3. Press the "power button", you can see the LCD reticle light up, aim at the distant target through the "+" word sight of the LCD reticle, and press the "power button" again to display the target distance, this is a single measurement.
4. Switch between distance unit meters and yards by long press the "mode button". Press the "mode button" and the word SCAN appears, and then press the "power button" to enter the scan mode for continuous distance measurement, and press the "mode button" again to close the scan mode. Long press the "power button" to turn off the measurement or let it stand for 8 seconds to automatically turn off.
5. By adjusting the "windage knob" or "elevation knob", the "+"center of the LCD reticle coincides with the "+" center of the five-line reticle to measure the distance and angle information of the target.Rotate the "windage knob" clockwise or counterclockwise according to the wind direction information, the round handle on the top of the knob is marked with "R".Then turn the "elevation knob" clockwise or counterclockwise according to the distance and angle information, the round handle on the top of the knob is marked with "UP". After adjusting the two knobs, turn the round handle marked "R"/"UP" on the top clockwise to lock the knob, and turn the round handle counterclockwise to unlock it. After adjusting the two knobs, use the "+" center of the five-line reticle to aim at the target and shoot.