Premium Silicone Dow Corning Raw Material with Antifungus Sealant

Min.Order: 10,000

Product origin: Tianjin, China

Infringement complaint:

Complaint

US$ 1.1 ~ 2.1

Description

GNS G33 ANTI-FUNGUS SILICONE SEALANT

GNS G33 ANTI-FUNGUS SILICONE SEALANT is acetoxy cure, one part RTV silicone sealant. Can be applied on glass, ceramics vitreous enamels. shelves, counter cabinets, signs and many other building materials.

FEATURES

Easy to use - one part, no mixing required. Can be dispensed with an ordinary caulking gun.
Cures to a strong, flexible seal capable of withstanding movement in and around the joint.
Excellent resistance to weathering, UV light, vibration, moisture, ozone, temperature extremes, airborne pollutants, cleaning detergents and many solvents.
Non-slumping; can be used in vertical and overhead joints.

PACKAGING
Available in:
Standard Size:
280ml recyclable plastic cartridge, 24ctgs/ctn
Special Size:
Contact us for special size.

COLORS
Available for four standard colors: Translucent, White, Black, Aluminum.
Contact us for special colors.

STORAGE AND SHELF LIFE
12 months from manufacture date when store in cool dry locations below 25ºC, keep away from heat source and direct sunlight during storage.

APPLICATION
Apply to clean, dry and grease-free surfaces. Cut the nozzle at 45°angle to the desired shape and size. For better appearance, cover outside of joint areas with masking tape before application. Tool immediately after sealant application and remove masking tape before sealant skins.

PERFORMANCE DATA

Test Parameter	Unit	Result
As Supplied Tested at 23ºC and 50% RH
Specific Gravity	g/ml	0.96±0.02
Flow (sag or slump)	mm	0
Extrusion Rate Skin Time	ml/minute minute	150 5~10
Tack-free Time	hour	≤1.0
Curing time (5mm)	hour	≤12
As Cured-after 21 days at 23ºC and 50% RH
Durometer Hardness, Shore A	Points	22
Movement Capability	%	±25
Tensile/Modulus at 50% Elongation	Mpa	0.24
Tensile/Modulus at 100% Elongation	Mpa	0.28
Ultimate Tensile Strength Ultimate Elongation at Break	Mpa %	0.32 250

Caution
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.

LIMITATIONS

Unsuitable for curtain wall structural applicatio
Do not use for below ground.
Do not use when substrate temperature is above 50ºC or surfaces that are wet, oily, greasy, dusty or dirty.
The surfaces coated with paint are unsuitable for sealant.
Do not clean or treat the sealant with materials, solvents or cleaning agents that may affect or discolor the sealant, particularly during sealant cure.
n.

HEALTH AND ENVIRONMENTAL INFORMATION
To support Customers in their product safety needs, GNS has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.

Forward

Related products