Complaint
| Raw Material | PPGI,PPGL |
| Material Thickness:24/26 Gauge (0.4-0.6 Mm) | |
| Machine Frame | 350mm H Beam Structure, With 18mm Welded Steel Middle Support Plate. |
| Material Of Rollers | High grade 45# forged steel,Chromed treatment |
| Chromed Treatment (Chrome Thickness:0.05 Mm), Make The Rollers Surface More Smoothly, Improve The Hardness And Prevent Abrasion,Anti Corrosion Increase Of Service Life | |
| Diameter Of Shafts | Φ80mm Solid |
| Material Of Shafts | High Grade 45#,With Heat Treatment |
| Forming Speed | 15 M/Min |
| Voltage | 380v/50hz/3p (As Requested) |
| Transmission Way | By 1 Inch Chain (Double Chains) |
| Cutting Blade Material | Gcr12 quenched treatment |
| Cutting Type | hydraulic post cutting |
| Driving Method | By pillar type Cylinder |
4.Feeding Device
1. There are 4 rollers (three supports and one pressure) at the feeding device, which can be rotated to reduce the friction of the feeding and avoid scratches on the surface of the material.
2. There are three rows of rubber rollers at the feeding device to avoid scratches between the material and the connecting table.
3. The steel plates on both sides of the feeding device are cut by wire, and they are integrally formed to ensure the strength. The steel plate has a hollowing effect: the weight can be reduced while maintaining the same strength.
4. There are chain links in the lateral orientation device to avoid scratches on the plate, and there are nylon plates to avoid scratches on the material.
5. With a hand wheel to adjust the feeding width, making the feeding more accurate.
6. With broach, it is convenient to cut material
5.main frame:
1. Large material: usually 350# or 400# h-beams are welded. Compared with other companies' frames, our company's frame is more stable and reliable. According to different requirements, sometimes we choose 500# h-beams to make large frames to improve the strength of the frame and prevent breakage during delivery.
2. The material we use is thicker than other companies' materials
3. Our frame welding is stronger
4. There are horizontal braces and diagonal braces on the large frame to prevent the large frame from being twisted during the hoisting process, to ensure that the frame is firm and stable, and to avoid damage during transportation. And there are hoisting holes or lifting ears on the big frame, which can ensure the level of everyone, which is convenient for hoisting and moving.
6.Roll Forming And Transmission Device
1.rollers thick chromed good hardness for long service time.
2. Each roller has number and with keynotes, it can fix on the shaft stablely(Under the connection of the key, the shaft drives the rollers to rotate, preventing the phenomenon that the shaft moving roller does not move.)
3.gear and double chain,stableRoll Forming And Transmission Device
7.Hydraulic Cutting Device
Blade material: Cr12,with quenched treatment
Motor power: 4 kw
Cutting tolerance: +/-1 mm
Cooling system: With fan cooling
Cutting type: Hydraulic cutting
Feature: Low noise and high performance
We use four pillars cutting system structure, it can make sure the cutting stable
8.Control system
Control system: PLC
PLC brand: Delta from Taiwan
Frequency converter brand: Delta from Taiwan
5 Encoder: Omron
Function: Automatic control the length,quantity and batch
9.Hydraulic station
1.Hydraulic station motor:5.5KW
2.Hydraulic oil:46# hydraulic oil
3.Main components:Include a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. And one of electromagnetism valve
