Complaint
Ep100, Ep150, Ep250 Rubber Conveyor Belt
Product Desription
1.Types:EP80-EP630
2.Width:300MM-2300MM
3.Thickness:4-50mm
4.Tensile Strength:6MPA-25MPA
Standards
GB/T7984-2001, GB/T10822-2003, DIN22102, AS1332,JISK6322 etc
Features
Specifications
| Grade | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application |
| Heat Resistance | Mpa | % Minimum | MM3 | Degrees | ||
| HRT1 | 12 | 350% | 200 | SBR Blend | + 100 Max for Fines | For hot materials such as crushed cement, foundry sand, fertilizers, clinker, coke etc. |
| + 125 Max for Lumps | ||||||
| HRT2 | 12 | 350% | 180 | SBR Blend | + 125 Max for Fines | For hot materials upto 150 deg. Centigrade such as crushed cement, foundry sand, fertilizers, clinker, sinter, slack, coke etc. |
| + 150 Max for Lumps | ||||||
| HRT3 | 13 | 350% | 130 | EPDM | + 150 Max for Fines | Very hot & abrasive materials as above upto 200 deg. centigrade |
| + 200 Max for Lumps |
Specifications:
Type | Belt Surface Temperature | Application |
1 | 50C~100C | Suitable for the condition that requires heat resistant, but the materials' temperature is not so high. |
2 | <=125C | Suitable for the condition that requires abrasion resistant, the materials' temperature is proper, or for powdery materials with a not too high temperature. |
3 | <=150C | Suitable for the condition that requires high temperature resistant and high abrasion resistant |
4 | 150~200C | Suitable for the condition that requires high temperature resistant and high abrasion resistant |
| Fabric specs | Ply thickness (mm/P) | N/mm | Cover thickness | |||||
| Strength series | ||||||||
| 2 ply | 3 ply | 4 ply | 5 ply | 6 ply | Upper | Bottom | ||
| EP-80 | 0.8 | 160 | 240 | 320 | 400 | 480 | 2.0~8 | 0~4.5 |
| EP-125 | 0.85 | 250 | 375 | 500 | 625 | 750 | ||
| EP-150 | 0.9 | 300 | 450 | 600 | 750 | 900 | ||
| EP-160 | 0.9 | 320 | 480 | 640 | 800 | 960 | ||
| EP-200 | 1.05 | 400 | 600 | 800 | 1000 | 1200 | ||
| EP-250 | 1.25 | 500 | 750 | 1000 | 1250 | 1500 | ||
| EP-300 | 1.35 | 600 | 900 | 1200 | 1500 | 1800 | ||
| EP-350 | 1.5 | - | 1050 | 1400 | 1750 | 2100 | ||
| EP-400 | 1.8 | - | - | 1600 | 2000 | 2400 | ||
| EP-500 | 2 | - | - | 2000 | 2500 | 3000 | ||
1. Specification
| Belt width (mm) | Sidewall height (mm) | Cleat height (mm) | Effective belt width (mm) |
| 400 | 60 | - | |
| 80 | 70 | ||
| 100 | 90 | ||
| 120 | 100 | ||
| 500 | 60 | 250 | |
| 80 | 70 | ||
| 100 | 90 | ||
| 120 | 110 | ||
| 160 | 140 | ||
| 650 | 60 | 250, 300, 350 | |
| 80 | 70 | ||
| 100 | 90 | ||
| 120 | 110 | ||
| 160 | 140 | ||
| 200 | 180 | ||
| 800 | 60 | 350, 410, 460 | |
| 80 | 70 | ||
| 100 | 90 | ||
| 120 | 110 | ||
| 160 | 140 | ||
| 200 | 180 | ||
| 240 | 220 | ||
| 1000 | 60 | 460, 550, 640, 690, | |
| 80 | 70 | ||
| 100 | 90 | ||
| 120 | 110 | ||
| 160 | 140 | ||
| 200 | 180 | ||
| 240 | 220 | ||
| 300 | 270 | ||
| 1200 | 60 | 460, 550, 640, 690 | |
| 80 | 70 | ||
| 100 | 90 | ||
| 120 | 110 | ||
| 160 | 140 | ||
| 200 | 180 | ||
| 240 | 220 | ||
| 300 | 270 |
Rubber conveyor belt
1.Ply:1-10plies
2.Width:120-2200mm
3.Thickness: 6-40mm
4. Cover Tensile Strength: 9-25MPA
Specifiction/strength:
160N/mm-----3150N/mm
Width:
100mm---2200mm
Ep80 Ep100 Ep125 Ep200 Ep250 Ep300 Ep400 Ep500 Ep600
NN80 NN100 NN125 NN200 NN250 NN300 NN400 NN500 NN600
Advantage:
1. Natural rubber Thin belt body with high strength, light weight.
2. Anti-abrasive, impact resistant, corrosion resistant
3. Softy belt body, good flexibility, excellent trough.
4. Vulcanization molding
5. Long service life
Features
1.Excellent elasticity
2.Anti-impact
3.High-adhesion
4.Good flexibility
5.Trough ability
6.Better stability of size
7.Resistance to water
Application
rubber conveyor belt is widely used in Harbour (port), Metallurgy, Mining, Electricity, Coal, Foundries, Construction, Food, Cement, Fertilizer, Copper, Pig Iron Ores, Sponge Iron Reserves etc.
rubber conveyor belt has over 10 key types according to the use classification:
| Standards | Cover Rubber | Adhesion | |||||
| Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | |||
| DIN 22102 | Mpa | % | mm3 | N/mm | N/mm | ||
| (<=1.5mm) | (>1.5mm) | ||||||
| DIN 22102-Z | 15 | 350 | 250 | 3.5 | 4.5 | ||
| DIN 22102-W | 18 | 400 | 90 | 3.5 | 4.5 | ||
| DIN 22102-Y | 20 | 400 | 150 | 3.5 | 4.5 | ||
| DIN 22102-X | 25 | 450 | 120 | 3.5 | 4.5 | ||
| Standards | Cover Rubber | Adhesion | |||||
| Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | ||
| AS 1332 | Mpa | % | mm3 | N/mm | N/mm | N/mm | |
| (<=1.9mm) | (>1.9mm) | ||||||
| AS 1332-N17 | 17 | 400 | 200 | 4 | 4.8 | 6 | |
| AS 1332-M24 | 24 | 450 | 125 | 4 | 4.8 | 6 | |
| Standards | Cover Rubber | Adhesion | |||||
| Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | ||
| RMA | Mpa | % | mm3 | N/mm | N/mm | N/mm | |
| (<=1.6mm) | (>1.6mm) | ||||||
| RMA-I | 17 | 400 | 3 | 4.4 | 4 | ||
| RMA-II | 14 | 400 | 3 | 4.4 | 4 | ||
| Standards | Cover Rubber | Adhesion | |||||
| Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | ||
| SANS 1173 | Mpa | % | mm3 | N/mm | N/mm | ||
| A | 18 | 400 | 70 | 5 | 7 | ||
| C | 20 | 400 | 150 | 5 | 7 | ||
| M | 25 | 450 | 120 | 5 | 7 | ||
| N | 17 | 400 | 150 | 5 | 7 | ||
Application
