5ton Tension and Compression Load Cell Price Torque Sensor

Min.Order: 10

Product origin: Bengbu, Anhui, China

Infringement complaint:

Complaint

US$ 10 ~ 15

Description

Strain gauges are mounted on the torsion shaft of the sensor element, itself made of steel, connected to form a full bridge. The electrical power excitation for the wire strain
gauge full bridge and the transmission of the measured signal is provided through a high-quality slip-ring system between the stator and the rotor

Precise, reliable measurements of both static and dynamic torques in either direction can be made with this range of sensors.

This opens a wide range of possible applications to the user. These torque sensors are standard equipment in a wide range of industrial automation, quality control and automotive components industry applications, as well as in laboratories.

characteristic

Measuring ranges between 0 ... ± 1 Nm and 0 ... 1000 Nm

Excellent reproducibility

Standardized output signal makes exchange easy

Optionally available with factory calibration certificate

Designed for clockwise and counterclockwise torque

Optionally available with integrated angle measurement

Rotation speed up to 3000 min-1/min (short-term)

Dimensions

Specification

Type	Technical parameters
Nominal load range	1Nm-1000Nm
Power supply	2-12VDC
Drawing current	<100 mA
Zero balance	1.0±% of rated output
Analog output	2.0±0.005mV/V
Input resistance(Rlc)	380±20Ω(ohms)
Output resistance(Ro)	350±5Ω(ohms)
Insulation resistance	≥2000 MΩ(Mege-Ohms)
Class precision	0.05%FS
Effect of temperature	0.03%FS/10ºC
Operating temperature	+10~+65ºC
Safe Load Limit	150% FS
Safety margin against breakage	200% FS
Material material	(15%) High performance alloy steel or (chromium ratio>15% stainless steel)
Protection type	IP50