Fully Automatic Concrete Block Making Machine

Product Information:

Technical Parameters
Mold box size (length x width x height) 66QX54QX20 - 24 0mm	66QX54QX20 - 24 0mm
Number of forming blocks (depending on the size of the bricks) spacer blocks	Pad: 20-00  pieces/module Pavement bricks: 20 pieces/mold Mixed earth blocks: 3-20 blocks l mold
Design production capacity (depending on brick size)	pads:3.5-150,000 yuan/class Pavement bricks: 0.8-30,000 pieces/shift Mixed soil blocks: 0.6-35,000 blocks/class 200 support bars: RMB 50,000/class
Vibration frequency	00 times/min - - 6100 times/min
Vibration force	about 22KN
Vibrator power	Y132S 1-12N =6KW
Oil pump	Cd32 level or so, Q=40 n.Jr, P=!Om p a
Top cylinder	80 X300 rod diameter 32
Side cylinder	63 x250 rod diameter 32
Rated pressure of hydraulic system	27.5 MPa
Installed capacity	14.5kw
Pallet specifications	680 X535 Xi 5 to 30mm
Whole machine weight	about 4800kg
Overall machine dimensions	approximately 6000 X 3500 X2300mm

Product Description:Molding principle and characteristics: QTY3-15 multifunctional block forming machine is a new product that combines hydraulic pressure and vibration. It mainly uses hydraulic cylinders to complete the feeding, pressurizing, and mold ejection actions, and gives a certain amount of pressure. The motor-driven vibration mechanism installed under the main machine vibrates at high frequencies. Its specific working procedure is: first raise the upper mold to the highest point, lower the lower mold to the lowest point, withdraw the feeding drawers to the end, and add the bottom material to the shaft drawer. Inside, pull the bottom material reversing valve to send the bottom material into the lower mold. At this time, the vibrating button vibration mechanism starts to work (vibrate for about 1.5-3.0 seconds). When the vibration ends, raise the upper mold to the highest point; pull the The secondary distribution directional valve sends the fabric into the lower mold and returns. At this time, the hydraulic system is unloaded. Pull the handle of the upper mold reversing valve to make the upper mold drop to the material level with its own weight. Pull the handle of the reversing valve and press the forming button at the same time. , start the molding vibration. After the molding vibration ends, pull the handle of the reversing valve of the first mold to raise the lower mold to the appropriate height, and then pull the reversing valve of the upper mold to raise the upper and lower molds to the highest point together to facilitate brick production. ; Click the brick out button. At this time, the plate in and out mechanism starts to work. The plate feeding system sends the pallet into the vibrating table. At the same time, the formed bricks are pushed out of the host machine and sent to the plate unloading machine, completing a cycle of in and out plates.
Introducing our Industry-Leading Performance Block Maker, the ultimate solution for all your block making needs. With cutting-edge technology and unmatched performance, this machine is designed to revolutionize the block making industry.

When it comes to block making machine price, our Industry-Leading Performance Block Maker offers exceptional value for money. We understand the importance of cost-effectiveness in today's competitive market, and our machine is priced competitively to ensure maximum return on investment.

The future of block making is here, and our Industry-Leading Performance Block Maker is at the forefront of this revolution. With its advanced features and innovative design, this machine is poised to shape the future of the block making industry.

Whether you are looking to import or export block making machines, our Industry-Leading Performance Block Maker is the perfect choice. With its superior quality and reliability, it has gained recognition in the international market, making it a preferred choice for businesses worldwide.

We stand behind the quality of our Industry-Leading Performance Block Maker with a comprehensive warranty. This ensures that you can have peace of mind knowing that your investment is protected.

To make the purchase process even more convenient, we offer flexible financing options. This allows you to choose a payment plan that suits your budget and business needs.

In addition to purchasing, we also offer rental options for our Industry-Leading Performance Block Maker. This allows you to access the machine without the need for a large upfront investment.

When it comes to comparing block making machines, our Industry-Leading Performance Block Maker stands out from the competition. Its superior output, speed, and weight make it the preferred choice for businesses looking to maximize productivity.

To assist you in troubleshooting any issues that may arise, we provide a comprehensive troubleshooting guide. This ensures that you can quickly identify and resolve any problems, minimizing downtime and maximizing efficiency.

Proper maintenance is crucial for the longevity and performance of your block making machine. That's why we provide maintenance tips to help you keep your Industry-Leading Performance Block Maker in optimal condition.

With its scalable design, our Industry-Leading Performance Block Maker can adapt to the changing needs of your business. Whether you need to increase production or expand your operations, this machine can grow with you.

We understand the importance of environmental sustainability, which is why our Industry-Leading Performance Block Maker is designed with minimal environmental impact. Its energy-efficient operation ensures that you can reduce your carbon footprint while maximizing productivity.

Experience the future of block making with our Industry-Leading Performance Block Maker. With its advanced automation features, it streamlines the production process, saving you time and labor costs.

In terms of dimensions and specifications, our Industry-Leading Performance Block Maker is designed to fit seamlessly into your existing production setup. Its compact size ensures that it can be easily integrated into your workflow without taking up excessive space.

