitude>=140ms. Charge Control: Control on device front panel, press key on paddle. Prompts: Voice and visual prompts
Manual Mode Energy Selection: Selectable at 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules. Synchronized Mode: Synchronizes defibrillator pulse to patient's R-wave. "SYNC" message displayed on monitor.
Complaint
