Complaint
| Compression Ratio: 17.3:1 Aspiration: Turbocharged Bore: 102 mm Displacement: 5.9 L Storke: 120 mm No. of Cylinders: 6 Governor Regulation: ≤3% Fuel System: FR92632: BYC A/GAC 24V FR93146: BYC A/GAC 12V FR92650: BYC A/SEGMA |
| Engine Performance Data @ 1500 RPM Litre/hour |
GENERAL ENGINE DATA
Approximate Engine Weight (wet)..............................-kg
Mass Moment of Inertia of Rotating Components (No Flywheel).........…-kg·m2
Center of Gravity from Rear Face of Block........................-mm
Center of Gravity above Crankshaft Centerline.....................-mm
Crankshaft Thrust Bearing Load Limit
-Maximum Intermittent..............................…-N 3425
-Maximum Continuous..............................…-N 1112
Maximum (Static) Bending Moment at Front Support Mounting Surface......-N.m 435
Maximum (Static) Bending Moment at Side Pad Mounting Surface.........-N.m TBD
Maximum (Static) Bending Moment at Rear Face of Block............…-N.m 1356
Moment of Inertia of Complete Engine
- Roll Axis.......................................…-kg·m2 16.5
- Pitch Axis.......................................-kg·m2 41.1
- Yaw Axis....................................... -kg·m2 35.4
Maximum Back Pressure....................................-kPa
Exhaust Pipe Size Normally Acceptable........................…-mm
Maximum Static Supported Weight at the Turbocharger Outlet Flange......-N.m
Exhaust Manifold Insulation Acceptable........................… -Yes/No
Turbocharger Insulation Acceptable...........................…-Yes/No
- Dirty Element...…................................…-kPa
- Clean Element...…................….............… -kPa
Minimum Dirt Holding Capacity with Heavy Duty Air Cleaner............-g/cfm
Maximum Temperature Rise from Ambient to the Inlet of the Turbocharger...-ºC
Recommended intake piping size (inner diameter)................... -mm
LUBRICATION SYSTEM
-Idle Speed....................................…-kPa 207
-Governed Speed.................................-kPa 345
Maximum Oil Temperature...................................-ºC 121
Oil Capacity with OP 9006 Oil Pan : High - Low.........…..............-litre 14.2 - 12.3
Minimum Required Lube System Capacity - Sump plus Filters..........…-litre 16.4
- Front Down.......................................- º 40
- Front Up.......................................…- º 40
- Side to Side.......................................- º 40
FUEL SYSTEM
Type Injection System..........................................… BYC A Direct Injection
