Manufacturers Supply Stainless Steel Fiber

Min.Order: 1

Product origin: Shanghai, China

Infringement complaint:

Complaint

US$ 900 ~ 1100

Description

Hooked End Steel Fibre
(Loose / Glued)

Description
Hooked end steel fibre is made of cold-drawn wire. In the concrete mixture, add right amount steel fibres can be mixed into a kind of special jetting as well as casting concrete, namely steel fibre reinforced concrete. Compared with general concrete, steel fibre concrete has a great improvement in tensile strength, flexural strength, abrasion resistance, impact resistance, fatigue resistance, toughness, crack resistance and antiknock performance.

Application

Mortar reinforcement
Ground, bridge, highway pavements dam
Railway sleeper
Shotcrete, tunnel and mine

Benefits

Improve structural strength
Reduce steel reinforcement requirements
Reduce crack widths and control the crack widths tightly, thus improving durability
Improve impact- and abrasion-resistance
Improve freeze-thaw resistance

Technical Information

Product-code	L(mm)	D(mm)	Tensile strength(MPa)	Aspect ratio
SAP 6560 GHW	60	0.9	≥1150	67
SAP 8060 GHW	60	0.75	≥1150	80
SAP 6535 GHW	35	0.55	≥1150	64
Other	customizable	customizable	customizable	customizable

Guideline for use

Dosage: depend on the application and minimum dosage range is 20kg/m³-70kg/m³.
Mixing: put sand and stones into the hopper. While turning the sand and stones into the hopper, mix the proper amount of loose steel fiber, and then add the cement.Hang the sand, stones, steel fibers, and cement from the hopper into the mixing table and dry mix for 2 minutes, then add water to mix for 2 minutes. Glued steel fiber should be added after water mixed to dissolving glue.
Put the evenly mixed fiber concrete into the carriage and transport it.
The concrete pouring and laying should be tamped and compacted.

Packing
25kg/Bag, 1200kg/Pallet, 24 T/ 20' Container. Other packing way according to customer's requirements.

Shotcrete with easy-mix Steel Fibre

Q: Can I have a sample order?
A: Yes,and we can provide 1kg free sample for customer.

Q: How do you ship the samples and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes around one week.

Q: Can I visit your factory?
A: Yes,welcome.

Q: Can you accept mixed batch of different products?
A: Yes, we are support different product mix wholesale, please communicate with us your detail demands.

Q: How long is your lead time?
A: Normally lead time is 5-10 days. It is depend on the quantity and request, please communicate with us your detail demands.

Forward

Related products