Shixin High Temperature and Aging Resistance Self Adhesive Insulation Alu Foil Duct Tape

Min.Order: 10,000
Product origin: Suqian, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 0.5

Description
PRODUCT DESCRIPTION
A nominal 30 micron (1.2 mil) silicone release coated aluminum foil backing ,combined with water-acrylic pressure sensitive adhesive. 
Application


FEATURES
 Aluminum Foil Tape Without Liner makes easy application.
• Aluminum backing provides excellent reflection of both heat and light.
• High quality adhesive with strong adhesion and holding power offers permanent sealing and bonding on Foil-Scrim-Kraft Facing joints and seams in HVAC ductwork application.
• Good aging resistance both indoors and outdoors.
• Low moisture vapor transmission rate offers excellent sealing and patching performance.

TYPICAL PHYSICAL PROPERTIES
PROPERTIESMETRIC
ENGLISH
TEST METHOD
Backing Thickness30 Micron1.2 MilPSTC-133 / ASTM D 3652
Total Thickness60 Micron2.4 MilPSTC-133 / ASTM D 3652
Adhesion to Steel12 N/25mm43.2 Oz./In.PSTC-101 / ASTM D 3330
Tack Rolling Ball5 cm2.0 In.PSTC-6 / ASTM D 3121
Tensile Strength45 N/25mm10.2 Lb/InPSTC-131 / ASTM D 3759
Elongation3.0 %3.0 %PSTC-131 / ASTM D 3759
Service Temperature-30 ~ +120 °C-22 ~ +248 °F------------
Applying Temperature+10 ~ 40 °C+50 ~ +105 °F------------
TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications - indoors and outdoors.
 
PRODUCT FORM & SIZE AVAILABLE
ROLL WIDTH:  48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")
ROLL LENGTH: 50M / 100M / 150M / 200M / 250M / 300M
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user's method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).
 
 
 
 

 

Product Tag:
Related categories:
Scroll to Top