Maximum Restriction at Lift Pump...…...........................-mmHg 102
Maximum Allowable Head on Injector Return Line (Consisting of Friction Head and Static Head)
.......................................…-mmHg 508
Total Drain Flow (constant for all loads)..........................…-litre/hr 30
COOLING SYSTEM
Coolant Capacity - Engine Only..............................…-litre 7.9
Maximum Coolant Friction Head External to Engine…-1800 rpm......... -kPa 35
-1500 rpm......... -kPa 28
Maximum Static Head of Coolant Above Engine Crank Centerline......….…-m 14
Standard Thermostat (Modulating) Range..................…....…-ºC 82 - 95
Minimum Pressure Cap.................................... -kPa 69
Maximum Top Tank Temperature for Standby / Prime Power......…........-ºC 104 / 100
| ELECTRICAL SYSTEM Cranking Motor (Heavy Duty, Positive Engagement)….........-volt 12V 24V Battery Charging System, Negative Ground......….........…-ampere 63 40 Maximum Allowable Resistance of Cranking Circuit............ -ohm 0.00075 0.002 Minimum Recommended Battery Capacity • Cold Soak @ 10 °F (-12 °C) and Above...............…-0°F CCA 800 400 |
| 230/400V, 50Hz, 0.8PF, 3P4W | DCEC Cummins Engine Specification | Alternator | Open Type | Silent Type | |||||||||||||||||
| Genset Model | Standby Power | Prime Power | Model | Cylinder | Bore | Stroke | Dspl | Exhaust Temp | Lub-oil | Coolant | Max Power | Speed Gov | Fuel Csm. | Brand&Model | Dimension (mm) | Weight (kgs) | Dimension (mm) | Weight (kgs) | |||
| kVA | kW | kVA | kW | mm | mm | L | ºC | L | L | kW | L/H | Stamford | Leroy-Somer | ||||||||
| VG-C22 | 22 | 17.6 | 20 | 16 | 4B3.9-G11 | 4L | 102 | 120 | 3.9 | 410 | 10.9 | 7.2 | 22 | Elec | 6.1 | PI144D | TAL-A40-F | 1750*980*1500 | 810 | 2240*1090*1685 | 1300 |
| VG-C27.5A | 27.5 | 22 | 25 | 20 | 4B3.9-G12 | 4L | 102 | 120 | 3.9 | 420 | 10.9 | 7.2 | 30 | Elec | 8.0 | PI144E | TAL-A40-G | 1750*980*1500 | 810 | 2240*1090*1685 | 1300 |
| VG-C27.5B | 27.5 | 22 | 25 | 20 | 4B3.9-G1 | 4L | 102 | 120 | 3.9 | 410 | 10.9 | 7.2 | 27 | Mech | 8.0 | PI144E | TAL-A40-G | 1750*980*1500 | 840 | 2240*1090*1685 | 1350 |
| VG-C27.5C | 27.5 | 22 | 25 | 20 | 4B3.9-G2 | 4L | 102 | 120 | 3.9 | 410 | 10.9 | 7.2 | 27 | Elec | 7.5 | PI144E | TAL-A40-G | 1750*980*1500 | 860 | 2240*1090*1685 | 1370 |
| VG-C30A | 30 | 24 | 27.5 | 22 | 4B3.9-G12 | 4L | 102 | 120 | 3.9 | 420 | 10.9 | 7.2 | 30 | Elec | 8.0 | PI144F | TAL-A42-C | 1750*980*1500 | 810 | 2240*1090*1685 | 1300 |
| VG-C30B | 30 | 24 | 25 | 20 | 4B3.9-G1 | 4L | 102 | 120 | 3.9 | 410 | 10.9 | 7.2 | 27 | Mech | 8.0 | PI144F | TAL-A42-C | 1750*980*1500 | 840 | 2240*1090*1685 | 1350 |
