Complaint
| Technical parameters | RL8-01 | RL8-02 |
| Function | 2 level contorl mode | 2 or 1 level contorl mode |
| Supply terminals | A1-A2 | |
| Voltage range | AC/DC 12-240V(50-60HZ) | |
| Input | max.2VA | |
| Supply voltage tolerance | -15%;+10% | |
| Sensitivity (input resistance) | adjustable in range 5 kΩ-100 kΩ | |
| Voltage in electrodes | max.AC 5V | |
| Current in probe | AC<0.1 mA | |
| Time response | max.400ms | |
| Max.capacity length | 800m (sensitivity 25kΩ), 200m(sensitivity 100 kΩ) | |
| Max.capacity of probe cable | 400 nF (sensitivity 25kΩ),100 nF (sensitivity 100 kΩ) | |
| Time delay (t) | adjustable, 0.5-10s | |
| Time delay after power on | 1.5s | |
| Accuracy in setting (mechanical) | ±5% | |
| Temperature coecient | 0.05%/ºC,at=20ºC(0.05%ºF,at=68ºF) | |
| Output | 1×SPDT | |
| Current rating | 10A/AC1 | |
| Switching voltage | 250VAC/24VDC | |
| Min.breaking capacity DC | 500mW | |
| Output indication | red LED | |
| Mechanical life | 1×107 | |
| Electrical life(AC1) | 1×106 | |
| Reset time | max.200ms | |
| Operating temperrature | -20ºC to +55ºC(-4ºF to 131ºF) | |
| Storage temperature | -35ºC to +75ºC(-22ºF to 158ºF) | |
| Mounting/DIN rail | Din rail EN/IEC 60715 | |
| Protecting degree | IP40 for front panel /IP20 terminals | |
| Operating position | any | |
| Overvoltage category | III. | |
| Pollution degree | 2 | |
| Max.cable size(mm²) | soild wire max.1×2.5 or 2×1.5/with sleeve max.1×2.5(AWG 12) | |
| Dimensions | 90×18×64mm | |
| Weight | 61g | 81g |
| Standards | IEC/EN 62055-1,IEC/EN61010-1 | |
