Description
Function of CKD-PLUV-10, V21.07:
- Cut plastic, thin glass, paper and so on.
- Surface peeling.
- Marking logo, series number, QR code, bar code, bit map (photo / picture) on almost material, including glass, PCB, PVC, PC, leather, wood, stone, jade and so on.
- Support file of ai, plt, dxf, dst, svg, nc, g, jpg, png, text, and excel.
- Automatically jump number and generate code.
Advantage CKD-PLUV-10, V21.07:
- Portable and big power of 10W UV.
- Independent combination: can load kinds of devices, such as motorized X-axis, Y-axis, Z-axis, R-axis or manual X, Y, Z.
- Co-work with your equipment: can be installed on food machine, packing machine, automobile accessory machine and so on.
* Optional marking scope:100*100/150*150/200*200mm
* Water-cooling
* Support 220V, 50Hz or 110V, 60Hz.
What should I install after receiving this machine? Easy three steps:
- Install on Z-axis column on base board and laser source on Z-axis.
- Water in chiller and link to laser source.
- Install marking software in your computer.
Optional devices:
Position bar: CKD-PB01, for fixing material and mark on the same location on material.
Rotary for jewelry: CKD-RF00-50, chuck diameter is 50mm
Rotary for big material: CKD-FR01-80H, chuck diameter is 80mm
Manual X-Y table: CKD-MT2D, for slightly moving location
Cutting fixture: CKD-TMFG, for clapping thin material during cutting or engraving, to avoid transformation
Laser protect goggle: CKD-LP01, 200-450 & 800-2000nm multi-wavelength protection, OD4+.
The marking software is EzCad2, support Windows 7/10, with languages of Chinese, English, Japanese, and Korean.
Optional LED focus tools, built-in galvanometer (marking head) or not.Configuration:| Model | CKD-PLUV-10 |
| Version | V21.07 |
| Laser source | UV laser, 10W |
| Marking scope | Optional: 100*100/150*150/200*200 |
| Marking software | EzCad2 |
| Cooling model | Water-cooling |
| Electricity | Optional: 220V, 50Hz or 110V, 60Hz |
| Expand function | Optional: motorized X-axis / Y-axis / Z-axis |
How to choose marking scope, are focus tools necessary?
Cutting: 100*100mm
Deeply engraving: 100*100mm
Surface marking / printing: 100*100/150/150/200*200mm, depend on your maximum logo / figure / marking content.
Complaint
