Specification | Unit | Model | |||
JK42BL30 | JK42BL60 | JK42BL85 | JK42BL93 | ||
Number Of Phase | Phase | 3 | |||
Number Of Poles | Poles | 8 | |||
Rated Voltage | VDC | 24 | 36 | 24 | 24 |
Rated Speed | Rpm | 3500 | 4000 | 4000 | 6300 |
Rated Torque | mN.m | 18 | 80 | 150 | 115 |
Rated Power | W | 6.5 | 32 | 62 | 76 |
Peak Torque | mN.m | 60 | 240 | 450 | 500 |
Peak Current | Amps | 1.5 | 5 | 7.5 | 10 |
Torque Constant | mN.m/A | 48.7 | 38.5 | 38.6 | 28.7 |
Rotor Inertia | g.cm2 | 15.6 | 33 | 84 | 94 |
Body Length | mm | 30 | 60 | 85 | 93 |
Weight | Kg | 0.25 | 0.35 | 0.7 | 0.8 |
Sensor | Honeywell | ||||
Insulation Class | B | ||||
Degree of Protection | IP30 | ||||
Storage Temperature | -25~+70ºC | ||||
Operating Temperature | -15~+50ºC | ||||
Working Humidity | 85% RH or below (no condensation) | ||||
Working Environment | Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust | ||||
Altitude | 1000 meters or less |
Specification | Unit | Model | |||
JK42BLS01 | JK42BLS02 | JK42BLS03 | JK42BLS04 | ||
Number Of Phase | Phase | 3 | |||
Number Of Poles | Poles | 8 | |||
Rated Voltage | VDC | 24 | |||
Rated Speed | Rpm | 4000 | |||
Rated Torque | N.m | 0.0625 | 0.125 | 0.185 | 0.25 |
Peak Current | Amps | 1.8 | 3.3 | 4.8 | 6.3 |
Rated Power | W | 26 | 52.5 | 77.5 | 105 |
Peak Torque | N.m | 0.19 | 0.38 | 0.56 | 0.75 |
Peak Current | Amps | 5.4 | 10.6 | 15.5 | 20 |
Back E.M.F | V/Krpm | 4.1 | 4.2 | 4.3 | 4.3 |
Torque Constant | N.m/A | 0.039 | 0.04 | 0.041 | 0.041 |
Rotor Inertia | g.cm2 | 24 | 48 | 72 | 96 |
Body Length | mm | ||||
Weight | Kg | ||||
Sensor | Honeywell | ||||
Insulation Class | B | ||||
Degree of Protection | IP30 | ||||
Storage Temperature | -25~+70ºC | ||||
Operating Temperature | -15~+50ºC | ||||
Working Humidity | 85% RH or below (no condensation) | ||||
Working Environment | Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust | ||||
Altitude | 1000 meters or less |
42JXE100K | |
Ring material | Metal / Powder metal |
Bearing at output | Ball bearings |
Max. Radial (12mm from flange) | 200N |
Max. shaft axial load | 100N |
Radial play of shaft (near to flange) | ≤0.06mm |
Axial play of shaft | ≤0.3mm |
Backlash at no-load | ≤2.5° |
Shaft press fit force, max | 150N |
Bldc Motor Shaft Pinion Specifications | ||
Module | 0.6 | |
No. of teeth | 11 | 17 |
Pressure angle | 20° | |
Hole diameter | Φ3.16 Φ3.98 Φ4.48 | |
Reduction ratio | 1/5.18 1/19 1/27 1/71 1/100 1/139 1/253 1/305 1/354 1/426 1/495 1/596 | 1/3.71 1/14 1/51 1/181 1/218 |
Gearbox Specifications: | ||||||
Reduction ratio | Exact reduction ratio | Rated tolerance torque | Max momentary tolerance torque | Efficiency | L (mm) | Weight (g) |
1/3.7 1/5.2 | 1/3.71 1/5.18 | 1.0 N.m Max | 3.0 N.m | 90% | 31.5±0.5 | 244 |
