Commercial Widely Used Temperature Control Unit Mold Oil

Min.Order: 1

Product origin: Ningbo, Zhejiang, China

Infringement complaint:

Complaint

US$ 650 ~ 1200

Description

XCM-AUTOMATIC MOLD TEMPERATURE CONTROL

Unstable temperature in the process of mold forming always tends to produce unqualified products. According to the principle of heat exchange, XCM mold temperature controls make use of water and high property heat transferring oil as a medium to keep a proper stable temperature in the process of mold forming so as to guarantee high quality of products and raise the productive efficiency.

Features:
·Hot medium liquid : water or oil convertibly
Either water or oil can be used as a hot medium liquid according to the needs of mold forming temperature. It's high selectivity is certain to bring in high economic efficiency.
·Vertical pump
The flow of vertical pump can be always kept steady and its service life keeps long.
·Stainless medium tank
This interior tank will not get rust for long term, which is sure to prevent from any blockade of pipes and keep long-term service of pump.
·Transparent water (oil) level viewer
The transparent water (oil) level viewer can easily be used to view and inspect the quantity of medium liquid and be reminded to refill the medium liquid from time to time.
·Automatic alarming device
While water (oil) shortage occurs in the container, this device will automatically light up and start alarming and cut off the electric power of heaters and pumps, thus to guarantee their safety.
·High-precision automatic temperature control
The measure of temperature is very sensitive and accurate, little change of temperature helps to keep products both fine and delicate.
·Minimize products wastage
The mold can reach the required temperature right at the beginning of operation, thus can obviously minimize products shortage.
·Maintain proper temperature.
Either in continuous operation or in temporary shutting down, mold-forming temperature can always be kept proper to guarantee the best quality of products and further improve the forming process.
·Compact in size, light in weight
Easy to install, convenient to operate, convenient to move and little room to occupy.

Main Technical Data

Model	Temperature	Heat capacity	Pump power	Pump volume	Pump pressure	Mold Connecting	External size	Weight
Model	ºC	KW	KW	L/min	m	″	L×W×H (mm)	Kg
XCM-6-W	Water 95ºC (120ºC)	6	0.37	40	30	3/8"2×2	580×350×780	62
XCM-9-W		9	0.75	135	25	3/8"4×2	680×350×780	90
XCM-12-W		12	0.75	135	25	3/8"4×2	680×350×780	110
XCM-6-O	Oil 170ºC (200ºC)	6	0.37	40	30	3/8"2×2	580×350×780	75
XCM-9-O		9	0.75	135	25	3/8"4×2	680×350×780	100
XCM-12-O		12	0.75	135	25	3/8"4×2	680×350×780	125

Q: About your factory ?

A: Our engineers have 20 years of industry experience , committed to injection molding peripheral and refrigeration industry automatic integration of Equipment Research and development .