Complaint
| Steel Grade | Q195,Q235,Q345,45#, S20C, SAE1010,SAE1020.SAE1045,EN8,EN 19fC45,CK45,SS400 etc | |
| Standard | ASTM A615Gr40/60,BSS4449 Gr460B,500B etc | |
| Diameter | 6mm-1200mm | |
| Length | 3000mm-12000mm or as client's request | |
| Straightness | 3mm/M max | |
| Tolerance | +0.5mm/-0(dia),+5mm/-0(L) | |
| MOQ | 1 tons | |
| Heat treatment | Normalized / Annealed / Quenched / tempered | |
| Surface | black,mill,polished,brush,etc | |
| Test | Ultrasonic test according to SEP 1921-84 G3 C/c | |
| Application | Widely used in construction industry for reinforcing concret(Express way; office building, Bridge etc) Trasportation By sea(20' 40' container), parts of larger cross-sections, crankshafts, gears. | |
| Trade Term | FOB,CFR,CIF | |
| Payment | 30% advance by TXT; Balance pay before the shipment against shipping documents or irrevocable LC at sight | |
| Packaging | Export standard, seaworthy | |
| Delivery time | 10-20days after confirmed order | |
| Loading port | Tianjin port | |
| Container size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) | |
| 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) | ||
| 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) | ||
| Item Type | Diameter (MM) | Length |
| Round Bar | 8-400 | 6/9/12m or follow client's requirment. |
| Steel Wire Rod | 5.5-34 | Coil |
| Steel Rebar | 5.5-40 | Cut to length or Coil |
| Category | Grades | Sizes | Standard |
| Carbon structure steel | Q195,Q215,Q235,Q275 | 16mm-250mm | GB/T700-2006 |
| Low alloy high strength structure steel | Q295,Q345,Q390,Q420, Q460 | 16mm-250mm | GB/T1591-2008 |
| Prime Carbon structure steel | 10#, 20#, 35#, 45#, 60#, 20Mn,65Mn,B2, B3,JM20, SH45,S45C,C45 | 16mm-250mm | GB/T699-1999 |
| Alloy structure steel | 30Mn2,40Mn2,27SiMn, 42Crmo, 20Cc40Cr,20CrMo, 35CrMo,20CrMnTi, 30CrMnTi,20MnVB, 20MnTiBf 45MnV 20CrNiMo, Q345B, 35MnBM,40MnB,36Mn2V | 16mm-250mm | GB/T3077-1999 |
| Spring Steel | 65Mn,60Si2Mn, 50CrVA | 16mm-250mm | GB/T1222-84 |
| Bearing Steel | GCr15tGCr15GD,55SiMoV | 16mm-250mm | GB/T18254-2002 |
| Structural steels subject to end-quench hardenability requirements | 20CrMnTi,30CrMnTi, 20Cr, 40Crf30CrMo,42CrMoA,27SiMn, 40Mn2H, 20CrNiMo, 40Mn2,q345b,35MnBM, 40MnB,45MnV. | 16mm-250mm | GB/T5216-2004 |
| Oil wells structural steel | 37Mn5,36Mn2V | 16mm-250mm | Q/LYS248-2007 |
| Marine anchor chain steel | CM490,CM690,M30Mn2 | 16mm-250mm | YB/T66-1987 GB/T18669-2002 |
| Chemical Composition ASTM A105 / 105N Carbon Steel Round Bars | |||||
| Carbon Steel Grades | C | Mn | Si | S Max. | P Max. |
| Ck 45 | 0.42/0.50 | 0.50/0.80 | 0.15/0.35 | 0.04 | 0.04 |
| Ck 55 | 0.52/0.60 | 0.60/0.90 | 0.15/0.35 | 0.04 | 0.04 |
| Ck 60 | 0.57/0.65 | 0.60/0.90 | 0.15/0.35 | 0.04 | 0.04 |
| SAE1006 | 0.08 max | 0.25/0.40 | 0.10/0.30 | 0.05 | 0.04 |
| SAE1008 | 0.10 max | 0.30/0.50 | 0.10/0.30 | 0.05 | 0.04 |
| SAE1010 | 0.08/0.13 | 0.30/0.60 | 0.10/0.30 | 0.05 | 0.04 |
| SAE1018 | 0.15/0.20 | 0.60/0.90 | 0.10/0.30 | 0.05 | 0.04 |
| SAE1020 | 0.18/0.23 | 0.30/0.60 | 0.10/0.30 | 0.09 | 0.04 |
| SAE1030 | 0.28/0.34 | 0.60/0.90 | 0.10/0.40 | 0.05 | 0.04 |
| SAE1035 | 0.32/0.38 | 0.60/0.90 | 0.10/0.40 | 0.05 | 0.04 |
| SAE1040 | 0.37/0.44 | 0.60/0.90 | 0.10/0.40 | 0.05 | 0.04 |
| SAE1045 | 0.40/0.50 | 0.60/0.90 | 0.10/0.40 | 0.05 | 0.04 |
| En-8D | 0.40/0.45 | 0.70/0.90 | 0.05/0.35 | 0.06 | 0.06 |
| En-9 | 0.50/0.60 | 0.50/0.80 | 0.05/0.35 | 0.06 | 0.06 |
| ASTM A105 / A105N Carbon Steel round bars Mechanical Properties: | ||||||
| Property | Ultimate Tensile Strenght | 0.2% Yield Strenght | Elongation | Reduction of Area | Charpy Impact Toughness | Hardness |
| Value | 70 Min | 36 Min | 30% Min | 22% Min | 30 | 187 HBW MAX |
| Ksi(485 Mpa) | Ksi (250 Mpa) | |||||