1/14 1/19 1/27 | 1/13.73 1/19.20 1/26.85 | 4.0 N.m Max | 12 N.m | 0.81 | 42.1±0.5 | 314 |
1/51 1/71 1/100 1/139 | 1/50.89 1/71.16 1/99.51 1/139.14 | 8.0 N.m Max | 25 N.m | 73% | 52.5±0.5 | 433 |
1/181 1/218 1/253 1/305 1/354 1/426 1/495 1/596 | 1/180.96 1/218.12 1/253.03 1/304.99 1/353.80 1/426.46 1/494.71 1/596.31 | 10 N.m Max | 30 N.m | 0.66 | 62.9±0.5 | 519 |
Input & output same rotation direction; Motor Max. input speed: <8000rpm; Operating temperature range: -15ºC ~ +80ºC |
Electrical Specification: | |||||
Specification | PLE42-L1 | ||||
Model | PLE42-03 | PLE42-04 | PLE42-05 | PLE42-07 | PLE42-010 |
Reduction Ratio | 3:1 | 4:1 | 5:1 | 7:1 | 10:1 |
Output Torque | 8N.m | 9N.m | 9N.m | 5N.m | 5N.m |
Fail-stop Torque | 16N.m | 18N.m | 18N.m | 10N.m | 10N.m |
Suitable Motor | Φ5-10 / Φ22-2 / F31-M3 | ||||
Rated Input Speed | 3000min-1 | ||||
Max Input Speed | 6000min-1 | ||||
Average Lifespan | 20000h | ||||
Backlash | ≤15arcmin | ||||
Efficiency | 0.96 | ||||
Noise | ≤55dB | ||||
Work Temperature | -10°~+90° | ||||
Degree of Protection | IP54 | ||||
Weight | 0.25kg |
Electrical Specification: | ||||||
Specification | PLE42-L2 | |||||
Model | PLE42-012 | PLE42-015 | PLE42-016 | PLE42-020 | PLE42-025 | PLE42-028 |
Reduction Ratio | 12:1 | 15:1 | 16:1 | 20:1 | 25:1 | 28:1 |
Output Torque | 10N.m | 10N.m | 12N.m | 12N.m | 10N.m | 10N.m |
Fail-stop Torque | 20N.m | 20N.m | 24N.m | 24N.m | 20N.m | 20N.m |
Model | PLE42-035 | PLE42-040 | PLE42-050 | PLE42-070 | PLE42-100 | / |
Reduction Ratio | 1.459027778 | 1.667361111 | 2.084027778 | 2.917361111 | 4.167361111 | / |
Output Torque | 10N.m | 10N.m | 10N.m | 10N.m | 10N.m | / |
Fail-stop Torque | 20N.m | 20N.m | 20N.m | 20N.m | 20N.m | / |
Suitable Motor | Φ5-10 / Φ22-2 / F31-M3 | |||||
Rated Input Speed | 3000min-1 | |||||
Max Input Speed | 6000min-1 | |||||
Average Lifespan | 20000h | |||||
Backlash | ≤20arcmin | |||||
Efficiency | 94% | |||||
Noise | ≤55dB | |||||
Work Temperature | -10°~+90° | |||||
Degree of Protection | IP54 | |||||
Weight | 0.35kg |
JK42BLS01 - JK42BLS03 Drive Electrical Performance: | ||
Function | Specification | |
Speed Methods | VSP | PWM |
Power Supply | 12~36V input allowed | 12~36V input allowed |
Speed Signal | 0~10Vdc analog speed input | Support PWM 100HZ~1K |
Output Current | Peak 5A | Peak 5A |
Output Speed | Closed loop speed 4000rpm | Closed loop speed 4000rpm |
JK42BLS04 Drive Electrical Performance: | ||
Function | Specification | |
Speed Methods | VSP | PWM |
Power Supply | 12~36V input allowed | 12~36V input allowed |
Speed Signal | 0~10Vdc analog speed input | Support PWM 100HZ~1K |
Output Current | Peak 5A | Peak 5A |
Output Speed | Closed loop speed 3000rpm | Closed loop speed 3000rpm |
Specification | Unit | Model | ||||