| VG-C30C | 30 | 24 | 25 | 20 | 4B3.9-G2 | 4L | 102 | 120 | 3.9 | 410 | 10.9 | 7.2 | 27 | Elec | 7.5 | PI144F | TAL-A42-C | 1750*980*1500 | 860 | 2240*1090*1685 | 1370 |
| VG-C33 | 33 | 26.4 | 30 | 24 | 4B3.9-G12 | 4L | 102 | 120 | 3.9 | 420 | 10.9 | 7.2 | 30 | Elec | 8.0 | PI144G | TAL-A42-C | 1750*980*1500 | 810 | 2240*1090*1685 | 1300 |
| VG-C44A | 44 | 35 | 40 | 32 | 4BT3.9-G1 | 4L | 102 | 120 | 3.9 | 487 | 10.9 | 7.2 | 40 | Mech | 9.5 | PI144J | TAL-A42-F | 1750*980*1500 | 950 | 2240*1090*1685 | 1460 |
| VG-C44B | 44 | 35 | 40 | 32 | 4BT3.9-G2 | 4L | 102 | 120 | 3.9 | 487 | 10.9 | 7.2 | 40 | Elec | 9.5 | PI144J | TAL-A42-F | 1750*980*1500 | 970 | 2240*1090*1685 | 1480 |
| VG-C55 | 55 | 44 | 50 | 40 | 4BTA3.9-G2 | 4L | 102 | 120 | 3.9 | 485 | 10.9 | 7.9 | 55 | Elec | 11.9 | UCI224D | TAL-A42-G | 1850*980*1500 | 990 | 2650*1090*1785 | 1550 |
| VG-C62.5 | 62.5 | 50 | 56.3 | 45 | 4BTA3.9-G2 | 4L | 102 | 120 | 3.9 | 548 | 10.9 | 8.3 | 55 | Elec | 14.1 | UCI224E | TAL-A42-H | 1850*980*1500 | 990 | 2650*1090*1785 | 1550 |
| VG-C66A | 66 | 53 | 60 | 48 | 4BTA3.9-G2 | 4L | 102 | 120 | 3.9 | 548 | 10.9 | 7.9 | 64 | Elec | 14.3 | UCI224E | TAL-A42-H | 1850*980*1500 | 990 | 2650*1090*1785 | 1580 |
| VG-C66B | 66 | 53 | 60 | 48 | 4BTA3.9G-11 | 4L | 102 | 120 | 3.9 | 548 | 10.9 | 8.3 | 64 | Elec | 14.3 | UCI224E | TAL-A42-H | 1920*920*1500 | 945 | 2650*1090*1785 | 1580 |
| VG-C80 | 80 | 64 | 72.5 | 58 | 4BTA3.9G-11 | 4L | 102 | 120 | 3.9 | 548 | 10.9 | 8.3 | 80 | Elec | 20.0 | UCI224F | TAL-A44-C | 1920*920*1500 | 950 | 2650*1090*1785 | 1610 |
| VG-C88 | 88 | 70.4 | 80 | 64 | 4BTA3.9G-11 | 4L | 102 | 120 | 3.9 | 548 | 10.9 | 8.3 | 80 | Elec | 20.0 | UCI224G | TAL-A44-C | 1920*920*1500 | 950 | 2650*1090*1785 | 1610 |
| VG-C94A | 94 | 75 | 85 | 68 | 6BT5.9-G1 | 6L | 102 | 120 | 5.9 | 510 | 16.4 | 7.9 | 92 | Mech | 23.0 | UCI224G | TAL-A44-C | 2250*980*1500 | 1200 | 3150*1090*1835 | 1820 |
| VG-C94B | 94 | 75 | 85 | 68 | 6BT5.9-G2 | 6L | 102 | 120 | 5.9 | 565 | 16.4 | 7.9 | 92 | Elec | 23.6 | UCI224G | TAL-A44-C | 2250*980*1500 | 1230 | 3150*1090*1835 | 1850 |
| VG-C100 | 100 | 80 | 90 | 72 | 6BT5.9-G1 | 6L | 102 | 120 | 5.9 | 510 | 16.4 | 7.9 | 92 | Mech | 23.4 | UCI274C | TAL-A44-D | 2250*980*1500 | 1200 | 3150*1090*1835 | 1820 |
| VG-C110A | 110 | 88 | 100 | 80 | 6BT5.9-G1 | 6L | 102 | 120 | 5.9 | 510 | 16.4 | 7.9 | 92 | Mech | 23.4 | UCI274C | TAL-A44-D | 2250*980*1500 | 1230 | 3150*1090*1835 | 1850 |
