Complaint
cheap Manual discharge Sheet plate plane die cutting machine
Model | 320B |
Cutting speed | 20-100 (t/m) |
| Mold cut width | 320mm |
Max mould cutting area | 300*300mm |
Orientation accuracy | ±0.10mm |
Motor power | 3kw |
Power voltage | 220v±10% |
Machine weight | 200kg |
Measurement | 1200x730x1130mm |
The working principle of the flat die-cutting machine is: the product model that has been opened according to the product drawing in advance is stamped into the specified shape by means of upper and lower stamping. The entire operation process of the die-cutting machine is driven by the servo motor to pull the material to drive the automatic feeder to feed. , Passing through the feed can complete some actions of the film, passing through the die-cutting machine of the die-cutting machine, draining the waste of the frame, and cutting into pieces to complete some of the entire process. Compared with other die-cutting equipment, the flat die-cutting machine has the advantages of convenient operation, convenient maintenance,easy replacement of die-cutting indentation plates, suitable for materials of different weights, and precise die-cutting, so it has been widely used
Die-cutting machines are also called beer machines and CNC punching machines. They are mainly used for die-cutting (full-break, half-break) and pressing of corresponding non-metallic materials, stickers, EVA,double-sided tape, electronics, mobile phone pads, etc. Marking and bronzing operations, laminating, automatic waste discharge,the die-cutting machine uses steel knives, metal molds, steel wires (or stencils carved from steel plates), and applies certain pressure through the embossing plate to cut the printed products or cardboard into Certain shape. It is an important equipment for post-press packaging processing and shaping.
The working principle of die-cutting machine is to use steel knives, hardware molds, steel wires (or stencils carved from steel plates) to apply certain pressure through the embossing plate to roll and cut printed products or cardboard into certain shapes.If the entire printed product is press-cut into a single graphic product, it is called die-cutting; if the steel wire is used to make traces on the printed product or leave a bent groove, it is called indentation; Heated to a certain temperature, hot stamping of patterns or fonts with a three-dimensional effect on the surface of the printed product is called hot stamping; if one substrate is used to overlay another substrate, it is called laminating; except for the genuine product, the rest is called To discharge waste; the above can be collectively referred to as die cutting technology.
Die Cutting Machine , also known as cutting machine, CNC punching machine, is mainly used for die-cutting (completely broken) of corresponding non-metallic materials, stickers, EVA, double-sided tape, electronics, mobile phone pads, etc. , Semi-broken),indentation and bronzing operations, laminating, automatic waste removal, die-cutting machine uses steel knives, hardware molds,steel wire (or a template carved from steel plates), and applies a certain pressure through the imprinting plate to print The product or cardboard is rolled and cut into a certain shape. It is an important equipment for post-press packaging processing and forming
The die-cutting process is the most commonly used process for packaging printed matter. It uses a die-cutting knife to combine the patterns required by the product design to form a die-cutting plate. Under pressure, the printed matter or other ring-packed blanks are rolled into the desired shape or The forming process of the cut marks. The creasing process is to use a crimping knife or a crimping die to make a line mark on the sheet through the action of pressure, or use a rolling wheel to bend and shape the board at a predetermined position. Usually, the die-cutting and creasing process is a process of combining the die-cutting knife and the crimping knife in the same template, and simultaneously performing die-cutting and creasing processing on the die-cutting machine, which is referred to as die-cutting.Process introduction The main process of die-cutting and indentation is:uploading→adjusting pressure→determining the rules→adhesive base material accessories→test pressure die-cutting→formal die-cutting and indentation→removing waste→finished product winding or cutting into pieces→points package
Kunshan Hexin Precise Machinery Co., Ltd is an automated and intelligentized machinery manufacturing company which is specialized in research and development, production, sales and services of cutting machines, automatic slitting machines, thermal laminating machines, precise laminating machines and die cutting machines.In 2013, We got the certificate for "national high-tech enterprise". Our company has got nearly 20 patents and has passed the SGS factory qualification certification and the CE certificate. Our products are sold not only to the whole Chinese market, but also are exported to Germany, USA, UK, Spain, Turkey, Australia, Thailand, Canada, Argentina, Japan, South Korea and so on, more than 50 countries and areas. The machines are honored by the customers from home and aboard.
