Item | Uint | Specification |
Power(hp) | / | 50 |
Model | / | 504-1, wheel tractor |
Type | / | Wheel type |
Frame type | / | Safety shelf |
Driving type | / | 4WD |
Application | / | General use |
External dimension (L × W × H) | mm | 3595×1500×2330(Safety shelf top) |
wheel base | mm | 1970 |
Commonly used wheel tread(front/rear) or gauge | mm | 1210/1180 |
wheel tread(front/rear) or gauge | mm | 1210,1310/1105-1430 |
Minimum ground clearance and position | mm | 315(bottom of traction plate) |
Minimum weight | kg | 1800 |
Standard Counterweight (Front/Rear) | kg | 96/50 |
Minimum service ratio | kg/kW | 48.91 |
Number of gears (forward/backward) | / | 8/2 |
Number of main gears | / | 4+1 |
Number of range shift | / | 2 |
Maximum theoretical design speed | km/h | 31.9 |
Connection mode between engine and main clutch | / | Direct connection |
Type of roll protection device (cab or safety frame)type | / | Safety frame |
Engine | / | YUNNEI |
Engine structure | / | Inline, water-cooled, four-stroke |
Engine intake mode | / | naturally aspirated |
Number of engine cylinders | / | 4 |
Engine nominal power | kW | 36.8 |
Net power rating of engine | kW | 36.8 |
Engine calibration speed | r/min | 2400 |
Engine cooling mode | / | water cooling |
Air filter type | / | wet-type |
Steering system type | / | Full hydraulic steering |
Steering system steering control mechanism | / | steering control |
Steering system type of steering mechanism | / | Front wheel steering |
Tyre Model (Front/Rear) | / | 7.50-16/12.4-28 |
Hydraulic suspension system type | / | separate |
Type of suspension | / | Three-point rear suspension |
Number of hydraulic output groups | / | 1 |
Full opening pressure of the safety valve of the working device | Mpa | 16±0.5 |
Number of splines of power take-off shaft | / | 6 |
Standard speed of power output shaft | r/min | 540/720 |