| VG-C110B | 110 | 88 | 100 | 80 | 6BT5.9-G2 | 6L | 102 | 120 | 5.9 | 565 | 16.4 | 7.9 | 92 | Elec | 23.6 | UCI274C | TAL-A44-D | 2250*980*1500 | 1230 | 3150*1090*1835 | 1850 |
| VG-C125 | 125 | 100 | 113 | 90 | 6BTA5.9-G2 | 6L | 102 | 120 | 5.9 | 570 | 16.4 | 9.9 | 116 | Elec | 27.1 | UCI274D | TAL-A44-E | 2320*980*1550 | 1310 | 3300*1090*1835 | 1970 |
| VG-C138 | 138 | 110.4 | 125 | 100 | 6BTAA5.9-G2 | 6L | 102 | 120 | 5.9 | 495 | 16.4 | 9.9 | 130 | Elec | 29.9 | UCI274ES | TAL-A44-E | 2320*980*1550 | 1310 | 3300*1090*1835 | 1970 |
| VG-C150 | 150 | 120 | 137.5 | 110 | 6BTAA5.9-G2 | 6L | 102 | 120 | 5.9 | 495 | 16.4 | 9.9 | 130 | Elec | 32.5 | UCI274E | TAL-A44-H | 2320*980*1550 | 1330 | 3300*1090*1835 | 1990 |
| VG-C165 | 165 | 132 | 150 | 120 | 6BTAA5.9-G12 | 6L | 102 | 120 | 5.9 | 507 | 16.4 | 9.9 | 155 | Elec | 35.7 | UCI274F | TAL-A44-J | 2320*980*1550 | 1350 | 3300*1090*1835 | 2010 |
| VG-C175A | 176 | 141 | 160 | 128 | 6CTA8.3-G1 | 6L | 114 | 135 | 8.3 | 540 | 27.6 | 12.3 | 180 | Mech | 38.2 | UCI274F | TAL-A44-K | 2450*980*1710 | 1750 | 3600*1100*1975 | 2480 |
| VG-C175B | 176 | 141 | 160 | 128 | 6CTA8.3-G2 | 6L | 114 | 135 | 8.3 | 563 | 23.8 | 12.3 | 180 | Elec | 38.2 | UCI274F | TAL-A44-K | 2450*980*1710 | 1780 | 3600*1100*1975 | 2510 |
| VG-C200A | 200 | 160 | 180 | 144 | 6CTA8.3-G1 | 6L | 114 | 135 | 8.3 | 540 | 27.6 | 12.3 | 180 | Mech | 43.3 | UCI274G | TAL-A44-L | 2450*980*1710 | 1820 | 3600*1100*1975 | 2550 |
| VG-C200B | 200 | 160 | 180 | 144 | 6CTA8.3-G2 | 6L | 114 | 135 | 8.3 | 563 | 23.8 | 12.3 | 180 | Elec | 43.3 | UCI274G | TAL-A44-L | 2450*980*1710 | 1850 | 3600*1100*1975 | 2580 |
| VG-C220 | 220 | 176 | 200 | 160 | 6CTAA8.3-G2 | 6L | 114 | 135 | 8.3 | 545 | 23.8 | 12.3 | 203 | Elec | 47.6 | UCI274H | TAL-A44-M | 2550*980*1760 | 1900 | 3600*1100*1975 | 2630 |
| VG-C250A | 250 | 200 | 225 | 180 | 6LTAA8.9-G2 | 6L | 114 | 135 | 8.9 | 470 | 27.6 | 11.1 | 240 | Elec | 58.0 | UCDI274J | TAL-A46-C | 2570*1160*1680 | 2050 | 3850*1310*2117 | 2880 |
| VG-C275A | 275 | 220 | 250 | 200 | 6LTAA8.9-G3 | 6L | 114 | 145 | 8.9 | 542 | 27.6 | 11.1 | 250 | Elec | 59.5 | UCDI274K | TAL-A46-D | 2570*1160*1680 | 2050 | 3850*1310*2117 | 2880 |
| VG-C300 | 300 | 240 | 275 | 250 | 6LTAA9.5-G3 | 6L | 116 | 148 | 9.5 | 482 | 28.1 | 55.5 | 262 | Elec | 66.0 | HCI444D | TAL-A46-E | 2550*1020*1790 | 2100 | 4000*1400*2100 | 4150 |
| VG-C330 | 330 | 264 | 300 | 240 | 6LTAA9.5-G1 | 6L | 116 | 148 | 9.5 | 600 | 28.1 | 55.5 | 320 | Elec | 78.0 | HCI444D | TAL-A46-F | 2550*1020*1790 | 2100 | 4000*1400*2100 | 4150 |
