High Voltage Cable Accessory 110kv Soft Dry Type Termination

Min.Order: 3

Product origin: Wuxi, Jiangsu, China

Infringement complaint:

Complaint

US$ 2000

Description

Introduction on Cable Accessories for 48/66~290/500kV
48/66kV~290/500kV high voltage cable accessories can be classified as porcelain bushing outdoor termination, composite bushing outdoor termination, full-prefabricated soft dry type outdoor termination, GIS termination, full-prefabricated silicone rubber straight through /insulating joint, assembled joint applied to any cross section, single-phase type and three-phase type for fully dry insulating branch joint, grounding box, and grounding protection box, interconnected box and sheath protector, etc.

4E-YJZWRG Soft Dry Type Outdoor Termination
The company produces 4E-YJZWRG two main soft dry type outdoor termination 4E-YJZWRG3 and 4E-YJZWRG4, which are widely used for outdoor high-voltage overhead lines and cable connections with anti-fouling grade of grade III, and grade IV. They are composed of termination, main body of fully prefabricated soft silicone rubber(stress cone included), and tail tube. The main body of prefabricated soft silicone rubber is using imported liquid silicone rubber injection rubber molding soft dry structure, which has long-term stability of lasting hold power and electric field uniform ability. The overall shape of casting is conical structure of the flow line with good anti-fouling flash, weather resistance, anti-leakage marks, anti-erosion and water repellent ability. There's no need to fill insulating gas or oil, effectively ensure the long-term safe operation of the product. Our product is using multiple sealing structure which can effectively prevent the leakage of water immersion and insulating oil. All of the seals are using imported NBR or silicon rubber material. All of the fastener raw-material are stainless steel with good waterproof seal performance.
However, due to the lack of sufficient rigidity, should not be installed in wind areas.

1. Outlet rod 2. Grading shield 3. Core insulation 4. Prefabricated main body

5. Stress cone 6. Tail pipe 7. Cable

Size mm	64/110kV	80/138kV
L	1460	1680
A	2000	2320

Soft dry type outdoor termination has the following superior performance:

More lighter in weight, the whole weight of main body of fully prefabricated soft silicone rubber is less than 30kg.
Easy installation, due to the lighter in weight, it can be installed on the ground and then lifted into place. There's no need to build aerial installation platform, greatly reducing the labor.
Products are particularly suitable for indoor installation, the best choice for indoor termination.

1-500kV Cable Accessories Electrical Performance Parameter
1~500kV cable accessories common parameters and factory test specification
Voltage levels provided by our company include 1kV, 10kV, 35kV, 48/66kV, 56/78kV, 64/110kV, 76/132kV, 127/220kV, and 290/500kV in accordance with IEC60502, IEC60840, IEC62067, IEC60859, IEC62271-209, GB/T11017, GB/Z18890, GB/T22078, GB/T12706, GB311, GB772, BS EN 50181, IEEE386, DL508, DL509, JB/T8144 standards, and pass through rigorous factory test, type test, and pre-identification test (220kV and above).
Test name and code

Test classifications and code:

No.	Test Name	Code
1	Routine test	R
2	Sampling test	S
3	Type test	T
4	Pre-identification test	P
5	Additional test	A

Routine test for each of the stress cone, GIS epoxy bushing, and straight through joint prefabricate main body of 66kV and above cable accessories:

Item	66kV	110kV	220kV
Partial discharge	72kV, partial discharge not more than previously carried out items	96kV, partial discharge not more than previously carried out items	190kV, partial discharge not more than previously carried out items
Power frequency withstand voltage	120kV/30min (joint main body 60min, no flashover no breakdown)	160kV/30min (joint main body 60min, no flashover no breakdown)	318kV/30min (joint main body 60min, no flashover no breakdown)
Seal test	0.25±0.01MPa/1h for sealing fittings, porcelain bushing, composite bushing, no leakage
Seal test	0.6~0.7MPa/1h for epoxy bushing, no leakage
Appearance test	No damage, no cracking and other defects that affect the quality and appearance