MECHANICAL DATA
•Case: Transfer molded plastic
•Epoxy: UL94V-0 rate flame retardant.
•Polarity: Color band denotes cathode end.
•Lead: Plated axial lead, solderable per MIL-STD-202E
Method 208C
•Mounting position: Any
•Weight:0.012 ounce, 0.33grames
MAXIMUM RATINGES AND ELECTRICAL CHARACTER
•Ratings at 25°C ambient temperature unless otherwise specified
•Single phase, half wave, 60HZ, resistive or inductive load.
•For capacitive load derate current by 20%
| SYMBOLS | 1N4001 | 1N4002 | 1N4003 | 1N4004 | 1N4005 | 1N4006 | 1N4007 | UNIT | |
Maximum Repetitive Peak Reverse Voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts | |
Maximum RMS Voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts | |
Maximum DC Blocking Voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts | |
Maximum Average Forward Rectified Current, 0.375″(9.5mm) lead length at TA=75°C | I(AV) |
1.0 | Amps | |||||||
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load(JEDEC method) | IFSM |
30 | Amps | |||||||
Maximum Instantaneous Forward Voltage at 1.0A | VF | 1.1 | Volts | |||||||
Maximum DC Reverse Current at rated DC blocking voltage | TA=25°C
| IR | 5.0 | uA | ||||||
TA=100°C | 50 | uA | ||||||||
Maximum Full Load Reverse Current, full cycle average 0.375″(9.5mm) lead length at TL=75°C | IR(AV) | 30 | uA | |||||||
Typical Junction Capacitance(Note 1) | CJ | 15 | pF | |||||||
Typical Thermal Resistance(Note 2) | RJA | 50 | °C/W | |||||||
Operating and Storage Temperature Range | TJ | (-65 to +175) | °C | |||||||
Storage Temperature Range | TSTG | (-65 to +175) | °C |