Complaint
| Product Details | |
| Product name | SA 815 Butt Weld End Cap Super Duplex Stainless Steel Fittings F53 / S32750 |
| Brand name | ABOOM |
| Standard | ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459 ANSI B16.5, ANSI B16.47 |
| Material | 300 series: 301,303/Cu,304/L/H,304Cu,305,309/S,310/S,316/L/H/Ti,321/H,347/H,330, 400 series: 409/L,410,416/F,420/F,430,431,440C,441,444,446, 600 series: 13-8ph,15-5ph,17-4ph,17-7ph(630,631),660A/B/C/D, Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760,2304,LDX2101.LDX2404,LDX4404,904L Others: 254SMo,253Ma,F15,Invar36,1J22,N4,N6 etc Alloy : Alloy 20,Alloy 28,Alloy 31; Hastelloy: Hastelloy B / B-2,Hastelloy B-3,Hatelloy C22,Hastelloy C-4,Hastelloy S, Hastelloy C276,Hastelloy C-2000,Hastelloy G-35,Hastelloy G-30,Hastelloy X, Hastelloy N; Haynes: Haynes 230,Haynes 556,Haynes 188; Inconel: Inconel 600,Inconel 601,Inconel 602CA,Inconel 617,Inconel 625,Inconel 718,Inconel X-750,Carpenter 20; Incoloy: Incoloy 800 / 800H / 800HT,Incoloy 825,Incoloy 925,Incoloy 926 GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 Monel: Monel 400,Monel K500 Nitronic: Nitronic 40,Nitronic 50,Nitronic 60; Nimonic: Nimonic 75,Nimonic 80A,Nimonic 90 ; |
| Outer Diameter | 1/2"-80", DN6-DN2400 |
| Pressure | CLASS 150LB -CLASS 3000LB |
| Application | Pipeline and valves connection |
| Technology | Forged flange |
National standards:
| ASTM / ASME: A240-UNS S32750 |
| EURONORM: 1.4410-X2 Cr Ni MoN 25.7.4 |
| AFNOR: Z3 CN 25.06 Az |
| DIN / EN 1.4410, ASME SA-240 |
SA 815 Cap Super Duplex Pipe Fittings F53 / S32750 Size:
| Outer diameter: 1/2 "-20" (DN15-DN500) |
| Wall thickness: Sch5S-Sch80S |
Production standards: SA 815, GB / T13401, SH3408, SH3409; ASME / ANSI B16.9, B16.28,
ASTM A403, MSS SP-43; DIN 2605, DIN2609, DIN2615, DIN2616;
JIS B2311, JIS B2312, JIS B2313
General attributes:
S32750 Super Duplex stainless steel pipe has strong strength and corrosion resistance, and is mainly used in chemical processing, petrochemical and subsea equipment. It has strong resistance to chloride corrosion, higher thermal conductivity and lower coefficient of thermal expansion. Higher chromium, molybdenum and nitrogen content it has a high resistance to pitting, crevice corrosion and general corrosion.
Its impact strength is also very high. The S32750 alloy is not suitable for use at temperatures higher than 570 ° C. If it is exposed to such an environment for a long time, its toughness will decrease.
Mechanical properties Tensile strength: σb≥730Mpa Elongation: δ≥15%
Typical working conditions :30% dilute sulfuric acid, below 60 ºC, annual corrosion rate <0.1mm
2.
| Chemical Composition(%) | |||||||||||
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu | |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
| 202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | ||
| 301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | |||
| 302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | |||
| 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | |||
| 304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | |||
| 310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | |||
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | |||
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | |||
| 321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | |||
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | - | ||||
| 2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | |||
| 2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | |||
| 904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | 1.0~2.0 | ||
| INCONEL 028 | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | ≤1.4 | ||
| MONEL 400 | ≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | ≤34.0 | ||
| INCONEL 800 | ≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 | Ti≤0.6 Al≤0.6 |
| Packaging Detail | In bundles with waterproof material, in wooden cases |
| Delivery Time | 20 days |
