Power supply optional 380V/50HZ/3PH;230V/60HZ/3PH;460V/60HZ/3PH
AIR COOLED MODULAR SCROLL CHILLER FEATURES STRUCTURE The master module can work independently or together with up to 11 slave modules, cooling capacity from 30 to 136kW. HERMETIC COMPRESSOR 3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers. AXIAL FAN External rotor type axial fans, equipped with three phase direct drive motors, large diameter fan with low speed, low noise 8 poles, protection level IP55,F class provided with a protective outlet grille. EVAPORATOR Evaporator built with high efficiency plate type or shell and tube heat exchanger, factory insulated with flexible close cell material. CONDENSER Condenser built with seamless internal screw thread copper tubes mechanically expanded into blue wave hydrophilic aluminum fins. REFRIGERANT CIRCUIT Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve. HYDRAULIC CIRCUIT Hydraulic circuit built with galvanized pipe, complete with water discharge connection for heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units. ELECTRIC PANEL Electric panel consist of: Compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit) Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.