800kw CHP Biogas Natural Gas Generator for STP

Min.Order: 1

Product origin: Weifang, Shandong, China

Infringement complaint:

Complaint

US$ 23500 ~ 390625

Description

100~800kW CHP Biogas Generator for Biogas Plant

Biogas is primarily methane (CH4) and carbon dioxide (CO2) and may have small amounts of hydrogen sulphide (H2S), moisture and siloxanes. The gases methane, hydrogen, and carbon monoxide (CO) can be combusted or oxidized with oxygen. This energy release allows biogas to be used as a fuel; it can be used for any heating purpose, such as cooking. It can also be used in a gas engine to convert the energy in the gas into electricity and heat.

Typical composition of biogas
Compound	Formula	%
Methane	CH4	50-75
Carbon dioxide	CO2	25-50
Nitrogen	N2	0-10
Hydrogen	H2	0-1
Hydrogen sulfide	H2S	0.1 -0.5
Oxygen	O2	0-0.5

Biogas generator is a common device in the utilization of biogas, as it has the characteristics of gen efficiency, energy saving, safety and environmental protection, widely distributed energy at low price.

Requirements & Remark
Before 1m from gas intake pressure regulator, the requirements are as follows:
Gas temperature ≤40 ºC
Gas pressure 2.5~10 kpa
Pressure change rate ≤ 1k Pa/min
Methane content ≥ 50%
Moisture content ≤ 40 g/Nm3, no free water
Impurity size ≤ 5μm, impurity content≤30mg/Nm3
Sulfur content ≤ 200mg/Nm³
NH3 content ≤ 20mg/Nm³

Operation condition:
Temperature: -20 ºC~+40 ºC
Sea level: < 1000 m
Relative humidity: < 90 %

Technical Parameters of 800kW Biogas Genset

800kW Biogas Generator Set Specifications
Gas Generator	Rated Power	800KW
	Rated Voltage	400V
	Rated Frequency	50/ 60Hz
	Rated Speed	600 rpm
	Dimension (LXWXH)	5800mmX1600mmX3100mm
	Weight(kg)	22000
Gas Engine	Engine Type	In-line, Four Stroke, Electronic Ignition,Trubocharged
	Rated Speed	600 rpm
	Cylinder No.	6 in line
	Bore	300mm
	Start Method	Compressed air
	Crankshaft Rotation Direction	Clockwise (From Flywheel)
	Cooling Method	Open Water Cooling
	Aspiration Type	Trubocharged
	Gas Mixer Formation	Pre-Mix
	Gas Intake Pressure	≥2.5kPa
	Gas Intake Temprature	≤40ºC
	Lubricating oil Consumption (g/Kw·h)	≤0.8
	Max -exhaust Temprature	650ºC
Brushless Alternator	Alternator Model	800KW
	Rated Voltage	400V
	Rated Speed	600 rpm
	Phase NO.	Three phase
	Power Factor	0.8 (LAG)
	Excitation Type	Brushless
	Insulation Class	H
	Protection Class	IP23

Management System Certification: ISO9001:2008, ISO14001:2004, OHSAS18001:2007

Contact: Emma Luan

Phone: +86 176 6023 9752
Manufacturer & Supplier for Biogas Plant, Desulfurization System, Organic Waste Treatment Equipment etc.

Forward

Related products