| VG-C355 | 355 | 284 | 325 | 260 | 6LTAA9.5-G1 | 6L | 116 | 148 | 9.5 | 600 | 28.1 | 55.5 | 320 | Elec | 78.0 | HCI444ES | TAL-A46-G | 2550*1020*1790 | 2100 | 4000*1400*2100 | 4150 |
| VG-C413 | 412.5 | 330 | 375 | 300 | 6ZTAA13-G3 | 6L | 130 | 163 | 13 | 594 | 45.4 | 23.1 | 380 | Elec | 89.3 | HCI444FS | TAL-A47-A | 3050*1200*1740 | 3260 | 4300*1410*2174 | 4150 |
| VG-C440A | 440 | 352 | 400 | 320 | 6ZTAA13-G2 | 6L | 130 | 163 | 13 | 641 | 45.4 | 23.1 | 415 | Elec | 95.2 | HCI444F | TAL-A47-A | 3050*1200*1740 | 3340 | 4300*1410*2174 | 4230 |
| VG-C475A | 475 | 380 | 438 | 350 | 6ZTAA13-G2 | 6L | 130 | 163 | 13 | 668 | 45.4 | 23.1 | 415 | Elec | 89.1 | HCI544C | TAL-A47-B | 3050*1200*1740 | 3360 | 4300*1410*2174 | 4250 |
| VG-C475B | 475 | 380 | 438 | 350 | 6ZTAA13-G4 | 6L | 130 | 163 | 13 | 668 | 45.4 | 23.1 | 415 | Elec | 91.4 | HCI544C | TAL-A47-B | 3110*1200*1740 | 3400 | 4300*1410*2174 | 4290 |
| VG-C475C | 475 | 380 | 438 | 350 | QSZ13-G2 | 6L | 130 | 163 | 13 | 530 | 45.42 | 23.1 | 440 | Elec | 98.7 | HCI544C | TAL-A47-B | 3100*1360*1920 | 3355 | 4350*1410*2260 | 4300 |
| VG-C500A | 530 | 424 | 500 | 400 | QSZ13-G3 | 6L | 130 | 163 | 13 | 530 | 45.4 | 23.1 | 470 | ECM | 104.8 | HCI544C | TAL-A47-C | 3100*1360*1920 | 3375 | 4350*1410*2260 | 4320 |
| VG-C500B | 500 | 400 | 450 | 360 | QSZ13-G5 | 6L | 130 | 163 | 13 | 535 | 45.4 | 23.1 | 440 | ECM | 98.8 | HCI544C | TAL-A47-B | 3100*1360*1920 | 3395 | 4350*1410*2260 | 4340 |
| VG-C385 | 385 | 308 | 350 | 280 | QSZ13-G6 | 6L | 130 | 163 | 13 | 535 | 45.4 | 23.1 | 350 | ECM | 76.1 | HCI444E | TAL-A46-H | 3100*1360*1920 | 3425 | 4350*1410*2260 | 4370 |
| VG-C400 | 400 | 320 | 363 | 290 | QSZ13-G6 | 6L | 130 | 163 | 13 | 535 | 45.4 | 23.1 | 350 | ECM | 79.1 | HCI444FS | TAL-A46-H | 3100*1360*1920 | 3455 | 4350*1410*2260 | 4400 |
| VG-C440B | 440 | 352 | 400 | 320 | QSZ13-G7 | 6L | 130 | 163 | 13 | 545 | 45.4 | 23.1 | 415 | ECM | 87.0 | HCI444F | TAL-A47-A | 3100*1360*1920 | 3495 | 4350*1410*2260 | 4440 |
| VG-C66 | 66 | 52.8 | 60 | 48 | QSB3.9-G2 | 4L | 102 | 120 | 3.9 | 465 | 10.9 | 7 | 70 | ECU | 19.0 | UCI224E | TAL-A42-H | 1850*980*1500 | 970 | 2670*1080*1905 | 1500 |
| VG-C70 | 70 | 56 | 65 | 52 | QSB3.9-G2 | 4L | 102 | 120 | 3.9 | 465 | 10.9 | 7 | 70 | ECU | 19.0 | UCI224F | TAL-A44-C | 1850*980*1500 | 970 | 2670*1080*1905 | 1500 |
| VG-C88 | 88 | 70.4 | 80 | 64 | QSB3.9-G3 | 4L | 107 | 120 | 3.9 | 430 | 10.9 | 7 | 88 | ECU | 23.0 | UCI224G | TAL-A44-C | 1850*980*1500 | 970 | 2670*1080*1905 | 1500 |
