Categories

Rigid PU Foam for Pipe Insulation Foam
Rigid PU Foam for Pipe Insulation Foam
Rigid PU Foam for Pipe Insulation Foam
Rigid PU Foam for Pipe Insulation Foam
Rigid PU Foam for Pipe Insulation Foam
Rigid PU Foam for Pipe Insulation Foam

Rigid PU Foam for Pipe Insulation Foam

Min.Order: 200
Product origin: Yantai, Shandong, China
Infringement complaint: complaintComplaint
US$ 1800 ~ 1900

Description
BLEND POLYOL SDB10D
RIGID PU FOAM FOR PIPE INJECTION INSULATION
DESCRIPTION
SDB10D is a kind of blend polyol used for pipe insulation system for city heating or cooling.
When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by
using PU injection foam equipment .The foam formed has the characteristics as following:
n The thermal conductivity is low, which can meets the requirements of city heating and
energy saving.
n Service life of the foam is very long, over 30 years.
n High temperature resistance and good dimensional stability of the foam, the highest
temperature range is 140 ºC.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test Method Metric Value
Core Density GB/T 6343-2009 kg/m≥60
 
 Radial Compressive
Strength		 GB/T 8813-2008 MPa ≥0.3 
 Initial Thermal
Conductivity(50°C)		 GB/T 10294-2008 W/(m·K) ≤0.033
        
Close Cell Content GB/T 10799-2008 % ≥88
Water Absorption GB/T 8810-2005 % ≤10
Air bubbles GB/T 29047 mm 1/3Insulation thickness.
Average cell size. GB/T 29047 mm ≤0.5
Importance: The above mentioned are typical test values, and the specific data may vary slightly
due to environmental conditions.For our products, the data are not legally binding.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:

Related products
Pipe Injection Insulation Blend Polyol Rigid PU Foam
Pipe Injection Insulation Blend Polyol Rigid PU Foam
US$ 1800 ~ 2500
Blend Polyol Sdb10f_1 Rigid PU Foam for Pipe Insulation
Blend Polyol Sdb10f_1 Rigid PU Foam for Pipe Insulation
US$ 1500 ~ 1800
Low Odp Blend Polyol Rigid PU Foam for Pipe Injection Insulation
Low Odp Blend Polyol Rigid PU Foam for Pipe Injection Insulation
US$ 1800 ~ 2500
6.3 Pipe in Pipe Process Rigid PU Polyurethane Foam System for Pipe Insulation
6.3 Pipe in Pipe Process Rigid PU Polyurethane Foam System for Pipe Insulation
US$ 1.3 ~ 1.9
2.6 High Volume Output Rigid PU Polyurethane Polyether Polyol Mixture PU Foam Insulation for Pre-Insulated Pipe
2.6 High Volume Output Rigid PU Polyurethane Polyether Polyol Mixture PU Foam Insulation for Pre-Insulated Pipe
US$ 1.3 ~ 1.9
8.3 Water Blown Rigid PU Polyurethane Foam System for Pipe Shell Insulation
8.3 Water Blown Rigid PU Polyurethane Foam System for Pipe Shell Insulation
US$ 1.3 ~ 1.9
7.3 Handwork/Manual Porduction Rigid PU Polyurethane Foam System for Pipe Shell Insulation
7.3 Handwork/Manual Porduction Rigid PU Polyurethane Foam System for Pipe Shell Insulation
US$ 1.3 ~ 1.9
4.6 High Creep Resistance Rigid PU Polyurethane Polyether Polyol Mixture Insulation Foam for Insulated Pipe and Shell
4.6 High Creep Resistance Rigid PU Polyurethane Polyether Polyol Mixture Insulation Foam for Insulated Pipe and Shell
US$ 1.3 ~ 1.9
Customers Also viewed
Rigid PU Polyurethane Polyether Polyol Mixture PU Foam Insulation for Filter
Rigid PU Polyurethane Polyether Polyol Mixture PU Foam Insulation for Filter
US$ 1.5 ~ 2.5
PU Insulation Sda13e Spray Rigid PU Foam for Cold Storage
PU Insulation Sda13e Spray Rigid PU Foam for Cold Storage
US$ 1800 ~ 1900
Water Based Foaming Agent Rigid PU Polyurethane Foam for Wall Insulation
Water Based Foaming Agent Rigid PU Polyurethane Foam for Wall Insulation
US$ 1200 ~ 1350
Rigid Polyurethane Foam Polymeric Mdi Isocyanate for PU Insulation
Rigid Polyurethane Foam Polymeric Mdi Isocyanate for PU Insulation
US$ 2 ~ 3
Quick Demould Rigid Isocyanate Polyol PU Foam Chemical for Refrigerator Insulation
Quick Demould Rigid Isocyanate Polyol PU Foam Chemical for Refrigerator Insulation
US$ 1.4 ~ 2
Product Tag:
Related categories:
Scroll to Top