Choose our Industry-Leading Performance Block Maker and experience the difference in quality, performance, and efficiency. Take your block making business to new heights with this state-of-the-art machine.
Installation and debugging:
1. Install the brick machine unit in place as shown in the basic diagram; connect the feeding auxiliary machine, the incoming and outgoing plate machines with the main machine, adjust the height, and tighten the bolts of each part.
2. Add hydraulic oil to the oil tank until the oil level can be displayed on the oil level gauge.
3. Connect the power supply and turn on the power switch in the electrical box. At this time, the power indicator light is on; put the handle of each manual reversing valve in the middle position to put the system in an unloaded state; start the oil pump motor and check the motor rotation direction (reverse There is no oil pressure when turning).
4. Adjust the system pressure. At least one group of the combination valves is not in the neutral position. Turn on the pressure gauge switch and adjust the relief valve handle (clockwise to increase the pressure and counterclockwise to decrease the pressure) until the system pressure is 5.9-6.3mpa. Lock nut , close the pressure gauge switch (it is not necessary to adjust the pressure switch frequently during normal production. It is only opened when adjusting the pressure); all directional valves are in the neutral position when the system is unloaded. The pressure gauge index is "0-1", and the left and right are back pressure.
5. Turn the handle of the directional valve and observe whether the oil cylinder operates normally, check whether the relationship between the pressure head and the mold core is correct, and whether there is any obstruction to the feeding drawer's entry and exit. After all are normal, you can prepare for production.
 Operational use
1. Put the pallet into the plate feeder box, press the plate feeder button, and send the pallet to the vibrating table under the host machine. Raise the upper mold to the highest point, lower the lower mold to the lowest point, and withdraw the feeding drawer. to the end.
2. Add base material: Send the raw materials mixed according to the proportion into the hopper from the conveyor, pull the base material reversing valve to send the base material into the lower mold, press the feeding button, and the vibrator starts to work at this time, adding materials. The time is generally 1.5-3.0 seconds (adjusted with a time relay). When vibrating, the feeding drawer returns (note that the material layer should be flat and without dents).
3. Add fabric (when there are products that require secondary fabrication). When the base material drawer returns to the starting position, add the fabric and spread it out. If there is two-way feeding, you should lower the upper mold and press down to level the base material, and then add it. The mold is raised, and the fabric drawer moves forward to spread the mold core completely.
4. Pressurized vibration molding: Pull the handle of the reversing valve of the upper mold to make the pressure head drop to the material level by its own weight. Pull the handle of the reversing valve and press the forming button at the same time to start forming vibration. The pressurized vibration time is generally controlled at 3-5 seconds. The vibration time of the molding vibration should be adjusted according to the dryness and humidity of the ingredients to ensure a high degree of product consistency. During the last 0.5 seconds of the molding vibration, return the unloading handle to the neutral position and implement pressurized vibration.
5. Demolding: After the vibration molding is completed, move the handle of the drawer reversing valve to the unloading position, pull the handle of the upper mold reversing valve once to lock it in the neutral position, and then move the handle of the drawer reversing valve back to the neutral position. , pull the handle of the reversing valve of the lower mold to raise the lower mold to an appropriate height (the same height as the molded product), then pull the reversing valve of the upper mold to raise them to the highest point, and use the lower mold to drive them up to the brick output height. In order to produce bricks.
6. Brick output: Click the trigger button, and the plate feeder will push the empty tray into the host vibration table and push out the molded product to the plate unloader. The plate unloader will then send the product to the brick pusher, and the molded product will be sent to the brick pusher. After arriving at the brick yard, gently move the bricks down and put them away with your hands. When stacking bricks, a layer of fine sand should be sprinkled on the surface to prevent them from sticking. Generally, 5-8 layers are placed. For products that cannot be moved (such as hollow core blocks), use pallets for maintenance, and fill the space between pallets with more than the product. height of small wooden blocks for isolation.Production technology and ingredients: 1. The production site should be more than 300 square meters, the factory building can be 100-200 square meters, and there must be a three-phase power supply.
2. First of all, prepare some pallets to support the bricks. You can use old templates or bamboo plywood to cut them. Pallet specifications: 680 x 535x! 5 to 30 mm, quantity: 1 00 0-1500 pieces.
3. The cement should be No. 32.5 or No. 500 cement with good quality. If conditions permit, some fly ash, fine sand, fine stones within 0.5, and coarse sand can be prepared. Stone powder can also be used directly, which contains both stone surface and less fine stone particles.
FAQ
Q1: How can I trust your company?
A. We have excellent technical and sales teams
B. We can provide you with the perfect solution at the lowest cost.
C. All equipment has been evaluated by a third party and has obtained national patents and certifications.
D. Regarding machines, we do better and quality issues can be guaranteed.
Q2: How to get after-sales service?
A. We provide one year warranty and lifetime maintenance.
B. If the problem is caused by us, we will send you spare parts for free.
C. If it is a man-made problem, we also send spare parts, but it will be charged.
D. Any questions, you can call us directly.
Q3:Can I visit your factory before ordering?
Of course, welcome to visit our factory at any time.
Q4:. Can you update the production process information in time after placing the order?
Once your order is confirmed, we will keep you updated with the production details with email and photos.
Q5: Can we be your agent?
Yes, we are looking for agents worldwide, we will help agents to improve the market, and provide all services such as machine technology
Questions or other after-sales problems, meanwhile you can get big discounts and commissions.
Q6: Payment terms?
T/T, L/C, Western Union, 
Q7: Do you accept customer logo and customization?
We accept all kinds of customization including logo and machine.