This product has good explosion-proof function, suitable for IIA, IIB, IIC explosive gas environment and various flammable and explosive places.
1. Adopt imported LED light source, the average service life is up to 100,000 hours, the power supply adopts wide voltage processing, which can realize constant current output and has short circuit and over voltage protection, greatly improves the service life of the lamp.
2. The radiator adopts polymer nano-materials, which is benefi-cial to heat radiation. The independent upper and lower ventilation convection outer circumferential array heat sink structure design greatly avoids the phenomenon that the conventional LED heat sink will accumulate dust, so that the heat of the light source surface is quickly exported, so that the temperature rise of the LED chip and the power supply could be controlled within a reasonable range, which greatly guarantee the service life of the chip and power supply.
3. The light projection is even and soft, especially suitable for various low-top, platform, high-top, high- shed and other places as fixed lighting.
4. The protection level of the lamp body is IP66, the anti-corrosion grade can reach WF2, and the surface of the lamp body won't corrode nor rust for a long time.
5. Various installation methods such as ceiling type, curved rod type, flange type, U-bracket(adjustable angles) are available.
6. The anti-glare tempered glass makes the light moving line free from shadows and stabs. (Transparent and matte two options) light transmittance of up to 95% -98%.
Output | 100-150w |
Light effect | 120-200Lm/w |
Voltage | AC100-240V 50/60Hz |
Size | 325x354mm |
Weight | 7.6kg |
Life Hour | 100000HRS |
Protection level | IP66 |
Anticorrosion grade | WF2 |
Explosion proof mark | ExdIICT6 Gb/ExtD A21 T80ºC |
Color Rendering | ≥75Ra |
Beam Angle | 120° |
Schematic diagram
1.Before installation, it is necessary to check whether the actual operating conditions are in conformity with the parameters listed on the lamp nameplate.
2.Before installation, please test the lighting according to the parameters of the lamp nameplate to ensure that there is no quality problem before installation.
3.Before installation, it is necessary to determine the installation location and mode of the lamps according to the installation mode provided by the product, in combination with the on-site use environment and lighting requirements, so as to ensure that the installation is firm and reliable.
4.Connect the prepared cables with the input cables of lamps and lanterns according to the corresponding fire (brown), zero (blue) and ground (yellow-green) wires, so as to ensure that the connection is firm, and make good insulation and waterproof measures at the connection.
5.The input end of the cable can be connected to the power supply of the corresponding voltage to illuminate.
Using The Matters Needing Attention
1. This product is an explosion-proof product and can be used in explosion-proof places.
2. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.
3. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.
4. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.
5. The luminaire must be reliably grounded
Quality Assurance
The company has passed ISO9001:2008 international quality system audit certification, this product strictly implements ISO9001 international quality management system standard production, to ensure that the product quality fully meets national standards and design requirements.