| VG-C110 | 110 | 88 | 100 | 80 | QSB5.9-G2 | 6L | 102 | 120 | 5.9 | 467 | 16.4 | 9 | 106 | ECU | 28.0 | UCI274C | TAL-A44-D | 2140*950*1530 | 1270 | 3200*1080*2000 | 1780 |
| VG-C137.5 | 137.5 | 110 | 125 | 100 | QSB5.9-G3 | 6L | 102 | 120 | 5.9 | 490 | 16.4 | 9 | 132 | ECU | 34.0 | UCI274ES | TAL-A44-E | 2140*950*1530 | 1270 | 3200*1080*2000 | 1780 |
| VG-C165 | 165 | 132 | 150 | 120 | QSB6.7-G3 | 6L | 107 | 124 | 6.7 | 500 | 19.5 | 9.4 | 166 | ECU | 42.0 | UCI274F | TAL-A44-J | 2400*950*1530 | 1380 | 3500*1080*2120 | 2130 |
| VG-C200 | 200 | 160 | 182 | 145.6 | QSB6.7-G4 | 6L | 107 | 124 | 6.7 | 494 | 19.5 | 9.4 | 185 | ECU | 48.0 | UCI274G | TAL-A44-L | 2400*950*1530 | 1380 | 3500*1080*2120 | 2180 |
| VG-C220C | 220 | 176 | 200 | 160 | QSL8.9-G2 | 6L | 114 | 144.5 | 8.9 | 510 | 28.1 | 11.1 | 226 | ECU | 59.0 | UCI274H | TAL-A44-M | 2450*950*1690 | 1760 | 4000*1400*2100 | 4150 |
| VG-C250B | 250 | 200 | 225 | 180 | QSL8.9-G3 | 6L | 114 | 144.5 | 8.9 | 510 | 28.1 | 11.1 | 242 | ECU | 62.0 | UCDI274J | TAL-A46-C | 2450*950*1690 | 1760 | 4000*1400*2100 | 4150 |
| VG-C275B | 275 | 220 | 250 | 200 | QSL8.9-G4 | 6L | 114 | 144.5 | 8.9 | 513 | 28.1 | 11.1 | 258 | ECU | 64.0 | UCDI274K | TAL-A46-D | 2450*950*1690 | 1760 | 4000*1400*2100 | 4150 |
VIGKOO provides diesel generator power spare parts and engineering accessories worldwide, including Cummins, Caterpillar, Perkins, Deutz, Volvo, Doosan and Chinese engine parts, original brand generator Stamford, Leroy-somer, Mecc-alte and other related components, As well as engine spare parts, controller modules, circuit breakers, light towers, external fuel tanks, cables, door locks, antivibration pads, etc., customized ATS systems, parallel control systems, etc.
VIGKOO will bring great enthusiasm and unremitting efforts and committed to becoming a top enterprise in international power accessories.
1. Why Choose us?
Vigkoo has a wide range of cooperative supplier groups. Whether you need to find which power equipment products, Vigkoo can help you quickly enter the Chinese supply system and obtain the latest market products and competitive prices.
2. Delivery Time?
Spare parts about 3-5 days.
Diesel generator set about 30-50 days.
3. Manufacturer or Trade Company?
We have our own factory for OEM manufacture producing, also trade with all electrical parts.
4. Global Warranty?
Yes, usually global warranty 1 year / 1000 hours.
Provide extended warranty service for 2 years / 2000 hours, 3 years, 5 year ... ...
5. Payment terms?
L/C, T/T, Western Union, PayPal
6. Customized service?
Provide customized services according to the customer requirements
