Complaint
Product introduction | ||
Multi-purpose nitrocellulose single group grey primer. To fill the marks or minor indentations left by the grinding of sandpaper,And provides simple isolation, is a kind of general economic type primer. | ||
Product characteristics |
| |
Economy, can reduce cost. |
| |
The paint film is exquisite, filling ability is good. |
| |
Single unit, easy to construct. |
| |
Fast drying and easy to polish. |
| |
Physical parameters |
| |
Appearance status | Grey thick liquid |
|
Nonvolatile component | 54±3% |
|
gloss | matte |
|
specific gravity | About 1.2±0.1kg/L |
|
viscosity | 5:1 Acetic acid butyl ester100±10S(-4 cups,25ºC) |
|
auxiliary product |
| |
thinner | Universal thinner |
|
Construction parameters |
| |
Mix proportion | Gray primer volume 1 |
|
Universal thinner volume 1~1.5 |
| |
mix before use |
| |
Spraying viscosity | 18~22 seconds(-4cups,25ºC)) |
|
Spraying tool | Upper pot spray gun diameter of 1.4~1.6mm |
|
The lower pot nozzle diameter is 1.6~1.8mm |
| |
Spraying pressure | Gun pressure for 3~5kg/cm |
|
Spraying method | Spraying layer, each layer of evaporation time for 5 ~ 10 minutes (25 ºC),If the plastic parts are repaired, thin the first layer and give a longer evaporation |
|
Film thickness | 20~30 micron |
|
drying time | Can be polished:30 minutes(25ºC),10 minutes(60ºC) |
|
Dry consolidation | 400#~600# sandpaper to Dry grinding or 800#~1000# sandpaper to water grinding |
|
Nonapplicable range | Does not apply to stainless steel, aluminum, zinc, iron, wood and other surfaces |
|
considerations | 1.Recommended for local repair, not recommended for large area construction; |
|
2.If high adhesion and strong corrosion resistance are to be obtained, it is recommended to apply a dual-component paint. |
| |
3.It is not recommended to use diluents with high moisture content and too fast drying. |
| |
Packing specification |
| |
1L*12,,4L*4 |
| |
storage |
| |
The storage period of the open tank is 2 years | ||
