Auto Extinguishing Control Panel Fire Trace Suppression Systems

Min.Order: 10

Product origin: Hangzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 620 ~ 645

Description

Auto Extinguishing Control Panel Fire Trace Suppression Systems

1.BACKGROUND

The characteristics of electrical fire hazards are the distribution, persistence and concealment of fire hazards. Due to the wide distribution of electrical systems and long-term continuous operation, electrical lines are usually laid in concealed places (such as ceilings, cable trenches), and are not easy to be detected by the fire alarm system at the initial stage of a fire, nor are they easy to observe with the naked eye. The danger of electrical fire is also closely related to the electricity consumption. When the electricity load increases, it is easy to cause electrical fires due to overcurrent.

The casualties, property losses and social shocks caused by the fire are huge. Electrical fires mainly occur in buildings, where people are close, evacuation is difficult, and smoke is not smoothly exhausted. It is very easy to cause serious accidents of mass death and injury.

2.PRINCIPLE OF SYSTEMS(Indirect type)

PRI-SAFETY electric equipment fire suppression systems have been specifically designed to protect electric equipment and put out electric fires caused by leakage electric(class E fire) quickly and efficiently.

These self contained pneumatic systems require no external energy or power supply. Upon flame impingement or heat, the pressurized detection tubing will burst and activate the cylinder valve to open and release the extinguishing agent.

PRI-SAFETY electric equipment fire suppression systems are specifically designed to extinguish fires of electric panel, battery bay, control panel, electric equipment etc. It is developed to prevent damage of equipment, records, people and other assets that are vital to a business.

3.PRODUCT DRAWING

The temperature sensor send temperature signal to control panel, the control panel can indicate the temperature at anytime, once temperature reach 100 ºC, the fire alarm was activated. Once the temperature reach 140ºC, control panel will send signal to electric valve to open it. Then the agent was discharged from dischange tube and nozzles. On the control panel, there is a manual button and test button, reset button, in Emergency pushing the manual button can activate the fire system too.
4.COMPONENTS

5.PRODUCT ADVANTAGES

*Simple, high quality and well engineered system. Easy to install.
*Fast, automatic actuation.
*We use gas instead of water to put out the fire without causing damage.
*When a fire occurs, the system will first detect it and then feedback control the fire extinguishing system to turn on and extinguish the fire within 10 seconds.
*Remaining operational during power interruptio.
*There is no need for manual close fire fighting.

6. PRODUCT PARAMETERS

Items No.	EFS-01	EFS-02	EFS-06	EFS-09	EFS-12	EFS-25
Capacity	1Kg	2Kg	6Kg	9Kg	12Kg	25Kg
Out-Dia.(mm)	90	110	160	180	180	257
Cylinder Length(mm)	270	302	450	485	621	775
Volume(L)	1.29L	3.8L	7.8L	10.5L	16L	35L
Extinguishing Agent	FM200	FM200	FM200	FM200	FM200	FM200
Working Pressure(bar)	14bar	14bar	14bar	14bar	14bar	14bar
Test Pressure(bar)	27bar	27bar	27bar	27bar	27bar	27bar
Cylinder Material	ST12 or SS304	ST12 or SS304	ST12 or SS304	ST12 or SS304	ST12 or SS304	ST12 or SS304
Discharge Pipe	φ6mm SS304	φ6mm SS304	φ12mm SS304	φ16mm SS304	φ16mm SS304	φ16mm SS304
Certificate	CE marked	CE marked	CE marked	CE marked	CE marked	CE marked
Activation Temperature Detection Tube	140ºC	140ºC	140ºC	140ºC	140ºC	140ºC

7.CERTIFICATION

8. APPLICATION

1kg---For 0.1~0.5m Electric Panel

2kg---For 0.5-1m Electric Panel

9kg---For 1.5-2m Electric Equipment

6kg---For 1-1.5m Electric Panel

12kg--- For 2-2.5m Electric Room

25kg--- For 2.5~3.5m Electric Room

Bigger capacity could be customized

Electric Panel,Battery Bay,Control Panel,Electronic Equipment,Server Panel/Room

9. PACKING&SHIPPING

10. ABOUT US

11. EXHIBITION

12. FAQ
Q1. May I get a sample before placing an order?
A1. Yes, no problem.

Q2. Are your company PRI-SAFETY a manufacturer or trading company?
A2. We are a manufacturer.

Q3. Can you print our logo on products?
A3. Yes, no problem. We also support OEM.

Q4. How long does it take to delivery?
A4. In 30-45 days after receipt of 30% deposit.

Q5. What's your MOQ?
A5. Fire extinguisher is class2.2 Dangerous Goods, it should be loaded with full container.
But if you have another goods shipping together or you need empty type, our MOQ is 100 sets.

Q6.What's your Payment Term?

A6.We support T/T,L/C,Credit Card,Western Union etc.

Forward

Related products