Laboratory Tapered Twin-Screw Extruded PE Pipe Production Line

Min.Order: 1

Product origin: Harbin, Heilongjiang, China

Infringement complaint:

Complaint

US$ 26000

Description

Laboratory Conical Twin-screw Extruder can be integrated by main unit and conical twin-screw extrusion unit. That can be used to simulate real production process in the laboratory.Because of its special structure, the residual material can be cleaned quickly. In the measuring extrusion unit, the sample material begin plastify under practice-oriented conditions and extruded through the die head.Matched well with different die heads ,it's used for extruding the Belt, Tube, PCPO and granulation .

Conical Twin-screw platform is consist of the Drive device, Feeding device, Barrel ,Twin-screw and Dies parts, etc. The Twin-screw is the heart of the extruder, divided into the charging section (solid conveying zone), compression section(melting zone) and the homogenization section (the melt conveying zone) three parts. Put the material into the hopper ,under the action of a rotating screw, material was pushed on to the direction of the nose. Material endures strong shear, mixing and calendaring in the barrel, In this process, Meanwhile, the physical states of material the evolve from glass state to the high elastic state ,eventually become sticky flow pattern .

Equipment composition
Drive device

It is mainly used to complete the plastic plasticizing and transportation by uniform rotation for torque setting, Servo motor control screw torque, pre-set torque from touch-screen.

Feeding device

Conical Twin-screw platform adopts screw metering feeding device. According to the properties of material production and processing technology conditions, adjust the volume of feed speed and extrusion in order to achieve the balance.

Barrel

Two threaded bores opposite each other are provided at the end of the barrel of each measuring extruder for taking a thermocouple and a pressure transducer for measuring the temperature and the pressure of the melt in front of the die channel.

Screw

Because of its rotation, the powder or particle shape plastic was pushed to the former, so as to achieve compaction, melting and mixing purpose of homogenization.

Dies

The Hapro die heads can easily be connected to the different extruders The die heads can be interchanged quickly and easily. They are heated electrically and have a separate control circuit. The die heads can be disassembled for cleaning. Various die heads are available for specific measuring tasks.

Technical Parameters:

Photograph	Performance Index	Performance Parameter
	Barrel structure	Pull and turn
	Screw Diameter	20 mm
	Screw Length	325mm
	Temp control system	RKC from Japan
	Temp sensor	J type thermocouple
	Heating	Electrical Heating/4 Zones
	Heating power	3.2 kW
	Max. Temperature	350ºC
	Cooling	Air Compression
	Pressure range	0~100 Mpa
	Feeding speed	Manual adjustment
	Feeding	Screw metering feed
	Output	0.45 -11 kg/ hr
	Die heads (Select one from three)	Flat Die ( L×W:60×1.5 mm, 0.8 kW)
		Pipe Die (Inner Ф10, Outer Ф12.5, 0.6 kW )
		Granulating Die( Ф3×2)
	Weight	250 kg
	Dimension (L×W×H)	1000×570×1500 mm