Product Details | |
Product name | N09901 Alloy Seamless Pipe Incoloy 901 For Gas Turbine Engine Rotating Disc |
Brand name | ABOOM |
Standard | ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459 |
Material | N08367 Al-6XN 1.4501 Incoloy25-6hn NAS 255NM |
Surface | Pickling, 400grit polishing, 600grit polishing, mirror finish |
Certificate | BV, LR, GL, NK, RMRS |
Packing | In bundles with waterproof material, in wooden cases |
Shipment | By sea, by air, by express |
Material designation: Incoloy 901 nickel based alloy
US grade: UNS N09901
German grade: 2.4662
Incoloy 901 application profile and special requirements:
This alloy is widely used in aero engines and ground gas turbines for rotating parts and fasteners working below 650 ° C, and has a long service life. It has also been used in aviation engines in China, and it is a mature alloy that has been tested for use. Forging of alloys, if the process parameters are not selected or operated properly, its performance will show obvious directionality and may cause notch sensitivity, but as long as the process is strict, this phenomenon will not occur. The expansion coefficient of this alloy is close to that of ferritic heat-strength alloy steel, so that the two materials can be connected without facing special regulations.
Chemical composition of Incoloy 901 (N09901) nickel based alloy: see Table-1:
Table-1 %
|
specification:
Outer diameter Φ6-762mm; wall thickness: 0.5-50mm, maximum length 18000mm
Special specifications are available upon negotiation.
2.
Chemical Composition(%) | |||||||||||
Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu | |
201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | ||
301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | |||
302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | |||
304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | |||
304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | |||
310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | |||
316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | |||
316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | |||
321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | |||
430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | - | ||||
2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | |||
2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | |||
904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | 1.0~2.0 | ||
INCONEL 028 | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | ≤1.4 | ||
MONEL 400 | ≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | ≤34.0 | ||
INCONEL 800 | ≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 | Ti≤0.6 Al≤0.6 |
Packaging Detail | Each tube is loaded into plastic bag individual, and then several pieces were wrapped in one bundle |
Delivery Time | 30 days |