Bridge Beam Stainless Plated Micro Copper Steel Fiber

Min.Order: 1
Product origin: Shanghai, China
Infringement complaint: complaintComplaint
US$ 900 ~ 1100

Description
Hooked End Steel Fibre
(Loose / Glued)
Description
Hooked end steel fibre is made of cold-drawn wire. In the concrete mixture, add right amount steel fibres can be mixed into a kind of special jetting as well as casting concrete, namely steel fibre reinforced concrete. Compared with general concrete, steel fibre concrete has a great improvement in tensile strength, flexural strength, abrasion resistance, impact resistance, fatigue resistance, toughness, crack resistance and antiknock performance.

Application
  • Mortar reinforcement
  • Ground, bridge, highway pavements dam
  • Railway sleeper
  • Shotcrete, tunnel and mine
Benefits
  • Improve structural strength
  • Reduce steel reinforcement requirements
  • Reduce crack widths and control the crack widths tightly, thus improving durability
  • Improve impact- and abrasion-resistance
  • Improve freeze-thaw resistance
Technical Information
Product-codeL(mm)D(mm)Tensile strength(MPa)Aspect ratio
SAP 6560 GHW600.9115067
SAP 8060 GHW600.75115080
SAP 6535 GHW350.55115064
Othercustomizablecustomizablecustomizablecustomizable

Guideline for use
  1. Dosage: depend on the application and minimum dosage range is 20kg/m3-70kg/m3.
  2. Mixing: put sand and stones into the hopper. While turning the sand and stones into the hopper, mix the proper amount of loose steel fiber, and then add the cement.Hang the sand, stones, steel fibers, and cement from the hopper into the mixing table and dry mix for 2 minutes, then add water to mix for 2 minutes. Glued steel fiber should be added after water mixed to dissolving glue.
  3. Put the evenly mixed fiber concrete into the carriage and transport it.
  4. The concrete pouring and laying should be tamped and compacted.
Packing
25kg/Bag, 1200kg/Pallet, 24 T/ 20' Container. Other packing way according to customer's requirements.



Shotcrete with easy-mix Steel Fibre


Q: Can I have a sample order?      
A: Yes,and we can provide 1kg free sample for customer.

Q: How do you ship the samples and how long does it take arrive?        
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes around one week.

Q:  Can I visit your factory?        
A: Yes,welcome.

Q: Can you accept mixed batch of different products?          
A: Yes, we are support different product mix wholesale, please communicate with us your detail demands
.

Q: How long is your lead time?
A: Normally lead time is
5-10 days. It is depend on the quantity and request, please communicate with us your detail demands.
Product Tag:
Related categories:
Scroll to Top