Automatic Door Opener Kit Sliding Gate Operator with Remote Control APP Control

_{JUTAI offers complete Entrance automation by providing barrier gate entrance and sliding gate entrance.
The sliding gate entrance includes a sliding gate motor, safety gate photocells, safety light curtains, remote controls, card reader, and PC software or mobile phone APP control.}

 

1. _{^{Anti-rush design. At the first operation after each power on, the motor runs in slow motion to the limit point throughout the process to avoid rushing out of the limit. When the door reaches the limit point, the motor can only be operated by pressing the button in the opposite direction to prevent the limit from being broken out. (Notice: It has the power-off protection function when in place, and the motor only moves in the opposite direction when repowered).}}
2. _{^{Master-slave mode is available. Two motors with the same control board on each can work synchronously. In this mode, an infrared, ground sense, automatic door close, and other functions are synchronized. Attention: Infrared, ground sense must be connected to the master motor.}}
3. _{^{Motor runtime protection. To prevent the motor from running during the travel failure, the control board will automatically learn the motor running time without manual setting, and 10s will be added automatically as the time margin.}}
4. _{^{Auto-close function. Time can be set from 1s to 250s before the door closes automatically. The default value is 3s.}}
5. _{^{Soft start and slow stop. There're soft start and slow stop features available. The distance and speed of the slow stop feature can be adjusted.}}
6. _{^{Stop & rebound against resistance. Switchable between stop against resistance and rebound against resistance for the closing travel. Stop against resistance for the opening travel.}}
7. _{^{Onboard socket for Bluetooth module. A socket is integrated onboard for the insertion of the standalone Bluetooth module (module not included by default).}}
8. _{^{One button configuration for internet control. Can be directly paired with the internet controllers by pressing one button on the board, no copy procedure is required.}}

JUTAI Special Remote Control
 

Remote Control Paring and Deletion:

<sub>Pairing
Mode A: Lock button disabled
Hold down the STUDY button on the control board for about 1s until a buzz, then hold down any button among UP, DOWN, STOP on the remote control, release it against a buzz, and the pairing procedure is complete. Repeat this step to pair more remotes. Up to 120 remotes can be paired with a single board.

Mode B: Lock button enabled
Hold down the STUDY button on the control board for about 1s until a buzz, then hold down the LOCK button on the remote control, release it against a buzz, and the pairing procedure is complete. Repeat this step to pair more remotes. Up to 120 remotes can be paired with a single board.

P.S. If an unwanted mode is activated, redo the pairing process following the instruction of the wanted mode.


Deletion
Hold down the STUDY button on the control board for about 7s, and release it against 3 continuous buzzes to delete all paired remotes.
P.S.: After entering the pairing state, if no effective RF signal is sensed, the board will exit the pairing state automatically with a buzz and the LED returning to always on.</sub>
 

Sliding gate motor specification