JK57BLS005 | JK57BLS01 | JK57BLS02 | JK57BLS03 | JK57BLS04 | ||
Number Of Phase | Phase | 3 | ||||
Number Of Poles | Poles | 4 | ||||
Rated Voltage | VDC | 36 | ||||
Rated Speed | Rpm | 4000 | ||||
Rated Torque | N.m | 0.055 | 0.11 | 0.22 | 0.33 | 0.44 |
Rated Current | Amps | 1.2 | 2 | 3.6 | 5.3 | 6.8 |
Rated Power | W | 23 | 46 | 92 | 138 | 184 |
Peak Torque | N.m | 0.16 | 0.33 | 0.66 | 1 | 1.32 |
Peak Current | Amps | 3.5 | 6.8 | 11.5 | 15.5 | 20.5 |
Back E.M.F | V/Krpm | 7.8 | 7.7 | 7.4 | 7.3 | 7.1 |
Torque Constant | N.m/A | 0.074 | 0.073 | 0.07 | 0.07 | 0.068 |
Rotor Inertia | g.cm2 | 30 | 75 | 119 | 173 | 230 |
Body Length | mm | 37 | 47 | 67 | 87 | 107 |
Weight | Kg | 0.33 | 0.44 | 0.75 | 1 | 1.25 |
Sensor | Honeywell | |||||
Insulation Class | B | |||||
Degree of Protection | IP30 | |||||
Storage Temperature | -25~+70ºC | |||||
Operating Temperature | -15~+50ºC | |||||
Working Humidity | 85% RH or below (no condensation) | |||||
Working Environment | Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust | |||||
Altitude | 1000 meters or less |
Specification | Unit | Model | |||
JK60BLS01 | JK60BLS02 | JK60BLS03 | JK60BLS04 | ||
Number Of Phase | Phase | 3 | |||
Number Of Poles | Poles | 8 | |||
Rated Voltage | VDC | 48 | |||
Rated Speed | Rpm | 3000 | |||
Rated Torque | N.m | 0.3 | 0.6 | 0.9 | 1.2 |
Rated Current | Amps | 2.8 | 5.2 | 7.5 | 9.5 |
Rated Power | W | 94 | 188 | 283 | 377 |
Peak Torque | N.m | 0.9 | 1.8 | 2.7 | 3.6 |
Peak Current | Amps | 8.4 | 15.6 | 22.5 | 28.5 |
Back E.M.F | V/Krpm | 12.1 | 12.6 | 12.4 | 13.3 |
Torque Constant | N.m/A | 0.116 | 0.12 | 0.118 | 0.127 |
Rotor Inertia | kg.cm2 | 0.24 | 0.48 | 0.72 | 0.96 |
Body Length | mm | 78 | 99 | 120 | 141 |
Weight | Kg | 0.85 | 1.25 | 1.65 | 2.05 |
Sensor | Honeywell | ||||
Insulation Class | B | ||||
Degree of Protection | IP30 | ||||
Storage Temperature | -25~+70ºC | ||||
Operating Temperature | -15~+50ºC | ||||
Working Humidity | 85% RH or below (no condensation) | ||||
Working Environment | Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust | ||||
Altitude | 1000 meters or less |
Specification | Unit | Model | |||
JK80BLS01 | JK80BLS02 | JK80BLS03 | JK80BLS04 | ||
Number Of Phase | Phase | 3 | |||
Number Of Poles | Poles | 4 | |||
Rated Voltage | VDC | 48 | |||
Rated Speed | Rpm | 3000 | |||
Rated Torque | N.m | 0.35 | 0.7 | 1.05 | 1.4 |
Rated Current | Amps | 3 | 5.5 | 8 | 10.5 |
Rated Power | W | 110 | 220 | 330 | 440 |
Peak Torque | N.m | 1.05 | 2.1 | 3.15 | 4.2 |
Peak Current | Amps | 9 | 16.5 | 24 | 31.5 |
Back E.M.F | V/Krpm | 13.5 | 13.3 | 13.1 | 13 |
Torque Constant | N.m/A | 0.13 | 0.127 | 0.126 | 0.124 |
Rotor Inertia | g.cm2 | 210 | 420 | 630 | 840 |
Body Length | mm | 78 | 98 | 118 | 138 |
Weight | Kg | 1.4 | 2 | 2.6 | 3.2 |
Sensor | Honeywell | ||||
