Complaint
Touch Screen Portable Dental Camera X-ray Camera Machine With Rvg Sensor
| X-Ray Unit Input Power | 16.8VAC, 2.0A |
| Li-ion Charger Input Power | 100-220V, 50-60Hz |
| X-Ray Unit Output Power | 80W |
| Li-ion battery Capacity Output Power | 14.8VDC, 10A |
| Tube kV/mA | 60KV/1mA (Built in adjustable) |
| Li-ion battery Capacity | 7800mAh |
| Frequency | 20KHz |
| Exposure Time | 0.2-2s |
| Nominal Focal Spot Value | 0.3mm |
| Total Filtration | 1.75mmAl |
| Display | Touch/LCD Screen |
| Packing Size | 35*16*25cm |
| Weight | 3kg |
| Frequency | High |
FEATURES:
1 The microprocessor-controlled tmer brings high-tech x-ray imaging at your fingertips.
2 The control panel allows an accurate and fast exposure time selection while protecting the head during x-ray examinations.
3 Fitted with 70kv 8ma tube with preheating grid, the machine has been specially designed for intra-oral dental diagnosis applications
4 Complies with local and international regulations on ionizing radiation protection for maximum safety.
5 The soft positioner arm ensures naturally smooth and well-balanced movements. It is easy installed at the height and length.
6 Its ergonomics and design have been studied to meet the requirements of the most semanding practices in matters of floor space optimization.
SPECIFICATION:
1.1 Power parameter
1. Input Power: 100-220VAC/50-60Hz/1.2A
2. Output power: 14.8 VDC / 10 A
3. Li-ion battery capacity: 7800mAh
1.2 X-ray generator Parameters
1. Input Power: 16.8VAC/2.0A
2. Output power: 80 W
3. Tube voltage / current: 60KV/1mA
4. Operating frequency: 20KHz
5. Exposure time: 0.1-2.5S
1.3 X-ray tube parameters
1. Max. Operating tube voltage: 80KVp
2. Filament features: 3±0.5V/2.5A
3. Nominal focal spot value: 0.3mm
4. Target angle: 12°
5. Inherent filtration: 0.75mmAl
1.4 Machine parameters
1. Display mode: LCD color touch screen
2. Packing size: 35X16X25cm
3. Net weight: 2.0kg
1.5 Beam limiter parameters
1. Output the focal length: 110 mm
2. Output radiation scope: φ5mm
CONTROL SYSTEM:
1.1 Control system description
1. The microprocessor control system.
2. According to the tooth bit and mode automatically choose the exposure time , time range: 0.1 -2.5 S.
3. Manually adjust the exposure time, every time to adjust time of 0.1 S.
4. Equipped with three block mode selection switch, respectively is: children, adults and RVG (digital sensing mode).
5 .Manual switch can choose can extend and hand control wire.
