Complaint
| Model | ENC12/24-25 | ENC12/24-30 | ENC12/24-40 | ENC12/24-50 | ENC12/24-60 |
| Input voltage | AC110V(90-165V) or AC220V(190-265V) | ||||
| Output voltage | DC12V/24V Auto | ||||
| Max. charge current | 25A/13A | 30A/15A | 40A/20A | 50A/25A | 60A/30A |
| Protection functions | Reverse Polarity, Short-circuit, Over current protection, Over heat | ||||
| Charging way | Automatic 3 stage | ||||
| LED indicator | 3 LED indicator for different charge status | ||||
| Temp. Compensatin | Optional | ||||
| Temp. Sensor | Optional | ||||
| QTY/Ctn | 20pcs | 6pcs | |||
| Meas. /Ctn | 57*32*46.5cm (L*W*H) | 56*33*60cm (L*W*H) | |||
| Packing | Gift box | ||||
| Certification | CE-LVD/EMC, RoHS | ||||
| Warranty | 24 months | ||||
2 YEARS WARRANTY
Multi Plugs Can Be Selected
Product Display:
1. The shell is made of high temperature, wear-resistant, impact resistant ABS+PC composite material. It can effectively improve the heat dissipation and ensure that the temperature of the power supply is not excessive
2. Smart Cooling hole with fan design
That can effectively improve the heat dissipation of the power source, so that the charger can be kept in the proper humidity and temperature, and effectively prolong the service life of the charger.
FAQ:
Q. How do I know if the battery is charged?
A. The charger's FULLY CHARGED LAMP will illuminate (solid). Alternatively use a BatteryHydrometer A reading of 1.250 or
more in each cell indicates a fully charged battery.
Q. I have connected the charger properly but the 'CHARGING LAMP' does not come on?
A. In some cases batteries can be flattened to the point where they have very little or no
voltage. This can occur if a small amount of power is used for a long time, for example
a map reading light is left on for a week or more. MBC/MXC battery chargers are
designed to charge from as little as 12V charger 2.0 Volts and 24V charger 4.0 Volts
If the voltage is lower than 2.0 Volts and 4.0 Volts use a pair of booster cables to connect between
two batteries to provide more than 2.0 Volts and 4.0 Volts to the battery being charged. The charger
can then start to charge the battery and the booster cables can be removed.
Q. Can I use the charger as a power supply?
A. MBC/MXC battery chargers are designed to only supply power to the battery clips when
they are connected correctly to a battery. This is to prevent sparks during connection to
the battery or if connected incorrectly by mistake. This safety feature prevents the
charger from being used as a 'Power Supply'. No Voltage will be present at the clips
until connected to the battery.
Welcome to the world of FX!
