Film Grade HDPE Granule High Density Polyethylene Resin Raw Material Virgin

Min.Order: 20
Product origin: Shijiazhuang, Hebei, China
Infringement complaint: complaintComplaint
US$ 750 ~ 1100

Description
Product Description

High density polyethylene (HDPE), white powder or granular product. Non-toxic, tasteless, crystallinity of 80% ~ 90%, softening point of 125 ~ 135ºC, use temperature up to 100ºC; The hardness, tensile strength and creep properties are better than those of LDPE. Good wear resistance, electrical insulation, toughness and cold resistance; Good chemical stability, at room temperature, insoluble in any organic solvent, acid, alkali and various salts corrosion; The membrane has low permeability to water vapor and air and low water absorption. Poor aging resistance, environmental stress cracking resistance is not as good as low density polyethylene, especially thermal oxidation will make its performance decline, so the resin must be added to the antioxidant and ultraviolet absorbent to improve the lack of this aspect. High density polyethylene film has low thermal deformation temperature under stress, so attention should be paid to its application.

Detailed Photos

 

Application

Acid and alkali resistance, organic solvent resistance, excellent electrical insulation, low temperature, still can maintain a certain toughness. Surface hardness, tensile strength, rigidity and other mechanical strength are higher than LDPE, close to PP, tougher than PP, but the surface finish is not as good as PP.

Poor mechanical performance, poor air permeability, easy deformation, easy aging, easy to brittle, brittle than PP, easy to stress cracking, low surface hardness, easy to scratch. Difficult to print, printing, need to carry out surface discharge treatment, can not electroplate, surface dull.

Used for extruding packaging film, rope, woven bag, fishing net, water pipe; Injection molding low-grade daily necessities and shells, non-load-bearing components, plastic boxes, turnover boxes; Extrusion blow - molded containers, hollow products, bottles.

 

Product Parameters
ItemUnitTest method
Density0.954g/cm3ASTM D1505
Melt Index(190°C/2.16kg)0.9 g/10 minASTM D1238
Falling Weight Impact Strength50gASTM D1709
Elmendorf Tear Strength10kg/cmASTM D1922
Film Impact Strength
 
160kg.cm/mmASTM D3420
Youngs Modulus600/750MPaASTM D882
Tensile Strength(YIELD)70/60MPaASTM D882
Tensile Strength(break)30/30MPaASTM D882
Elongation(break)650/750MPaASTM D882
Vicat Temperature129 °CASTM D1525
Low temperature brittleness-70°CASTM D746
Melt Temperature180-220°C
 
Packaging & Shipping

 

Company Profile
 
We take "quality products, quality service, competitive price, timely delivery" as the purpose, looking forward to greater cooperation with overseas customers on the basis of mutual benefit. Our company provides a wide range of products to meet your various needs. Our main products: EVA, PET, HDPE, LDPE, LLDPE, ABS, HIPS, EPS, GPPS, PC, etc. Since its inception, the company has always adhered to the "quality first, customer first, reputation first" business policy, wholeheartedly meet the potential needs of our customers. Under the irresistible situation of economic globalization, our company is willing to cooperate sincerely with enterprises around the world to achieve a win-win situation.

 

Certifications
FAQ

1. Are youtrading company or Manufacturer ?
   We are factory.

2.About Sample
 
We provide samples, but you need to pay the sample fee and freight.

3. About Material
   We can customize the material according to customers' requirement.

4. About Quality

   All the products must be tested strictly according to the testing procedure before shipment.

5. About Delivery Period
   Normally delivered in 21 working days after the confirmation of order& payment. And it varies according to the material and
   quantity.

6. About Payment term
   
It's flexible, T/T, L/C at sight,100% in advance,30% in advance, the balance by copy B/L

Product Tag:
Related categories:
Scroll to Top