Centrifugal Spray Dryer, L Dryer Machine for Raw Pharmaceutical and Chemical

Min.Order: 1
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 10000 ~ 1000000

Description
Centrifugal Spray Dryer for extract,
Chemical Dryer Machine for Raw Pharmaceutical and Raw Chemical Materials extrats 

 
Technical parameters of ZPG-150 type centrifugal spray dryer and matching equipment.
2. 1 Centrifugal spray dryer:
Model of drying tower: zpg-150;
Inner diameter of drying tower:φ3.85M, outer diameter of drying tower:φ4.0m;
Height of main tower: 9.9m (about 2m of tower top maintenance space is not included);
Operating wind speed in the tower: ~ 0.15m/s;(general value range: 0.13-0.25m/s)
High speed centrifugal atomizer: lhx-150 type,
Atomizing disc diameter: 160mm, rotating speed: 13000-18000r / min,
Power: 5.5kW, variable frequency speed regulation, material: 316;
Cold air jacket thickness: 60mm, thermal insulation material: aluminum silicate;
Accessories: one manhole cleaning door, two sight glass observation holes, one vibration motor of tower body rapping device, 0.2KW.
Supporting gas scavenging device:
Vortex air pump: power 5.5kw, air flow 360m3 / h, air pressure 40000 PA
  Small electric heating power: 12KW
  Pipe diameter:φ76mm
  Rotating motor of air scavenging duct: 0.75KW, rotating speed: 5R / min

2.2 Supporting air filter:
Filter grade: 100000;
Structural form: square air duct type, flange connection;
Long term withstand temperature: 320 ºC;
Installation position: behind the electric heater;
Protective measures: the non-woven fabric is used for the initial filtration of the front channel to intercept some large particles in the air and prolong the service life of the 100 grade air filter.
2.3  Supporting steam radiator: 300 square meters
2.4 Supporting electric heater: (optional)
Model: dr-297;
Maximum heat output: ≤ 25.8×104 kcal/h;
Power: 297kw;
Overall dimension: 3060×seven hundred×950mm.
2.5 Supporting single screw pump:
Model: g25-1; Speed: 960r / min; Flow: 2 m3 / h; Pressure: 0.6MPa; Power: 1.5kw, equipped with frequency converter to control speed; Lift 60m.Note: it is connected with the discharge port of the mixing drum, and the mixing power is 1.1KW.
2.6 Supporting primary cyclone separator:
Form: high efficiency cyclone separator
  Specification: XLP / b-φnine hundred
  Treatment air volume: 7000m3 / h
  Inlet gas velocity: 18m / S
Discharge: 304 stainless steel fan off, 2.8L, 1, 0.75kw
2.7 Supporting secondary cyclone separator:
Form: diffusion cyclone separator
  Specification: XLP / b-φeight hundred and fifty
  Treatment air volume: 7000m3 / h
  Inlet gas velocity: 20m / S
Discharge: 304 stainless steel fan off, 2.8L, 1, 0.75kw
2.8 Supporting forced draft fan:
Model: 4-72no45A speed: 2900rpm
Air volume: 5712-10562m3 / h total pressure: 2554-1673pa
Quantity: 1 motor power: 7.5kw
Accessories: 1 damper
Collecting wind: from the top outlet of the spray tower jacket, the air inlet pipe is connected, which is equivalent to a pre heating, which not only achieves the purpose of cooling tower wall, but also saves energy.
2.9 Supporting induced draft fan:
Model: 9-26no56A speed: 2900rpm
Air volume: 7766-9500m3 / h total pressure: 7218-6527pa
Quantity: 1 motor power: 30KW
Accessories: 1 damper
2. 10 Supporting water film dust collector:
Specifications:Фone thousand×3600mm;
Quantity: 1 set
Water pump power: 0.75KW flow: 5.6m3/h
  Accessories: connecting pipe, liquid level gauge, etc
2.11 Supporting insulation:
Thermal insulation material: rock wool
Insulation thickness: hot air pipe insulation 80mm
2.12 Receiving system:
Blower1.5kwstainless steel1platformChangzhou 
Air filter 304. 10W grade1setChangzhou GuoyiHigh temperature resistance
Primary, medium and sub high efficiency
Rotary dehumidifier350Inlet runner1setChangzhou 
Electric heating12kw3041setGaoyou XinyaElectric heating box
Vortex valve 3162onlyChangzhoucustomized
cyclone separatorφfour hundred316 3mm1platformChangzhouIncluding double disc valve
The Conduitφone hundred and fifty3161setChangzhouIncluding clamp type interface
Induced draft fan2.2kwstainless steel1platformChangzhouIncluding sewage outlet
 
3.  Main configuration list of ZPG-150 type centrifugal spray dryer for extract.
NonameSpecificationstexture of materialquantityremarks
1Main cylinderΦfour thousand×4200 / the cylinder is equipped with observation and cleaning door, lighting lamp and jacket coolingInner SUS316
External carbon
Skeleton carbon steel
1setThickness: 2.5mm inside, 1.5mm cold air jacket, 0.8mm outside the A3 plate, 0.2KW 1 vibrating motor
2Electric heating box stainless steel1setThermal insulation, 297kw
3Hot air duct360-360Inner SUS316
Outer carbon steel
1setheat preservation
4Forced draft fan4-72-4.5Astainless steel1platformWith air regulating valve, 7.5kw
5Medium efficiency filterNon woven fabricSUS3041set 
6High efficiency filterHigh temperature fiber filter paperSUS3041set100000 level purification
7Feeding screw pumpG25-1SUS3161setVariable frequency speed regulation, 1.5kw
8AtomizerLHX-200SUS3161setVariable frequency speed regulation, 5.5kw
9Liquid drum with mixing material1000LSUS3161set1.1Kw
10Gas sweeping deviceMatchingSUS3161set18.25Kw
12Primary cyclone separatorCLP/B-900SUS3161set 
11Secondary cyclone separatorCLP/B-850SUS3161set 
12Double butterfly valve silo SUS3162set 
13Pipeline from main cylinder to cyclone separatorΦthree hundred and eighty-eightSUS3161set 
14Air swept high efficiency filterHigh temperature fiber filter paperSUS3041set10000 grade purification
15Induced draft fan9-26-5.6AA31setWith air regulating valve, 30KW
16Induced draft ductΦfour hundredA31set 
17Support and platform A31set15m-5.15m-5.2m
18Stairs and handrails A31set 
19Control cabinetchintA31set 
20Hardware, seals, etc  1set 
21Spray dust collectorSM-10SUS3161set 
Product Tag:
Related categories:
Scroll to Top