Insulation Class | B | ||||
Degree of Protection | IP30 | ||||
Storage Temperature | -25~+70ºC | ||||
Operating Temperature | -15~+50ºC | ||||
Working Humidity | 85% RH or below (no condensation) | ||||
Working Environment | Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust | ||||
Altitude | 1000 meters or less |
Specification | Unit | Model | ||||
JK86BLS58 | JK86BLS71 | JK86BLS84 | JK86BLS98 | JK86BLS125 | ||
Number Of Phase | Phase | 3 | ||||
Number Of Poles | Poles | 8 | ||||
Rated Voltage | VDC | 48 | ||||
Rated Speed | Rpm | 3000 | ||||
Rated Torque | N.m | 0.35 | 0.7 | 1.05 | 1.4 | 2.1 |
Rated Current | Amps | 3 | 6.3 | 9 | 11.5 | 18 |
Rated Power | W | 110 | 220 | 330 | 440 | 660 |
Peak Torque | N.m | 1.05 | 2.1 | 3.15 | 4.2 | 6.3 |
Peak Current | Amps | 9 | 19 | 27 | 35 | 54 |
Back E.M.F | V/Krpm | 13.7 | 13 | 13.5 | 13.7 | 13.5 |
Torque Constant | N.m/A | 0.13 | 0.12 | 0.13 | 0.13 | 0.13 |
Rotor Inertia | g.cm2 | 400 | 800 | 1200 | 1600 | 2400 |
Body Length | mm | 71 | 84.5 | 98 | 111.5 | 138.5 |
Weight | Kg | 1.5 | 1.9 | 2.3 | 2.7 | 4 |
Sensor | Honeywell | |||||
Insulation Class | B | |||||
Degree of Protection | IP30 | |||||
Storage Temperature | -25~+70ºC | |||||
Operating Temperature | -15~+50ºC | |||||
Working Humidity | 85% RH or below (no condensation) | |||||
Working Environment | Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust | |||||
Altitude | 1000 meters or less |
Specification | Unit | Model | |||
JK110BLS050 | JK110BLS75 | JK110BLS100 | JK110BLS125 | ||
Number Of Phase | Phase | 3 | |||
Number Of Poles | Poles | 8 | |||
Rated Voltage | VDC | 310 | |||
Rated Speed | Rpm | 3400 | |||
Rated Torque | N.m | 2.38 | 3.3 | 5 | 6.6 |
Rated Current | Amps | 0.5 | 0.6 | 0.8 | 1 |
Rated Power | KW | 0.75 | 1.03 | 1.57 | 2.07 |
Back E.M.F | V/Krpm | 91.1 | 91.1 | 91.1 | 88.6 |
Torque Constant | N.m/A | 0.87 | 0.87 | 0.87 | 0.845 |
Body Length | mm | 130 | 155 | 180 | 205 |
Sensor | Honeywell | ||||
Insulation Class | H |
Changzhou Jkongmotor Co., Ltd was a high technology industry zone in changzhou, china. Our products used in many kinds of machines, such as 3d printer CNC machine, medical equipment, weaving printing equipments and so on.
JKONGMOTOR warmly welcome 'OEM' & 'ODM' cooperations and other companies to establish long-term cooperation with us.
Company spirit of sincere and good reputation, won the recognition and support of the broad masses of customers, at the same time with the domestic and foreign suppliers close community of interests, the company entered the stage of stage of benign development, laying a solid foundation for the strategic goal of realizing only really the sustainable development of the company.
Equipments Show:
Production Flow:
Package:
Certification: