Two or Three Zones Double Duty Thermal Shock Environmental Test Chambers

Min.Order: 1

Product origin: Dongguan, Guangdong, China

Infringement complaint:

Complaint

US$ 10000 ~ 100000

Description

Two or Three Zones Double Duty Thermal Shock Environmental Test Chambers

Horizontal Thermal Shock Chambers
Thermally Shock twice as much product in one chamber
Our horizontal thermal shock chambers are the ideal choice for batch testing and larger test loads. Chambers are designed to perform tailored environmental stress screening of component and board level electronic assemblies. The carrier basket transfers the load between the hot and cold zones in a two or three zone configuration. In the horizontal three zone, the products travel via a carrier basket between the cold and ambient zones, and the hot zone travels to envelop the carrier basket.

Double duty thermal shock chambers (DTS) consist of three zones: a hot chamber on each end with a cold chamber in the middle. This design allows product to be moved between the zones simultaneously with two product baskets - exposing twice as much product in one system to maximize your investment.

These chambers may be specially designed to meet the unique requirements of the following specifications: JESD22-A104 | MIL-STD 883, Methods 1010.5 and 1010.7 | MIL-STD 202, Method 107G | MIL-STD 810, Method 503.2.

GB-2423.1-2008(IEC68-2-1)	Test A: Low Temperature Test
GB-2423.2-2008(IEC68-2-2)	Test B: High Temperature Test
GJBl50.3-2009(MIL-STD-810D)	High Temperature Test
GJBl50.4-2009(MIL-STD-810D)	Low Temperature Test
GJBl50.5-2009	Temperature shock test method

Model		TST Series(2-Zone)
		64A/B/D	70A/B/D	100A/B/D	150A/B/D	300A/B/D	500A/B/D
Volume(L)		64L	70L	100L	150L	300L	500L
Basket size	W(mm)	400	500	500	670	850	900
	H(mm)	400	350	400	460	550	700
	D(mm)	400	400	500	490	640	800
Exterior size	W(mm)	860	1500	950	1520	1940	2025
	H(mm)	2010	1970	2040	1940	2260	2685
	D(mm)	2200	1900	2030	2530	2735	2740
Test weight(KG)		3.5	4	5	7	15	20
High Temp.Chamber		+60ºC~+200ºC
Pre-heating time		from normal temperature RT ~ +200ºC, Within 30 min
Low Temp.Chamber		(A)0ºC~ -40ºC (B)0ºC~ -55ºC (D)0ºC~-65ºC
Pre-cooling time		from normal temperature RT ~ -70° C Within 60 min
Temp.Shock Range		(A) -40ºC~+150ºC (B) -55ºC~+150ºC (D)-65ºC~+150ºC
Temperature uniformity		<=±2.0ºC
Temperature fluctuation		<=±0.5ºC
Temperature deviation		±2.0ºC
Transfer time		<=10s
Recovery time		<=5min
Noise		<=75dB
Interior material		Stainless steel plate(SUS 304)
Exterior material		Baked painting steel or stainless steel(SUS304)
Insulation material		Rigid polyurethane Foam + glass fiber wool
Refrigeration system		Water Cooled
		Semi-hermetic compressor, cascade refrigeration system,Eco-friendly refrigerant
Controller		Panel:7-inch LCD Touch screen, Chinese / English display for option
		Operation model: Program or fix point running
		Memory capacity:120programs,1200steps, all repeat 999cycles, part repeat 99 cycles.
		Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit
		Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV
Ambient Temp.		1.Ambient temperature: 5ºC-35ºC 2.Relative humidity: <=85%R.H 3.Atmospheric pressure:80kPa~106kPa 4.Flat, vibration-free ground;
Safety device		NFB(No fuse breaker), over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection
Standard accessory		Cable port(portΦ50mm)1, shelves2
Power		AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available

Pre-sale Service:

Provide test solution
Send specification and quotation

In-sale Service:

Design
Production
Calibration
Installation
Training
Preventative maintenance

After-sale Service:

24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair

Q:Are your company a trading one or a factory?

A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.

Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.

Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.

Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.

Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our
production lead time depends on specific items and item quantities.

Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.

Q:What about the product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.

Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.

Forward

Related products