Complaint
Storage Rack Roll Forming Machine, Upright Shelf Roll Forming Machine is one brand equipments used for making rack for supporting supermarket shelf, Storage Rack, Ware House Rack and others.The Upright Shelf Roll Forming Machine can be called as storage rack roll formign machine, it adopts three pieces cutting blades for ensure the shelf rack product is beautiful.
This Storage Rack Roll Forming Machine adopts servo controlled material feeding technology for complex punching to guarantee precision.Except this, we also manufacture solar rack roll formingMachine,Pallet Rack Roll Forming Machine,Unistrut Forming Machine.
What is Metal storage rack / upright pillar working system?
The upright shelf system nomrally uncludes by the column, steel plate composition. Column with roll forming process, with the oblique rod, horizontal rod connected to form a column. According to the needs of the side beam with a layer of laminates or beams used, the board can be adjusted for every 50 mm pitch up and down any height, the shelf for the modular structure, high stability, easy installation and disassembly. Unit shelf each load between 200kg-800kg, the total load is generally not more than 5000kg. Unit shelf span is usually not more than 2.6m, the depth of not more than 1.2m, the height is generally within 5m. Applicable to carrying small and medium goods. Widely used in shopping malls, supermarkets, corporate warehouses and institutions and other industries.
Working process:
Decoiler--feeding & Leveling--punching--roll forming--cutting--product table
Technical parameters for the whole production line:
| 1.Hydraulic decoiler | 1) Capacity:3T 2) Coil inner diameter:350-450mm 3) Coil width:300mm 4) Motor power:3 kw 5) Hydraulic power:3 kw |
| 2.Punching machine | 1) Power: 80 tons mechanical press power with Pneumatic brake 3) Power:5.5 KW |
| 3.Roll forming machine | 1) Machine structure:cast iron roller fixer 2) Main power:11KW *2 sets 3) Forming stations:16 stations 4) Way of drive:by chain 5) Diameter of shaft:70mm 6) Max rolling speed: 10-20m/min 7) Thickness: 0.8-1.5mm galvanized steel or carbon steel 8) Material width:100mm~300mm 9) Material of roller:CR12 with quenched treatment 10) Material of blade mould:Cr12, quenched 58-62 11) Way of cutting:hydraulic cutting 12) Length cutting tolerance:+/-1.0mm 13) Electrical requirement:380V,50Hz,3P |
| 4.Control system | 1) Control system:PLC 2) PLC brand:Delta 3) Screen:Touch screen 4) Screen brand:Touch screen |
| 5.Hydraulic system: | 1) Hydraulic power:5.5kw 2) Cooling system:fan cooling |
| 6.Product table | 1)Length:3m 2)Manual or automatic |
