Complaint
Feldspar Powder Rotary Dryer Introduction
Feldspar is usually purified before put into use.
The FWLDSPAR PURIFICATION is divided into 7 steps:
Crushing-Slurry washing-Classifying-Drying-Iron separating-Purification-Screening.
For the drying process, the professional feldspar powder rotary dryer is the best choice.
Feldspar Powder Rotary Dryer Working Principle
Feldspar powder rotary dryer uses 3-pass rotary drum dryer. Internal cylinder, middle cylinder and outer cylinder form a since the insulation structure. Special thermal design reduces wind tunnel heat loss and increase the heat exchange area, having a good energy saving effect. The feldspar powder slurry is fed into the inner layer by the feeding device to achieve downstream drying. Under the lifting board and hot air flow, the material moves to the other end of the inner layer, and enters into the middle layer, begin upstream drying with the induced fan, then the material goes to the other end of the middle layer and falls into the outer layer. When the material that achieves the drying effect quickly moves out of the drum under the action of hot air.
Feldspar Powder Rotary Dryer Advantages
1.Thermal efficiency is as high as 80% (single cylinder dryer is only 35 percent).
2.Reduces workshop covered area, saves the project investment by about 40%.
3.The system is equipped with PLC control system and video monitoring system, with a high degree of automation and simple operation.
4.The hot flue gas directly contacts with the materials, sufficient heat exchange and high production capacity.
5.Low investment, low operating cost and and short investment recovery time.
| Model | DDHG1208 | DDHG1408 | DDHG1610 | DDHG2010/3 | DDHG2210/3 | DDHG2510/3 | DDHG2512/3 | DDHG2912/3 |
| Input Capacity(t/d) | 43.7 | 52.5 | 75.8 | 169 | 186.5 | 215.5 | 262.2 | 317.6 |
| Output Capacity(t/d) | 25.7 | 30.9 | 44.6 | 99.4 | 109.7 | 126.7 | 154.2 | 186.8 |
| Vaporization(t/h) | 0.75 | 0.9 | 1.3 | 2.9 | 3.2 | 3.7 | 4.5 | 5.45 |
| Early moisture(%) | 35-50% | |||||||
| Final moisture(%) | 12-15%(adjustable) | |||||||
| Drying temperature | 350-550ºC | |||||||
| Total motor power(kw) | 32 | 40 | 55 | 95 | 100 | 125 | 145 | 165 |
| Total weight(kg) | 15000 | 17000 | 21500 | 26500 | 28500 | 37000 | 41000 | 45500 |
| Plant area(m) | 5m*14m | 5m*14m | 6m*16m | 8m*16m | 8m*16m | 10m*16m | 10m*18m | 10m*20m |
| Except above models, we also can supply special model according to your requirements. | ||||||||
Zhengzhou Dongding Machinery Co., Ltd. is a high-tech enterprise integrating R&D design, production installation, production management, sales, after-sales service and technical consultation.
We have core technology system, which integrates the thermal combustion, dehydration, drying, molding, separation and dust removal. Scientific equipment selection and technical process optimization are adopted according to different material characteristics. Currently our equipment has been successfully applied in the coal, feed, biomass fuel, organic fertilizer processing industries. Especially the coal dryers like lignite coal dryer, coal ash dryer, raw coal rotary dryer, coal slime dryer, etc. are well received by the customers at home and abroad.
At present, our products have been recognized by customers in China and all over the world, and successfully exported to Indonesia, South Africa, Vietnam, Thailand, Myanmar, India, Egypt and other countries and regions.
