Highly Accelerated Temperature and Humidity Stress Test (HAST) Chamber

Min.Order: 1

Product origin: Dongguan, Guangdong, China

Infringement complaint:

Complaint

US$ 5000 ~ 30000

Description

Highly Accelerated Temperature and Humidity Stress Test (HAST) Chamber

The highly accelerated temperature and humidity stress test (HAST) is a highly accelerated method of electronic component reliability testing using temperature and humidity as the environmental parameters.

HAST is also known as the pressure cooker test (PCT) or unsaturated pressure cooker test (USPCT).

Its purpose is to evaluate a test sample's humidity resistance by increasing the water vapor pressure in a test chamber to an

extremely high level above the partial water vapor pressure inside the test sample. This process temporally accelerates the infiltration of moisture into the sample.

It is widely used in semiconductors, IC packing, plastic sealed parts and so on.

GB/T2423.40,IEC60068-2-66,JESD22-A102-D,JESD22-A110-D,JESD22-A118-A

Model		KM-HAST Series
		KM-HAST-35	KM-HAST-55
Interior size	Φ(mm)	350	550
	D(mm)	450	650
Exterior size	W(mm)	730	1150
	H(mm)	1630	1550
	D(mm)	1100	1400
Temp. range		+105ºC~+135ºC
Humidity range		HUM Unsaturated test mode:65%~100%R H STD Saturated test mode: 100%R H
Pressure range		Gauge pressure:0.2~200kPa *Absolute pressure: 100 ~ 300kPa
Temp. fluctuation		±0.5ºC
Temp. uniformity		<=±3.0ºC
Temp. deviation		<=±3.0ºC
Humidity fluctuation		±2.0%R H
Humidity deviation		±5.0%R H
Pressure deviation		<=±2 kPa
Heating up rate		±25ºC~+135ºC within 45 min (average in whole process) ( no-load,no heating)
Pressurization time		Normal Pressure ~200kPa within 20 min
Noise		<=68dB 1 meter distance from the door
Chamber Structure		Interior material:Stainless steel plate(SUS 316)
		Exterior material:Baked painting steel or stainless steel
		Insulation material:Rigid polyurethane Foam + glass fiber wool
Controller		Panel:KOMEG 7 inch touch screen controller. KM-5160 version
Environment Condition		1.Ambient Temperature: 5ºC-35ºC; 2.Humidity: No higher than 85%R.H 3.Air pressure:80kPa~106kPa 4.Flat and no vibration floor;
Safety device		NFB(No fuse breaker), over pressure, over heat and over current protectors for compressor, over temperature protectors, over load protector of fan, dry heat protector,short of water protector
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available

Features
1.HAST Test Chambers Automatic adding water function, and automatic filling water upon the water short storage while testing.

2.Automatic operation to test process finished, easy to use.

3.Temperature control: LED digital temperature controller can make accurate testing of temperature setting, control and display.

4. LED digital timer, when the inner box's temperature reached the setting value, then start to time to ensure the test complete.

5.Accurate pressure: temperature chart always shows the inner box's pressure and relative humidity.

6.Water device is automatically discharge not saturated steam in order to achieve the best steam quality.

7.A integrated silica gel door gasket, air tightness is very good, and long operation life.

8.The inner box is mirror-polished , graceful and non-pollution

Our Process Flow:

Pre-sale Service:

Provide test solution
Send specification and quotation

In-sale Service:

Design
Production
Calibration
Installation
Training
Preventative maintenance

After-sale Service:

24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair

Q:Are your company a trading one or a factory?

A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.

Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.

Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.

Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.

Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our
production lead time depends on specific items and item quantities.

Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.

Q:What about the product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.

Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.

Forward

Related products