Good Quality Motorcycle Helmet Outdoor Safety Scooter Motorcycle Helmets

Batteries contain sulfuric acid and produce explosive mixtures of hydrogen and oxygen.Because self-discharge action generates hydrogen gas even when the battery is not in operation,make sure batteries are stored and worked on i a well-ventilated area.Always wear safety glasses and a face shield when working on or near batteries. When work- ing with batteries:
* Always wear proper eye, face, and hand protection. 
* Keep all sparks, flames, and cigarettes away from the battery. 
* Do not remove or damage vent caps. 
* Make sure work area is well ventilated.
* Never lean over battery while boosting, testing, or charging.

SAFE BATTERY INSTALLATION
To assure safe installation and proper operation,follow these installation procedures:
* Disconnect ground cable first (this is usually he negative cable;however, older vehicles may have a positive ground).
* Remove battery - note position of positive(+) and negative(-)terminals.Mark the cables for correct connection to replacement battery.
* Clean terminals and cable connections with a wire brush.Broken connections and frayed or cut cables should be replaced.
* Install the replacement battery in the same position as the old one. Secure battery with the holddown assembly.
* Make sure the terminals do not touch any metal mounting, engine, or body parts.
* Connect cables tightly. Connect ground cable last to avoid sparks.