Cvcv-Xen Original Sun Cartridge Valve Hydraulic Solenoid Valve

Min.Order: 1
Product origin: Ningbo, Zhejiang, China
Infringement complaint: complaintComplaint
US$ 25 ~ 65

Description
Original SUN CV series Cartridge Valve Hydraulic Solenoid Valve


This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow from the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) will open the valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the load pressure at port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced to the vent (port 4).

  • Pilot pressure as low as 75 psi (5 bar) higher than the pressure at the vent can prevent the valve from closing.
  • Will accept pressure at port 4 (vent) but can not exceed 5000 psi (350 bar).
  • Pilot-to-open check cartridges are locking valves, not motion control valves. For motion control applications, use counterbalance valves.
  • Four-port pilot-to-open check cartridges and four-port counterbalance cartridges are physically interchangeable (i.e. same cavities, same flow path for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
  • Approximately 1 drop (0,07 cc) of fluid will pass from the pilot area to the vented spring chamber every 4000 cycles.
  • For models with manual load release control option, turn load release clockwise to release load.
  • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
  • Provides hose break protection, prevents loads from drifting and positively locks pressurized loads.
  • Extremely low leakage. The seat and poppet are heat treated for long life. If the load drifts due to the valve, the seat has probably been damaged by contamination and the valve should be replaced.
  • Sealed pilot for use in circuits where cross port leakage is undesirable.
  • Port 4 (vent) should never be blocked as seal weepage will eventually cause valve to malfunction.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data:
CavityT-21A
Series1
Capacity15 gpm
Maximum Operating Pressure5000 psi
Pilot Ratio3:1
Maximum Valve Leakage at 110 SUS (24 cSt)1 drops/min.
Valve Hex Size7/8 in.
Valve Installation Torque30 - 35 lbf ft
Adjustment Screw Internal Hex Size1/8 in.
Locknut Hex Size7/16 in.
Model Weight0.39 lb.
Seal kit - CartridgeBuna: 990021007
Seal kit - CartridgeEPDM: 990021014
Seal kit - CartridgePolyurethane: 990021002
Seal kit - CartridgeViton: 990021006
Detailed photos:




Some other models:
CKGVLCN CKEDXAN CKCDXAN CKIGSEN CKGDXCN CKCBXBV CKGBXCN CKEBXCN CKCDXCN CKIBXCN CKGBXAN CKEBXAN CKEVXCN CKGBXDN CKCBXEN CKGDXAN CKEDXCN CKBBXCN CKEBXBN CKCBXAN CKIBXBN CKCBXCN CKEBXCV CKBBXCV CKCBLCN CKIDXCN CKGVXCN CKBDXCN CKEBXEN CKEBLCN CKEDXFN  CVCVLCN CVCVXCN CVGVXAN CVEVXCN CVGVXCV CVCVXEN CVGVXEN CVGVXFN CVGVXCN CVEVXAN CVCVXCV CVIVXCN CWCALHN CWCGLGN CWELLGN CWEALIN CWCGLFN CWCALHV CWEGLGN CWGGLFN CWCKLIN CWEALHV CWIALIN CWGGLGN CWCKLHN CWCLLGN CWEALHN CWIALHN CWEKLHN CWGLLGN CWEGLFN CWEKLIN





Scroll to Top