Electrostatic Metallic Powder Coating Paint Super Durable High Gloss Retention | ||
Mechanical property | ||
Testing items | Standards and methods | Inspecting index |
Impact strength | GB/T1732-1993, AS3715 2.8 | >50kg/cm |
Bending resistance | GB/T1185-88, AS1580 402.1, ISO9227 | Pass 2-5 millimeters |
Adhesion CHECKED TEST | GB/T9286-88,2mm Cross cut, ISO2409 | Pass100/100, passes 0 levels |
Cupdrawing:Erichsen, ISO1520 | Erichsen, ISO1520 | Pass 3-7 millimeters |
Pencil hardness | GB/T6739-86, Mitsubishi | Pass H-2H |
Chemical resistance and weather resistance | ||
Salt spray test | GB/T1771-91,500 hours | The cross section of corrosion less than 2MM |
Hot and damp resistance test | GB/T17740-79(89),1000 hours | Without air bubbles, loses the light slightly |
Acid resistance | 10% CH3COOH, 240 hours | Without air bubbles, the surface without damage |
Alkali resistance | 10% NaOH, 240 hours | Without air bubbles, the surface without damage |
Heat resistance | 200degree,1 hour | The color change is lower than E=1.5 |
Solvent resistance | MEK24 hours soaked in solvent-free | Without air bubbles, the surface without damage |
Uvioresistant | QUV-313,500 hours | Gloss higher than 80% lower than the Munsell color change level |
Water tolerance of | 2 hours | No bubble, not falling, losing light |
Performance | Great Weatherability Performance |
Excellent Luster And Color Integrity | |
Excellent Mechanical And Chemical Performance | |
Great Leveling And Gloss | |
Great Anti Heat Property,Suitable For Long-Term Outdoor Exposure Product , Good Outdoor Durability | |
Brife Introduction | Outdoor Powder Coating Is A Kind Of Weather-Resistant Powder Coating Produced Through Strict Process And Inspection Control. The Coating Film Has A 5-20 Year Gloss And Color Integrity Guarantee. It Is Mainly Used In Exterior Products. |
Density | 1.2-1.8 G/Cm3 |
Film | Film Thickness :40u~150um , Best Recommendation Is 40um~80um |
Utilization Rate | Average Coverage : 10~12 Square Meter/KG ,With 60um (100% Use Rate) |
Curing Condition | 160°C/10min;180°C/10min ;180°C/15min;190°C/15min ;200°C/10min; Or Customized According To Requirements |
Method | Corona Electrostatic Spraying ,Electrostatic-Fluidized Bed, Fluidized Beds,Tribo Charging Guns |
Applicaiton | Mainly Used For Outdoor Units Of Air Conditioners, Park Appliances, Lamp Posts, Outdoor Furniture, Lawn Mowers, Agricultural Machinery, Etc. It Has The Function Of Decoration And Outdoor Weather Resistance. |
Transportation | Two Layers Of Polyvinyl Chloride Plastic Bags In Carton Package, 20 /25kg Per Carton. Non-Dangerous Goods Can Be Transported In Various Ways, But Avoild From Direct Sunlight, Moisture And Heat, And Contact With Chemical Substances. |
Safety | Non Toxic Substances, And There Is No Toxic Gas Generated During Baking, But Avoid Inhaling Dust During Use, Operators Should Wear Dust Masks, And Minimize The Long-Term Contact Between Skin And Powder Coatings, Which Adhere To The Skin The Paint On The Surface Can Be Cleaned With Soap. |
Storage And Transport | Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used. |
U-COAT Manufactures, Markets And Distributes Powder Coatings For Vehicles, Agriculture And Construction Machineries , IT Products , Household Appliance , General Industries , A Wide Variety Of Industrial Coating Systems Etc.12 Producing Lines With Annual Capacity Of 36,000 Tons , And 3,000 Tons Of Metal Powder Coatings.Annual Production Capacity Of Polyester Resin Is 70,000 Tons,Including TGIC Curing System ,HAA/Primid Curing System ,Hybrid Epoxy Polyester Resin For Powder Coating. Total Production Value Arrives At 2 Billion.Various Of Types For You To Choose , OEM And ODM Is Supported.We Own A Strong Technical Team To Support If Any Customized Requirements. |