110V 30A Battery Discharge Tester Battery Discharge Unit Battery Discharger DC Load Bank

Min.Order: 1
Product origin: Wuhan, Hubei, China
Infringement complaint: complaintComplaint
US$ 1000 ~ 6000

Description
HDGC3980 Battery Discharge Tester for 110V Battery Group


General information

HDGC3980 Battery Discharge Tester can be used as the discharge load in the battery off-line state to realize the constant discharge at the set value by regulating continuously the discharge current. When discharging, the tester will automatically stop discharging when the voltage on the battery group terminal or the cell falls to the set lower limit value, or when the set discharging time is out, or when it reaches the set discharging capacity. Battery Discharge Tester can records all valuable and continuous real-time data during the discharge process.

Features

1.PTC ceramic resistor is adopted to avoid the red heat phenomenon for a safer discharge process.

2.Cell monitoring module is performed the voltage commission by remote radio wireless communication mode, it can set up to four unique frequency brands.

3.Wireless acquisition box can monitor each cell for monitoring the whole process of battery series. There are three data monitoring methods.

4.Each tester can monitor 25 cell monitoring  mode , every cell monitoring mode can connect 12 battery ,monitoring in total of 300 battery. 

5.Cell voltage value can be displayed by sliding table and sliding bar chart and searched by two data .

6.Connected with USB interface,the data of the discharge process can be record to U disk and transformed to PC by U disk . PC data manage software can analyze the discharge process and generate the corresponding data for more convenient storage .

7.Intelligent SCM ARM control, 7inch 1024*600 LCD screen , capacitive touch operation, built in English menu, simple and clear operation menu.

8.Automatic self-protection stop function,over-heat protection,over voltage protection,over current protection and reverse connection protection,alarm prompt is displayed on the screen once it appears any issue, air circuit breaker automatically cut off.

9.It can perform on-line compensated charge/discharge, and can also carry on discharge test for on-line working storage battery by connection  external current clamp sensor,which is convenient for measurement work. 

10. RS485 remote control charge , discharge and activation functions .

11. It has the function of charge, discharge and activation with muti machine parallel mode by only operating in the display screen of the parallel  instrument with parameters as the master. 


Technical Parameter
 
Suitable BatteryDC 110V
Model No.HDGC3980
Discharge current0~30A
Discharge VoltageDC 88-132V
Working modeSingle main unit, parallel master mode, parallel slave mode, and remote controlled mode
Protection performanceOver-voltage protection, under-voltage stop, over-current protection, reverse wiring protection, 65ºC over-temperature protection, LCD prompt and buzzer alarm
Cell voltage collection (optional)Multi-band RF wireless module for communication distance of more than 100m, compatible with 2V/4V/6V/12V cell monitor module , 1-25 groups of RF wireless monitoring modules up to 300 batteries, and single wireless monitoring module for monitoring 12 cells
Control precisionDischarge current≤±1%; group voltage≤±0.1%; cell voltage≤±0.5%
PC communicationRS485 interface, USB interface
Work Environment
Heat radiationForced air cooling
TemperatureWorking rage: -5-50ºC  Storage temperature: -40-70ºC
HumidityRelative humidity 0-90% (40±2ºC)
ElevationBelow 4,000m
Noise<75dB
Working Power Supply
VoltagePower supply: single-phase AC220V (-20%-+30%), frequency: 45-65Hz;
Electric strength testInput-shell: 2200Vdc 1min
Input-output: 2200Vdc 1min
Output-shell: 700Vdc 1min
SafetyCompliance with EN610950

Product Tag:
Related categories:
Scroll to Top