High quality/High cost performance Sand Blasting Abrasive Red Garnet Sand 60mesh and 80mesh for Waterjet Cutting

Min.Order: 1

Product origin: Zhengzhou, Henan, China

Infringement complaint:

Complaint

US$ 200 ~ 300

Description

Garnet sand

Garnet sand is a good abrasive which is used for water filtration and as a wood finisher for furniture pieces. As an abrasive, garnet sand can be divided into two categories: blasting grade and water jet grade. Garnet sand is crushed into finer grains and used for sand blasting. The larger grains after being crushed are used for faster work while smaller grains can be used for finer finishes. Garnet sand is brittle and can fracture easily - which is the reason why different types of sand are produced.

Garnet sand is also known as water jet cutting sand. It is made from calcium-aluminium silicate and is normally used as a replacement for silica sand in sand blasting operations. There are various types of sandblasting media including mineral abrasives like aluminium oxide and coal slag. Garnet sand is the most popular sandblasting type, but since these types create a significant amount of dust, they are banned in many countries like Germany and Portugal to use as a blasting grit.

Physical properties		Chemical composition
Specific Gravity	4.0-4.1 g/cm	Silica Si 02	34-38%
Bulk Density	2.3-2.4g/cm	Iron Fe2 O3+FeO	25-33%
Hardness	7 .5-8.0	Alumina AL2 O3	17-22%
Chloride	<25 ppm	Magnesium MgO	4-6%
Acid solubility(HCL)	<1 .0%	Sodium Oxide Cao	1-9%
Conductivity	< 25 ms/m	Manganese MnO	0-1%
Melting point	1300 °C	Sodium Oxide Na2 O	0-1%
Grain shape	Granule	Titanium oxide Ti 02	0-1%

Advantages of Our Garnet

+ Almandine Rock Garnet
+ Great Hardness
+ Sharp Edge
+ Chemical Stability
+ Lower chloride content
+ High Melting Point
+ Low Dust Generation
+ Economical
+ Low conductivity
+ No Radioactive Components

Conventional production size:

Sand blasting/surface treatment:8-14#, 10-20#, 20-40#, 30-60#

Water knife cuts:60#,80#,100#,120#

Water treatment filter material:4-8#, 8-16#, 10-20#

Wear resistant floor sand: 20-40#

Typical Applications of Garnet sand

1) As an abrasive garnet can be broadly divided in two categories, blasting grade and water jet grade. The garnet, as it is mined and collected, is crushed to finer grains; all pieces which are larger than 60 mesh (250 micrometres) are normally used for sand blasting. The pieces between 60 mesh (250 micrometres) and 200 mesh (74 micrometres) are normally used for water jet cutting. The remaining garnet pieces that are finer than 200 mesh (74 micrometres) are used for glass polishing and lapping. Regardless of the application, the larger grain sizes are used for faster work and the smaller ones are used for finer finishes.

2) Garnet sand is a good abrasive, and a common replacement for silica sand in sand blasting. Alluvial garnet grains which are rounder are more suitable for such blasting treatments. Mixed with very high pressure water, garnet is used to cut steel and other materials in water jets. For water jet cutting, garnet extracted from hard rock is suitable since it is more angular in form, therefore more efficient in cutting.

3) Garnet paper is favoured by cabinetmakers for finishing bare wood.

4) Garnet sand is also used for water filtration media

5) Used in non-skid surfaces and heavily as a semi-precious stone

Package Terms:

25kgs/bag,40 bags in a weaven bag
25kgs/bag,40 bags in a pallet
25kgs/ papper bag, then 40 papper bags in a pallet

Founded in 1996, Zhengzhou Xinli Wear-resistant Materials Co. Ltd. Is a professional integrative enterprise specializing in R&D, producing, and selling various wear-resistant materials, such as white corundum powder, alumina powder, green silicon carbide powder, brown corundum powder, etc.

Xinli Wear-resistant Materials has completed inspection equipment and quality control system, and obtained ISO9001:2015 quality management system certification.

+ Our well-equipped lab tests the quality of raw material, during production process and of the final products.
+ Detailed test report of every batch is sent to clients for confirmation before deliver.
+ Sample of every batch is kept in the lab for a period of 2-year time for quality track.
+ Third-party quality check is welcomed at any time you need.

Insist on innovation, standardized and refined production, help every customer use the quality-stable and preferential price products are the goal that keeps Xinli moving forward.

Our Advantage:

1.Competitive Price. Make the products competitive in your market.
2.Quick Response:We promise quick response at the very first moment when we received your request.
3.Superior Customer Service:The company&nbs p;provides after sales service ensuring&n bsp;customer's satisfactions,we believe in L ong term partnership bringing loyalty.
4.We had been on this filed for many years and we have our own research team,the prouduction process could be concrolled strictly.
5.We have developed stable customer base overseas and kept long-term cooperation.

1.How about your MOQ?
The MOQ is 1 tons depends on the kinds of activated carbon.

2.How about the payment?
We can accept 30% deposit. T/T, L/C, Western Union and so on.

3.How about the package?
Net weight: 25kg,500KG Or as the customers' requirement

4. How can I get the sample?
We'd like to supply samples free of charge.

5. How does your factory do regarding quality control?
My company always attaches great importance to quality controlling from the very beginning to the very end.