Complaint
| Product Details | |
| Product name | ASTM SB167 Nickel Based 2.4816 Inconel Alloy |
| Brand name | ABOOM |
| Standard | ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459 |
| Material | N08367 Al-6XN 1.4501 Incoloy25-6hn NAS 255NM |
| Surface | Pickling, 400grit polishing, 600grit polishing, mirror finish |
| Certificate | BV, LR, GL, NK, RMRS |
| Packing | In bundles with waterproof material, in wooden cases |
| Shipment | By sea, by air, by express |
2.4816 Inconel 600 Tube Blank For Pipeline Flue Gas Emission Reduction Project Of Super Centrifuge
Material designation:
Inconel 600 nickel based alloy
US grade: N06600 / NS3102
Inconel 600 (N06600) nickel-based alloy process performance and requirements:
1. Inconel600 formability: The alloy has good hot workability. The heating temperature of ingot forging is 1110 ~ 1140 ºC; the final forging temperature is not less than 950 ºC, the slab rolling heating temperature is 1130 ~ 1170 ºC, and the finishing rolling heating temperature is 1090 ~ 1130 ° C. The final solution treatment temperature is 1010 to 1050 ° C.
2. Inconel600 welding performance: alloy welding performance is good, can be connected by various methods such as arc welding, argon arc welding, resistance welding and brazing, large or complex welded structural parts should be annealed at 870 ºC for 1h after welding to eliminate Welding stress.
3. Inconel600 parts heat treatment process: The heat treatment process of parts should be performed according to the corresponding material standard heat treatment system. Annealing of sheet and strip parts should be performed in a protective atmosphere.
Inconel 600 (N06600) nickel-based alloy chemical composition: see Table-1:
Table-1 %
| C≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr≥ | Ni≥ | Mo≥ | Cu≤ |
| 0.15 | 0.50 | 1.00 | 0.040 | 0.015 | 14.0-17.0 | 72.0 | - | 0.50 |
| others | N≤ | Al≤ | Ti≤ | Fe≤ | Co≤ | V≤ | W≤ | Nb+Ta |
| - | 0.35 | 0.50 | 6.0-10.0 | - | - | - | ≤1.00 |
Note: 1 Standard BZ-44-9003B-0 for aerospace materials specifies ω (C) ≤ 0.10%, ω (P) ≤ 0.020%, and ω (Nb) ≤ 1.00%.
specification:
Outer diameter Φ6-762mm; wall thickness: 0.5-50mm, maximum length 18000mm
Special specifications are available upon negotiation.
2.
| Chemical Composition(%) | |||||||||||
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu | |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
| 202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | ||
| 301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | |||
| 302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | |||
| 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | |||
| 304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | |||
| 310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | |||
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | |||
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | |||
| 321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | |||
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | - | ||||
| 2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | |||
| 2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | |||
| 904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | 1.0~2.0 | ||
| INCONEL 028 | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | ≤1.4 | ||
| MONEL 400 | ≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | ≤34.0 | ||
| INCONEL 800 | ≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 | Ti≤0.6 Al≤0.6 |
| Packaging Detail | Each tube is loaded into plastic bag individual, and then several pieces were wrapped in one bundle |
| Delivery Time | 30 days |
